Direct Measurement of Transformation Zone Strains in Toughened Zirconia

Residual strains responsible for crack tip shielding have been measured within transformation zones surrounding cracks in Mg-PSZ. Two techniques were used for strain measurement: moiré interferometry and high-resolution image matching. Both methods provide maps of differential in-plane displacements within the specimen surface intersected by the crack, the latter method with the higher resolution. The results are compared with finite-element analysis to assess surface relaxation effects, and the measured strains are used to evaluate the crack tip shielding stress intensity factor. Calculations based on the assumption that the unconstrained transformation strain is hydrostatic dilatation yielded results that were significantly smaller than the measured toughness increases.     

Cyclic Fatigue-Crack Propagation in Magnesia-Partially-Stabilized Zirconia Ceramics

The subcritical growth of fatigue cracks under (tension-tension) cyclic loading is demonstrated for ceramic materials, based on experiments using compact C(T) specimens of a MgO-partially-stabilized zirconia (PSZ), heat-treated to vary the fracture toughness K _c from ∼3 to 16 MPa·m^1/2 and tested in inert and moist environments. Analogous to behavior in metals, cyclic fatigue-crack rates (over the range 10⁻¹¹ to 10⁻⁵ m/cycle) are found to be a function of the stress-intensity range, environment, fracture toughness, and load ratio, and to show evidence of fatigue crack closure. Unlike toughness behavior, growth rates are not dependent on through0-thickness constraint. Under variable-amplitude cyclic loading, crack-growth rates show transient accelerations following low-high block overloads and transient retardations following high-low block overloads or single tensile overloads, again analogous to behavior commonly observed in ductile metals. Cyclic crack-growth rates are observed at stress intensities as low as 50% of K _c , and are typically some 7 orders of magnitude faster than corresponding stress-corrosion crack-growth rates under sustained-loading conditions. Possible mechanisms for cyclic crack advance in ceramic materials are examined, and the practical implications of such "ceramic fatigue" are briefly discussed.     

The days ahead

How are government controls affecting healthcare foodservices?Are growing elderly & outpatient populations changing foodservices' missions. What are the hottest trends? As members of the American Society for Hospital Food Service Administrators prepared for their annual meeting in Orlando, FM queried 11 Southeastern directors to learn their most pressing concerns & how they are positioning their departments for the future.     

The determination of crack bridging forces

A method is presented for determining the bridging tractions acting on the fracture surfaces of cracks from measurements of the crack opening profile. The tractions may be expressed either as a function (x) of position in the crack or a function p(u) of the crack opening displacement. The feasibility of deducing (x) or p(u) from noisy displacement data is demonstrated by numerical simulations. It is found that the most complete information is contained in profiles of cracks growing from notches. Improved estimates of p(u) can also be found by analzying data from several cracks at different stress levels simultaneously.     

Taconite Pellets in the Blast Furnace

A summary of a ten-year test program utilizing pilot-plant taconite pellets in experimental and commercial blast furnaces, this paper presents operating data and results of this program, as well as results obtained in recent years with commercial taconite pellets.     

Midinfrared modulation through the use of field-induced scattering in ferroelectric liquid crystals

The feasibility of the use of modulation devices based on field-induced transient scattering in ferroelectric liquid crystals (LC) to replace mechanical choppers used in uncooled infrared-imaging systems was investigated. Devices fabricated with ITO-coated ZnSe substrates and a ferroelectric LC path length of 25 μm were able to modulate optical radiation by transient forward scattering at rates approaching 20 kHz. Through the use of a commercial arbitrary waveform generator and associated PC-based software, drive waveforms were developed that produced a variable, square-wave optical-modulation pattern by the extension of the duration of the scattering state to periods ranging from hundreds of microseconds to milliseconds. The ability of these extended-scattering-mode (ESM) devices to modulate radiation in both the visible and midinfrared regions was verified in a simple experiment through the use of a Fourier-transform infrared spectrometer, in which an unoptimized ESM device displayed a 40% modulation dep th for IR radiation in the 8-12-μm region.     

Analysis of Bence Jones proteinuria by high resolution two-dimensional electrophoresis

Analysis of Bence Jones proteinuria by high resolution two-dimensional electrophoresis (2-DE) and immunoblotting reveals a complex pattern of light chain (LC) isoforms corresponding to the free monoclonal Bence Jones protein and its fragments. Replica blotting gives duplicate blots for LC typing (lambda, chi) and, under the conditions employed, leaves sufficient protein for Coomassie Blue staining of the urinary protein profile and pIIMr determination of the LC isoforms. Carrier ampholytes (CAs, in our "simplified" 2-DE system) and immobilised pH gradients (IPGs, in the Multiphor 2-DE system) give similar LC isoform patterns. Artifacts, including cone-like distortions and trailing "piggyback" spots, are visualised with both 2-DE systems. IPGs are advantageous as they allow reproducible detection of strongly basic LC isoforms by isoelectric focusing (under equilibrium conditions) without recourse to CA nonequilibrium pH gradient electrophoresis.     

Visuospatial neglect: the ultimate deconstruction?

Unilateral visuospatial neglect is now widely acknowledged to be a highly heterogeneous condition: The overt manifestations of visual neglect can vary as a function of task, spatial domain, and mode of response (at least). Double dissociations (sometimes of the strong form) have already been reported between most of the components of what was originally thought to be a relatively stable construct within the visual modality. Nonetheless, throughout successive fractionations of neglect, reported cases of bidirectional task-specific neglect after unilateral brain damage are rare. We now report two such cases. After right hemisphere stroke, the first patient reliably showed severe left neglect on cancellation but right neglect on line bisection. After left hemisphere stroke, the second case showed right neglect on cancellation but left neglect on line bisection. Extensive investigation of case 1 confirmed our previous conjecture that the crucial distinction between these tasks lies in the presence or the absence of an overt target. In contrast to cancellation, line bisection demands the internal computation of the location of the "target" (the midpoint), followed by executing a motor response toward the precise location of that "imaginary" midpoint. The relative attentional and premotor contributions of the intact and damaged hemispheres to these forms of bidirectional neglect are also assessed.     

Pinhole-array x-ray spectrometer for laser-fusion experiments

A pinhole-array x-ray spectrometer for laser-fusion experiments is demonstrated. An array of approximately 300 pinholes is placed in front of a flat-crystal spectrometer, yielding target images at photon energies ~10 eV apart (for photon energies of ~4 to 5 keV). For wideband radiation the images are two dimensional, whereas when a single spectral line is used, the field of view in the direction of dispersion is limited. However, single spectral line images can have a field of view sufficient for imaging the compressed target core. We show the image at the Ti-Kalpha-line fluorescence from a Ti-doped shell, which we show to be excited by continuum radiation from the compressed core. The Kalpha image delineates the cold, compressed shell at peak compression, which can otherwise be obtained only through backlighting. In addition, the array provides spectra of high spectral resolution because of the reduction in the effective source size.