承受业界强度的模拟器件

几十年的工艺开发大多着眼于提高逻辑电路的密度与速度。最小门尺寸已经从微米级缩小到100nm以下。然而，我们周围的世界并没有同步缩小，所以，对许多应用来说，信号、噪声和非周期事件仍与过去一样大或者更大。作为I／O设计师该怎么办?     

Process demands of rejection mechanisms of recognition memory.

A surge of research has been conducted to examine memory editing mechanisms that help distinguish accurate from inaccurate memories. In the present experiment, the authors examined the ability of participants to use novelty detection, recollection rejection, and plausibility judgments to reject lures presented on a recognition memory test. Participants studied a list of word pairs that were arranged in a category relationship (both words from the same category) or an unrelated relationship (both words from different categories) under full or divided attention. At test, participants were given a yes/no recognition test in which they were to respond after seeing the test items for 400 ms or 2,800 ms. Some of the test items were rearranged word pairs that were consistent with the study relationship, whereas others were inconsistent with the study relationship. The results demonstrate that the participants required full attention at study to use novelty detection, recollection rejection, and plausibility judgments to reject lures. Moreover, the results indicate that a long response deadline at test was needed for participants to use both recollection rejection and plausibility judgments to reject lures. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Investigation of phase behavior during melt processing of novel inorganic‐organic polymer hybrid material

The phase behavior of novel, binary organic‐inorganic hybrids consisting of an ultra‐low T_g tin‐based phosphate glass (Pglass) and polystyrene (PS) was investigated. Dynamic mechanical analysis (DMA) revealed that the glass transition peaks of the PS changed slightly with Pglass volume fraction, leading to a broad peak at the phase inversion point. The phase inversion and degree of phase continuity of the hybrid were studied through solvent extraction, optical/scanning electron microscopy, and dynamic rheology. The Jordhamo and Utracki viscosity ratio models provided reliable estimates of the inversion point. Torque rheometry revealed a trend toward linear additivity within the temperature range 200°C–230°C. Small‐angle neutron scattering experiments gave further evidence of the hybrid phase incompatibility. The results of this study point to a promising new class of blend materials with the potential to present a unique combination of properties impossible to achieve with classical polymer blends. Polym. Eng. Sci. 44:1692–1701, 2004. © 2004 Society of Plastics Engineers.     

反应精馏隔壁塔应用于酯转换过程的研究

提出了一种应用反应精馏隔壁塔把乙酸甲酯废液处理成乙酸正丁酯的新工艺流程,即采用反应精馏隔壁塔替代常规流程中的反应精馏塔及甲醇回收塔。利用Aspen Plus模拟软件对反应精馏隔壁塔及常规流程进行了模拟,考察了进料位置、反应段位置及高度、耦合位置等结构参数对反应精馏隔壁塔的影响,并在保证产品纯度的前提下对反应精馏隔壁塔进行了最优化分析。分析结果显示反应精馏隔壁塔可以节能17.34%,并能有效降低设备投资费用和操作费用。     

Effects of integrated fixed film activated sludge media on activated sludge settling in biological nutrient removal systems

Integrated fixed film activated sludge (IFAS) is an increasingly popular modification of conventional activated sludge, consisting of the addition of solid media to bioreactors to create hybrid attached/suspended growth systems. While the benefits of this technology for improvement of nitrification and other functions are well-demonstrated, little is known about its effects on biomass settleability. These effects were evaluated in parallel, independent wastewater treatment trains, with and without IFAS media, both at the pilot (at two solids residence times) and full scales. While all samples demonstrated good settleability, the Control (non-IFAS) systems consistently demonstrated small but significant (p < 0.05) improvements in settleability relative to the IFAS trains. Differences in biomass densities were identified as likely contributing factors, with Control suspended phase density > IFAS suspended phase density > IFAS attached phase (biofilm) density. Polyphosphate content (as non-soluble phosphorus) was well-correlated with density. This suggested that the attached phases had relatively low densities because of their lack of anaerobic/aerobic cycling and consequent low content of polyphosphate-accumulating organisms, and that differences in enhanced biological phosphorus removal performance between the IFAS and non-IFAS systems were likely related to the observed differences in density and settleability for the suspended phases. Decreases in solids retention times from 8 to 4 days resulted in improved settleability and increased density in all suspended phases, which was related to increased phosphorus content in the biomass, while no significant changes in density and phosphorus content were observed in attached phases.     

Invertebrate mercury bioaccumulation in permanent, seasonal, and flooded rice wetlands within California's Central Valley

We examined methylmercury (MeHg) bioavailability in four of the most predominant wetland habitats in California's Central Valley agricultural region during the spring and summer: white rice, wild rice, permanent wetlands, and shallowly-flooded fallow fields. We sampled MeHg and total mercury (THg) concentrations in two aquatic macroinvertebrate taxa at the inlets, centers, and outlets of four replicated wetland habitats (8 wetlands total) during two time periods bounding the rice growing season and corresponding to flood-up and pre-harvest (96 total samples). In general, THg concentrations (mean ± standard error) in Notonectidae (Notonecta, back swimmers; 1.18 ± 0.08 µg g^− 1 dry weight [dw]) were higher than in Corixidae (Corisella, water boatmen; 0.89 ± 0.06 µg g^− 1 dw, MeHg: 0.74 ± 0.05 µg g^− 1 dw). MeHg concentrations were correlated with THg concentrations in Corixidae (R² = 0.80) and 88% of THg was in the MeHg form. Wetland habitat type had an important influence on THg concentrations in aquatic invertebrates, but this effect depended on the sampling time period and taxa. In particular, THg concentrations in Notonectidae, but not Corixidae, were higher in permanent wetlands than in white rice, wild rice, or shallowly-flooded fallow fields. THg concentrations in Notonectidae were higher at the end of the rice growing season than near the time of flood-up, whereas THg concentrations in Corixidae did not differ between time periods. The effect of wetland habitat type was more prevalent near the end of the rice growing season, when Notonectidae THg concentrations were highest in permanent wetlands. Additionally, invertebrate THg concentrations were higher at water outlets than at inlets of wetlands. Our results indicate that although invertebrate THg concentrations increased from the time of flood-up to draw-down of wetlands, temporarily flooded habitats such as white rice, wild rice, and shallowly-flooded fallow fields did not have higher THg or MeHg concentrations in invertebrates than permanent wetlands.     

Electrospun ultrathin nylon fibers for protective applications

Electrospun nylon 6 fiber mats were deposited on woven 50/50 nylon/cotton fabric with the motive of making them into protective material against submicron‐level aerosol chemical and biological threats. Polymer solution concentration, electrospinning voltage, and deposition areal densities were varied to establish the relationships of processing‐structure‐filtration efficiency of electrospun fiber mats. A high barrier efficiency of greater than 99.5% was achieved on electrospun fiber mats without sacrificing air permeability and pressure drop. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2010     

Life-cycle carbon and cost analysis of energy efficiency measures in new commercial buildings

Energy efficiency in new building construction has become a key target to lower nation-wide energy use. The goals of this paper are to estimate life-cycle energy savings, carbon emission reduction, and cost-effectiveness of energy efficiency measures in new commercial buildings using an integrated design approach, and estimate the implications from a cost on energy-based carbon emissions. A total of 576 energy simulations are run for 12 prototypical buildings in 16 cities, with 3 building designs for each building-location combination. Simulated energy consumption and building cost databases are used to determine the life-cycle cost-effectiveness and carbon emissions of each design. The results show conventional energy efficiency technologies can be used to decrease energy use in new commercial buildings by 20-30% on average and up to over 40% for some building types and locations. These reductions can often be done at negative life-cycle costs because the improved efficiencies allow the installation of smaller, cheaper HVAC equipment. These improvements not only save money and energy, but reduce a building’s carbon footprint by 16% on average. A cost on carbon emissions from energy use increases the return on energy efficiency investments because energy is more expensive, making some cost-ineffective projects economically feasible.     

Coupled mechanical and chemical processes in engineered geothermal reservoirs with dynamic permeability

A model is developed to represent mechanical strain, stress-enhanced dissolution, and shear dilation as innately hysteretic and interlinked processes in rough contacting fractures. The model is incorporated into a numerical simulator designed to examine permeability change and thermal exchange in chemically active and deformable fractured reservoirs. A candidate engineered geothermal reservoir system (EGS) is targeted. The mechanistic model is able to distinguish differences between the evolution of fluid transmission characteristics of (1) small scale, closely spaced fractures, and (2) large-scale, more widely spaced fractures. Alternate realizations of fracture frequency and scale, exhibiting identical initial bulk permeability, lead to significantly different conclusions regarding permeability evolution and thermal drawdown within the reservoir. Reactivation, primarily through mechanical shear, of pervasive, large-scale fractures is shown capable of causing both hydraulic and thermal short circuiting. Small variations in fracture scale impact the balance between the efficiency of thermal transfer and the rate of fluid circulation. Stress-enhanced chemical dissolution, initially at equilibrium within the reservoir, may be reactivated as fractures are forced out of equilibrium during hydraulic fracturing. At the conditions examined (250 °C reservoir with 70 °C injection), however, shear dilation exerts dominant control over changes to permeability. Heterogeneity in permeability, generated from a normal distribution of fracture spacing, impacts thermal breakthrough times at the withdrawal well, as well as withdrawal rates. For the given conditions, spatial variability over ～1 order of magnitude leads to a reduction of ～10% in withdrawal rates compared to a spatially uniform system. Permeability is a strongly dynamic property and at geothermal conditions is influenced by the full suite of THMC interactions.