Internal friction of capsule-free HIPed porous alumina

Porous alumina were sintered by conventional sintering and capsule-free Hot Isostatic Pressing (HIPing), at temperatures between 800 and 1500 °C under pressures 0.1 MPa or 200 MPa for 1 h or 50 h. Young’s modulus and internal friction of samples were measured by resonance method. The results show that Young’s modulus is mainly dominated by porosity of material. Capsule-free HIPed porous materials have slightly higher Young’s modulus than conventionally sintered ones at the same porosity. Internal friction is governed by both porosity and specific surface area. Capsule-free HIPed porous alumina has lower internal friction coefficient than conventionally sintered ones at the similar porosity or at the similar specific surface area. Enhanced surface-self diffusion under high gas pressure reduces internal friction coefficient, and affects internal friction more than Young’s modulus.     

Low Capture Switching Activity Test Generation for Reducing IR-Drop in At-Speed Scan Testing

At-speed scan testing, based on ATPG and ATE, is indispensable to guarantee timing-related test quality in the DSM era. However, at-speed scan testing may incur yield loss due to excessive IR-drop caused by high test (shift & capture) switching activity. This paper discusses the mechanism of circuit malfunction due to IR-drop, and summarizes general approaches to reducing switching activity, by which highlights the problem of current solutions, i.e. only reducing switching activity for one capture while the widely used at-speed scan testing based on the launch-off-capture scheme uses two captures. This paper then proposes a novel X-filling method, called double-capture (DC) X-filling, for generating test vectors with low and balanced capture switching activity for two captures. Applicable to dynamic & static compaction in any ATPG system, DC X-filling can reduce IR-drop, and thus yield loss, without any circuit/clock modification, timing/circuit overhead, fault coverage loss, and additional design effort.

Preliminary spectrum shifter design for intermediate energy nuclear data benchmark experiments with DT neutrons

Integral benchmark experiments with DT neutrons are not always sufficient for nuclear data benchmarking in the MeV region, below 10 MeV. A neutron spectrum shifter, which will be placed between a sample and a DT neutron source, is effective to moderate DT neutrons incident to the sample. In order to estimate effects of the spectrum shifter, the ratio of the contribution of 14 MeV neutrons in the leakage neutron and gamma-ray spectra was calculated with MCNP-4C for an experimental configuration at FNS of JAEA, Japan. The calculations were carried out for a Li₂TiO₃ sample with a Be, D₂O, or ⁷LiD spectrum shifter. It was found out that the Be shifter was superior to others and the Be shifter was effective to decrease the contribution of 14 MeV neutrons especially for secondary gamma-ray spectrum measurements.     

Experimental Evaluation of the Acceptor-States Compensation in Positive-Temperature-Coefficient-Type Barium Titanate

Experimental evidence shows that the acceptor-state levels in Sb-doped positive-temperature-coefficient-type BaTiO₃ are compensated up to a critical acceptor-state density. Using the slope of the natural logarithm of the resistivity with respect to 1/ T , instead of maximum resistivity as a measure for the acceptor-state density, it is possible to estimate this critical value. The value obtained (4.2 × 10¹⁷ m⁻²) is believed to be the first reported estimate based on experimental data. It is in good agreement with the estimate of 6 × 10¹⁷ m⁻² (first reported by Jonker) obtained from the spontaneous polarization of BaTiO₃. This shows that the ferroelectric behavior of BaTiO₃ is indeed a feasible explanation for the low resistivity below the Curie point, as proposed by Jonker.     

模拟流体中真核状态鞭毛运动和纤毛运动的放大推进机构

由于大部分的生物体都具有相对的自发性、功能性和有效率性，模仿生物体动作的机械研究在工程领域是非常重要的。根据这个观点，我们研究了一种基于水中微生物动作的微型推进机构。     

Microfabrication of polytetrafluoroethylene using SR direct etching

Polytetrafluoroethylene (PTFE) is a very attractive material for various fields because of its chemical resistance, insulation properties, and hydrophobic properties. However, it is difficult to fabricate PTFE microstructures with conventional techniques such as semiconductor processes or micromachining. We have succeeded in the fabrication of high‐aspect‐ratio microfluidics parts from PTFE by direct in‐vacuum photo‐etching utilizing synchrotron radiation (SR) at energy levels from 2 to 12 keV. This paper presents an analysis of the mechanisms of the PTFE microfabrication process and describes newly discovered processing characteristics of PTFE. © 2011 Wiley Periodicals, Inc. Electr Eng Jpn, 178(4): 49–54, 2012; Published online in Wiley Online Library ( wileyonlinelibrary.com ). DOI 10.1002/eej.21152     

Closed-form forward kinematics solutions of a 4-DOF parallel robot

It is well known that the forward kinematics of parallel robots is a very difficult problem. Closed-form forward kinematics solutions have been reported only to a few special classes of parallel robots. This paper presents closed-form forward kinematics solutions of a 4-DOF parallel robot H4. A 16th order polynomial in a single variable is derived to solve the forward kinematics of the H4. The 16 roots of the polynomial lead to at most 16 different forward kinematics solutions. A numerical verification is also presented.     

Stress disturbance due to broken fibres in metal matrix composites with non-uniform fibre spacing

Premature fracture of weaker fibres causes stress disturbances in composites. These disturbances are affected by non-uniformity of fibre spacing. In order to evaluate quantitatively how the disturbances in metal matrix composites are affected by the extent of non-uniformity of fibre spacing, a method of calculation is presented on the basis of two-dimensional shear lag analysis. Static tensile stress concentrations in the intact fibres to broken fibres, tensile stress distribution along the fibre axis in the broken and intact fibres and shear stresses between broken and intact fibres were calculated by the method presented, using some examples. It is shown quantitatively that the spacing between broken and intact fibres and that between intact and next fibres has a significant influence on tensile stress concentrations in intact fibres and also on the shear stresses between broken and intact fibres: the narrower the former spacing and the wider the latter spacing, the higher become both tensile and shear stress concentrations. This tendency is enhanced when the number of broken fibres is large and when the strain hardening of the matrix is high.