Antennal fine morphology of the threatened beetle Osmoderma eremita (Coleoptera: Scarabaeidae), revealed by scanning electron microscopy

The aim of this study was to characterize the antennal morphology of Osmoderma eremita, a threatened scarab beetle inhabiting tree hollows. O. eremita males produce a sex pheromone, (R)‐(+)‐γ‐decalactone, responsible mainly for the attraction of females but also other males. Gross and fine morphology of microstructures including sensilla, microsculpture and pores were analyzed using Scanning Electron Microscopy. The antenna of O. eremita showed the typical lamellicorn shape of scarab beetles, with a basal scape, a pedicel, a funicle composed of five antennomeres and a club composed of three lamellae. Six different subtypes of sensilla chaetica (Ch.1 ? 6), Böhm sensilla (Bo), one subtype of sensilla basiconica (Ba.1), two subtypes of sensilla coeloconica (Co.1 ? 2), two subtypes of sensilla placodea (Pl.1 ? 2), pores and peculiar folds were described. The two sexes did not show any significant differences in the occurrence and number of the sensilla placodea, known to be responsible for the pheromone reception. Instead, some sexual differences were found on the occurrence and topology of three different microstructures: (1) one subtype of sensillum chaeticum (Ch.2) occurring on the pedicel only in males; (2) a characteristic pore occurring on the funicle only in males; (3) a peculiar fold occurring on different antennomeres of the funicle in the two sexes, on the fourth in males and on the fifth in females. A comparison between sensilla of O. eremita and those of other Scarabaeoidea is provided. Microsc. Res. Tech. 79:178–191, 2016. © 2016 Wiley Periodicals, Inc.     

A highly efficient receiver for satellite‐based automatic identification system signal detection

An innovative receiver architecture for the satellite‐based automatic identification system has been recently proposed. In this paper, we describe a few modifications that can be introduced on the algorithms for synchronization and detection, which provide an impressive performance improvement. The receiver architecture has been designed for an on‐board implementation, and a prototype has been implemented by the University of Parma and CGS S.p.A. Compagnia Generale per lo Spazio under the European Space Agency project FENICE (Flexible innovative AIS receiver prototype). A few modifications are also here described that could allow a further performance improvement in case of processing moved to ground‐based stations, based on a priori information there available. Copyright © 2014 John Wiley & Sons, Ltd.     

Recent Results in the Interpretation of Interference and Lorentz Images of Vortices in Superconductors

The main ideas and approximations underlying the model developed to interpret the principal features of holographic and Fresnel images of superconducting vortices, or fluxons, are briefly reviewed and applied to the exploitation of new experimental setups, like the standard and coherent Foucault techniques. It is also shown how the model can be implemented to interpret effects due to misalignment and/or distortion of the fluxon cores. Finally, the effect of the finite specimen thickness is also taken into account by resorting to the solution of the Ginzburg-Landau equations found by Clem, and by showing that through it a better agreement can be obtained between theoretical and experimental results.     

Composites Between Alumina and an Ester‐Ether‐Ester Bioresorbable Copolymer

Composites between alumina and the bioresorbable poly(ε‐caprolactone)‐block‐poly(oxyethylene)‐block‐poly(ε‐caprolactone) copolymer were obtained by reacting ε‐caprolactone with preformed poly(ethylene glycol), in the presence of ceramic alumina powder, at 185°C under vacuum. The mechanical properties, tested by compression and flexural strengths and Young's modulus, show that the copolymer interacts poorly with the alumina grains. Both scanning electron and atomic force microscopy show a scarce wettability between alumina and copolymer, as well as the aggregation of alumina micro‐particles into clusters of big size. Both mechanical and morphological tests seem to indicate a stronger interaction between the alumina micro‐particles than between the alumina surface and the reaction mixture during the polymerization, as well as a “compacting effect” by alumina on the forming copolymer. The FT‐IR spectra of the composites show both copolymer and alumina absorption bands. The FT‐IR analysis on the fractions of an extraction with CHCl₃ indicates the presence of traces of poly(ε‐caprolactone), stably linked to alumina. The polymerization of ε‐caprolactone with alumina alone in the same conditions gives poly(ε‐caprolactone), mainly free and in minor part linked to the alumina surface. Two polymerization mechanisms, simultaneously occurring, are proposed. The most relevant result of this work is the lack of chemical inertness of alumina towards ε‐caprolactone, which leads to reconsider also the use of alumina as a biochemically inert material.     

Platelets Contribution to Thrombin Generation in Philadelphia-Negative Myeloproliferative Neoplasms: The “Circulating Wound” Model

Current cytoreductive and antithrombotic strategies in MPNs are mostly based on cell counts and on patient’s demographic and clinical history. Despite the numerous studies conducted on platelet function and on the role of plasma factors, an accurate and reliable method to dynamically quantify the hypercoagulability states of these conditions is not yet part of clinical practice. Starting from our experience, and after having sifted through the literature, we propose an in-depth narrative report on the contribution of the clonal platelets of MPNs—rich in tissue factor (TF)—in promoting a perpetual procoagulant mechanism. The whole process results in an unbalanced generation of thrombin and is self-maintained by Protease Activated Receptors (PARs). We chose to define this model as a “circulating wound”, as it indisputably links the coagulation, inflammation, and fibrotic progression of the disease, in analogy with what happens in some solid tumours. The platelet contribution to thrombin generation results in triggering a vicious circle supported by the PARs/TGF-beta axis. PAR antagonists could therefore be a good option for target therapy, both to contain the risk of vascular events and to slow the progression of the disease towards end-stage forms. Both the new and old strategies, however, will require tools capable of measuring procoagulant or prohaemorrhagic states in a more extensive and dynamic way to favour a less empirical management of MPNs and their potential clinical complications.     

Cellular neural networks as a general massively parallel computational paradigm

In this paper is presented the use of the discrete-time cellular neural network (DTCNN) paradigm to develop algorithms devised for general-purpose massively parallel processing (MPP) systems. This paradigm is defined in discrete N-dimensional spaces (lattices) and is characterized by the locality of the direct information transmission between the space points (cells) and by continuous values of data and parameters; the DTCNN paradigm is thus able to express most of the typical MPP applications. A general version of a DTCNN has been implemented and optimized for three MPP architectures, namely the Connection Machines CM-2 and CM-5 and the Cray T3D. The comparison between the three machine performances with those achieved by a standard SPARC-20 workstation shows that, particularly with large lattices, the speed-up allowed in the computational times is significant and the range of solvable problem sizes is widely extended.     

Monitoring of perfluorinated compounds in edible fish from the Mediterranean Sea

Perfluorooctanoic acid (PFOA) and perfluorooctane sulphonate (PFOS) are environmental contaminants belonging to a chemical group known as perfluorinated compounds (PCFs). The United States Environmental Protection Agency (US EPA) considers both compounds to be carcinogenic. The goal of the present study was to evaluate the contamination levels of PFOS and PFOA in edible fish of the Mediterranean Sea. Twenty six fish muscles, 17 fish livers, five series of cephalopods (each composed of ten specimens) and thirteen series of bivalves (each composed of about 50 specimens) were used for the investigation. A fast sample treatment, followed by an LC–ESI–MS/MS method is described for the identification, and quantification of PFOA and PFOS in fish. The method was in-house-validated through the determination of precision, accuracy, specificity, calibration curve, decision limit (CCα), and detection capability (CCβ). The results showed PFOA and PFOS levels in fishes and molluscs lower than those reported for analogue matrices in different geographic areas. Therefore, our biomonitoring results did not show that the Mediterranean Sea had any particularly alarming pollution by PFCs, although it is located in a semi-closed basin with scarce water change. Nonetheless, a worrying element is that a few fish showed extremely high contamination by PFOA and PFOS. This finding needs further clarification in order to assess whether such unusual contamination is linked to “dot-like” pollutant release, which could explain the anomaly.     

Two- and three-dimensional CFD applied to vertical display cabinets simulation

A commercial CFD code has been employed to simulate the air flow pattern and the temperature distribution in a frozen food vertical display cabinet. At first the choice of solver parameters has been investigated in a 2D modelisation. 3D simulations have been then performed, and the effects of the cabinet length, of the warm air curtain and of longitudinal ambient air movement have been investigated. The results show that, in short cabinets, 3D secondary vortices at the side walls provide the most important mechanism for hot air entrainment. Comparison with experimental results shows that a 2D simulation is totally inadequate for such configurations, while 3D computations predict refrigeration power within engineering accuracy. Furthermore, the computed refrigerating power shows that even low room air velocity, due to its interaction with the end-wall vortices, has a significant impact on cabinet performance.     

Preparation and Characterization of Hyperbranched Polymer/Silica Hybrid Nanocoatings by Dual‐Curing Process

Summary: Organic‐inorganic nanocomposite hybrid coatings were prepared through a dual‐cure process involving cationic photopolymerization of a hyperbranched epoxy functionalized resin and subsequent condensation of an alkoxysilane inorganic precursor. All the formulations investigated gave rise to photocured films characterized by high gel content values. An increase in glass transition temperature and an increase in storage modulus above T_g in the rubbery plateau is observed with increasing TEOS content in the photocurable formulation. The important role of GPTS on reducing the inorganic domain size and avoiding macroscopic phase separation was demonstrated by TEM analyses.

TEM obtained for one of the cured films in the presence of GPTS.     

Cost and Waste Comparison of Reusable and Disposable Shipping Containers for Cut Flowers

Logistics is a fundamental component of the post‐harvest processes, especially in the floricultural sector where the products have to be marketed in short times after the cutting because of their fragility. In the previous years, new approaches to efficiently manage the logistical function and to reduce costs and environmental impacts have been consolidated. In this paper, the investments for two different containers for flower transportation, one disposable and one reusable, are compared, considering a specific supply chain located in central Italy. All data were provided by stakeholders. These were divided into four groups: purchasing, administration, logistical and disposal costs. For the reusable containers, a reverse logistical system, to collect the return components, was hypothesised by using the network analysis tool of the geographic information system (GIS). Results show that the use of a reusable system, which assures a production with less waste and less environmental pressures, is also economically advantageous. Reusable containers involve an initial investment but became cheaper from the second year of the investment and also remained convenient, considering all the costs related to the return collection of the items. Reusable system permits a financial advantage of approximately 140 k€ in total and 21 k€ for each year, considering all the nine years of analysis. Logistics is responsible of the great contribution of total cost in both the reusable and the disposable container (88% and 76%), probably because of the high fragmentation in the delivery service to sale points. Reverse logistics represents the 17% of the reusable container total costs. Copyright © 2011 John Wiley & Sons, Ltd.