英国国家公园内住宅建设管控政策研究

住宅是社区管理的重要物质载体,住宅建设管控是国家自然保护地体系建设的重要部分,英国国家公园内住宅建设管控的经验能为我国自然保护地社区管理带来新思路,有助于解决我国自然保护地人口聚居的问题.梳理英国国家公园内住宅建设管控背景,引介英国国家公园内住宅建设管控政策,借鉴强制管制结合柔性引导的管控经验,丰富我国自然保护地体系建设中住宅建设管控的思路.     

矢量信号发生器射频动态切换系统设计

目前提出的矢量信号发生器射频动态切换系统射频动态切换时长过长,功率损耗较高。为解决上述问题,基于时分复用(TDM)技术对矢量信号发生器射频动态切换系统进行设计,应用AV1443矢量信号发生器作为矢量信号发生器,在设计的过程中应用程序发送芯片将矢量信号的信息统一化处理,并设计具有信息转换的数据输出与输入端口,在多途径的环境中进行射频状态的动态计算,引用离散傅里叶算法对矢量信号的射频动态进行表达分析。实验结果表明,基于TDM的矢量信号发生器射频动态切换系统能够缩短切换时长,降低功率损耗,所提系统切换时长在相同的工作频率状态下领先传统系统0.02 s,且所提系统完成整套切换任务后的功率消耗始终控制在1 W以内。     

弧焊机器人焊接系统的研制与应用

本文介绍弧焊机器人焊接系统的研制及应用。该系统与示教再现型机器人配套,适于CO_2焊接。它采用高性能晶闸管式弧焊电源和推拉丝式送丝机,通过接口盒与机器人控制器通讯,能检测多种故障和报警。经反复试验和生产现场使用,证明该系统性能优良,工作可靠,焊接质量高,成本低,可实现国产化,替代进口产品。     

大分子相容剂在填充聚烯烃中的应用

综述了国内外大分子相容剂在填充聚烯烃塑料中的应用，以及大分子相容剂改性填充聚烯烃塑料的物理与力学性能；指出大分子相容剂用于填充塑料，能改善高分子基体与填料间界面粘结，提高填充塑料复合材料的物理与力学性能，比传统有机偶联剂更具特点。     

Synthesis of polyethylene oxide end‐capped with perfluoroalkyl groups/polystyrene prototype brushes

Polystyrene (PS)/poly(ethylene oxide) (PEO) prototype brushes were prepared by alternating free‐radical copolymerization of methacryloyl‐terminated PS and α‐vinylbenzyl‐ω‐hydroxy or α‐vinylbenzyl‐ω‐perfluoroalkyl (R_f) PEO macromonomers with the addition of Lewis acid (SnCl₄). It was found from their dilute‐solution properties that PS/PEO end‐capped with R_f (PBR_f), and PS/PEO having OH groups at terminal ends (PBOH) prototype brushes formed a single molecule in benzene and aggregates in chloroform, respectively. However, the brush PBOH formed a single molecule in N,N‐dimethylformamide. Such aggregation behaviors seemed to be caused by the interaction between hydroxy groups of PEO chain ends. The brush PBOH was also converted into PBR_f‐type brush by chemical modification, using corresponding acid chloride. The substitution of R_f groups was ～70% due to slipping of terminal hydroxy groups into PEO internal domains. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 100: 772–778, 2006     

聚丙烯熔融特性与MDSC条件的相关性

用调制式差示扫描量热法研究了聚丙烯(PP)升温过程熔融特性与线性升温速率（β)、温度调制振幅（AT)和调制周期(p)的相关性。实验结果表明，在低β时，总热流部分PP熔融呈现双峰；β加快时，呈现单熔融峰。随β加快，不可逆热流部分熔融热(△H)增加；可逆热流部分出现明显的放热峰。随p延长，总热流部分和不可逆热流部分的熔融峰温(Tp)基本不变，起始熔融温度(Ton)降低；但△H前者不变，后者增加；可逆热流部分从吸热变成放热，放热峰温移向高温。总热流和不可逆热流部分的Tp和Ton不受AT的影响，但随AT增大△H前者不变，后者降低。     

Reconstructing the World’s Museums

Virtual exploration tools for large indoor environments (e.g. museums) have so far been limited to either blueprint-style 2D maps that lack photo-realistic views of scenes, or ground-level image-to-image transitions, which are immersive but ill-suited for navigation. On the other hand, photorealistic aerial maps would be a useful navigational guide for large indoor environments, but it is impossible to directly acquire photographs covering a large indoor environment from aerial viewpoints. This paper presents a 3D reconstruction and visualization system for automatically producing clean and well-regularized texture-mapped 3D models for large indoor scenes, from ground-level photographs and 3D laser points. The key component is a new algorithm called “inverse constructive solid geometry (CSG)” for reconstructing a scene with a CSG representation consisting of volumetric primitives, which imposes powerful regularization constraints. We also propose several novel techniques to adjust the 3D model to make it suitable for rendering the 3D maps from aerial viewpoints. The visualization system enables users to easily browse a large-scale indoor environment from a bird’s-eye view, locate specific room interiors, fly into a place of interest, view immersive ground-level panorama views, and zoom out again, all with seamless 3D transitions. We demonstrate our system on various museums, including the Metropolitan Museum of Art in New York City—one of the largest art galleries in the world.     

Interfacial shear strength of C/C composites

Fiber-bundle push-out, single-fiber push-in, and single-fiber push-out tests were conducted in order to examine the applicability of these methods for determining the interfacial shear strength of carbon-carbon composites. The fiber-bundle push-out test resulted mostly in fractures along the fiber/matrix interface but created a small amount of fractures in the matrix. Hence, the evaluated strength was regarded as an approximate value. In order to precisely evaluate the interfacial strength, push-in and push-out tests for a single fiber were performed using a micro-Vickers indentation tester. In these tests, the load has to be placed within a target fiber, and the indentation should not extend to the matrix. This condition restricted the load that could be applied to a carbon fiber. Within this limit, a single carbon fiber could not be pushed-in. For the sake of load reduction, single-fiber push-out tests were conducted using thin specimens. The thickness appropriate for a single-fiber push-out specimen was estimated based on the interfacial shear strength obtained by the bundle push-out tests. Below this thickness, single-fiber push-out tests could be successfully performed.     

Study of nucleation activity and application of a nucleating agent to copolypropylene

The influences of nucleating agent content on crystallization peak temperature, crystallization curve shape, crystallization onset temperature, and crystallinity of a copolypropylene were studied in detail by differential scanning calorimetry. The results showed that crystallization onset temperature and crystallization peak temperature increased 17°C–22°C and 15°C–19°C, respectively, with increasing nucleating agent content. The behavior of the nucleating agent showed excellent efficiency. But the shape of the crystallization curve broadened with increasing nucleating agent content, and the crystallinity came to an extremum when the nucleating agent content was 0.2%. These results generally differed from those for crystallization of i‐PP by a nucleating agent. Modification of copolypropylene was studied by use of a nucleating agent, and the characteristics of the effects of the nucleating agent on copolypropylene were mastered. The results showed that the hardness of a copolypropylene improved observably. So the abrasion resistance of biaxially oriented polypropylene (BOPP) film for cigarette packaging was improved by adopting the modified copolypropylene as the skin‐layer heat‐seal material of BOPP film. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 101:3915–3919, 2006     

回收PET共混物的非等温结晶和熔融行为

采用双螺杆挤出机制备了聚丙烯(PP)/回收聚对苯二甲酸乙二酯(r-PET)、r-PET/马来酸酐接枝PP(PP-g-MAH)和r-PET/甲基丙烯酸缩水甘油酯接枝PP(PP-g-GMA)共混物,并研究了共混物组成、熔融温度与时间以及降温速率对共混物非等温结晶与熔融行为的影响.结果表明,r-PET与PP共混,结晶温度均提高,这与组分间起到异相成核诱导结晶作用有关.r-PET结晶温度随PP-g-MAH用量增加而降低,但受PP-g-GMA用量影响较小;r-PET可提高PP-g-MAH结晶温度,但降低PP-g-GMA结晶温度.熔融温度提高,共混物中PP结晶温度和熔点均降低,r-PET熔融峰形和熔点取决于共混物的熔融温度及界面相互作用.