A single-grain approach applied to the modeling of recrystallization kinetics for cold-rolled single-phase metals

A comprehensive model for the recrystallization kinetics is proposed which incorporates both microstructure and the textural components in the deformed state. The model is based on the single-grain approach proposed previously. The influence of the as-deformed grain orientation, which affects the stored energy via subgrain size and sub-boundary misorientation, is taken into account. The effects of the deformed grain geometry, the nucleation-site density, and the initial grain size prior to deformation on the recrystallization kinetics are assessed. The model is applied to the recrystallization kinetics of a cold-rolled AA1050 alloy.     

自动控制在选矿厂生产中的应用

详细介绍了自动控制在包钢选矿厂生产中的应用情况     

等离子体浸没离子注入和沉积技术制备TiN薄膜研究

利用多功能等离子体浸没离子注入设备 ,采用等离子体浸没离子注入和沉积技术在Ti合金表面制备具有优异力学性能的TiN薄膜。研究了真空室中氮气存在状态及氮气压力对薄膜性能的影响 :当氮以中性气体存在于真空室中 ,薄膜的生长主要受热力学因素控制 ,沿着低自由能的密排面 (低指数面 )TiN(1 1 1 )择优生长 ;当氮以等离子体状态存在于真空室中 ,薄膜沿着高指数面TiN(2 2 0 )择优生长 ,具有高硬度、耐磨性好的优点 ,并且随着N分压的提高 ,薄膜耐磨性提高     

提高中碳锰铁精炼电炉炉龄的实践

通过对精炼电炉炉体改造和出铁口材质、砖型的更新，解决了在中碳锰铁生产过程中炉眼易损问题，提高了炉龄，降低了生产成本。     

自蔓延高温合成TiNi多孔体合金

为了开发新型的生体材料，本文对自蔓延高温合成TiNi多孔体合金——人造骨材料进行了研究。以单质钛粉和镍粉作原料，在氩气保护条件下，采用预热点燃模式和热爆模式制得了不同形态的多孔TiNi形状记忆合金。采用SEM和XRD分析了样品的孔洞特征和相组成，测试了其力学性能，并研究了合成条件参数与样品表面形貌和孔隙状态之间的关系。结果表明，用SHS法制备TiNi多孔体合金是可行的。     

唐钢ER70S-6焊丝钢的生产工艺研究及质量分析

介绍了唐钢ER70S-6焊丝钢的特点，对盘条质量进行了分析。对该钢化学成分、冶炼和轧制工艺进行了优化研究，使其综合性能明显改善。     

主电机轴瓦异常情况分析解决办法

介绍南钢中板厂四辊轧机主电机轴瓦一种非典型故障现象，原因分析及解决办法，提出了对类似问题个人见解。     

同沉积断裂带砂砾岩隐蔽油藏研究——以东营凹陷胜北断裂带为例

以构造层序、层序地层分析和基准面分析原理为手段,利用高分辨率地震剖面、测井、岩相等资料,重点研究了东营凹陷胜北断裂带深断陷型湖盆层序中的低位体系域砂体沉积特征、发育规律及其石油地质意义.研究表明,沙三期胜北断裂带的活动形成了断裂坡折带,该坡折带控制沙三段层序低位体系域冲积扇、扇三角洲、浊积扇和小型三角洲等砂体的发育及时空展布.断裂坡折带控制的低位体系域砂体位于层序底部、最大湖泛面之下,成藏条件优良,是隐蔽油气藏勘探的主要方向.      

VLSI architectural design tradeoffs for sliding-window log-MAP decoders

Turbo codes have received tremendous attention and have commenced their practical applications due to their excellent error-correcting capability. Investigation of efficient iterative decoder realizations is of particular interest because the underlying soft-input soft-output decoding algorithms usually lead to highly complicated implementation. This paper describes the architectural design and analysis of sliding-window (SW) Log-MAP decoders in terms of a set of predetermined parameters. The derived mathematical representations can be applied to construct a variety of VLSI architectures for different applications. Based on our development, a SW-Log-MAP decoder complying with the specification of third-generation mobile radio systems is realized to demonstrate the performance tradeoffs among latency, average decoding rate, area/computation complexity, and memory power consumption. This paper thus provides useful and general information on practical implementation of SW-Log-MAP decoders.     

基于非锐化掩模的实时自适应图像增强算法

针对传统的非锐化掩模算法的局限性,依据图像中各像素点及以其为中心的若干相邻像素点的均方差值,提出了自适应图像增强算法的原理,并分析其硬件实现方法,然后给出了该算法与其它算法应用于图像增强的对比结果,最后在FPGA（field programmable gate array）实验板上进行验证.实验结果表明,此算法有效的增强图像的细节区域,防止图像边缘区域出现过冲现象,抑制图像平坦区域的噪声放大.因此,该算法取得了良好的视觉效果,硬件实现简单,适合于实时条件下图像的增强.