Emulation of complex open quantum systems using superconducting qubits

With quantum computers being out of reach for now, quantum simulators are alternative devices for efficient and accurate simulation of problems that are challenging to tackle using conventional computers. Quantum simulators are classified into analog and digital, with the possibility of constructing “hybrid” simulators by combining both techniques. Here we focus on analog quantum simulators of open quantum systems and address the limit that they can beat classical computers. In particular, as an example, we discuss simulation of the chlorosome light-harvesting antenna from green sulfur bacteria with over 250 phonon modes coupled to each electronic state. Furthermore, we propose physical setups that can be used to reproduce the quantum dynamics of a standard and multiple-mode Holstein model. The proposed scheme is based on currently available technology of superconducting circuits consist of flux qubits and quantum oscillators.     

A method for evaluating fault coverage using simulated fault injection for digitalized systems in nuclear power plants

The fault coverage for digital system in nuclear power plants is evaluated using a simulated fault injection method. Digital systems have numerous advantages, such as hardware elements share and hardware replication of the needed number of independent channels. However, the application of digital systems to safety-critical systems in nuclear power plants has been limited due to reliability concerns. In the reliability issues, fault coverage is one of the most important factors. In this study, we propose an evaluation method of the fault coverage for safety-critical digital systems in nuclear power plants. The system under assessment is a local coincidence logic processor for a digital plant protection system at Ulchin nuclear power plant units 5 and 6. The assessed system is simplified and then a simulated fault injection method is applied to evaluate the fault coverage of two fault detection mechanisms. From the simulated fault injection experiment, the fault detection coverage of the watchdog timer is 44.2% and that of the read only memory (ROM) checksum is 50.5%. Our experiments show that the fault coverage of a safety-critical digital system is effectively quantified using the simulated fault injection method.     

Emission Control of NO and SO2 for the High-Temperature and Low O2 Concentration Combustion of Coke by Urea and NH4HCO3

Urea and NH4HCO3 were used to control the emission of NO and SO2 from the combustion of coke at high-temperature and low oxygen concentration. Urea and NH4HCO3 could control NO emission only under 1100°C. Their effects disappeared above 1100°C even though the increase of urea and NH4HCO3 content from 10?to?50?wt?%. However, they showed good desulfurization effect on the emission of SO2 at all combustion temperatures and their effects showed remarkable results even at 1500°C. Only 10?wt?% of urea or NH4HCO3 could control the emission of SO2 effectively at 1400 and 1500°C. This effect was caused by ?NH and ?NH2 from the thermal decomposition of reducing agents at high temperature. Low O2 concentration showed little effect on the removal of SO2. Ammonia slip from the thermal decomposition of reducing chemical was not a considerable level.     

Development of the critical film thickness correlation for an advanced annular film mechanistic dryout model applicable to MARS code

It is generally assumed in the mechanistic film dryout model that the critical heat flux (CHF) arises when liquid film calculated from evaporation, droplet entrainment and deposition gets dryout. The dryout of film is usually assumed when film thickness becomes zero. However, it was indicated that the complete dryout assumption can estimate CHF well for uniform heating case but cannot simulate accurately for non-uniform heating case. The critical film thickness concept may be an appropriate approach physically because there is a possibility of instantaneous disappearance of liquid film when it gets very thin. Therefore, a critical dryout film thickness correlation was developed to properly model dryout phenomenon together with MARS code based on experimental data. The modified version of MARS implementing a newly developed critical dryout film thickness correlation was assessed using various dryout data including those of non-uniform heating case and flow reduction transient test. The prediction results showed improved agreement with the experimental data.     

Robust stability analysis and design method for the fuzzy feedbacklinearization regulator

A robust stability analysis and design method for a fuzzy feedback linearization regulator is presented. The well-known Takagi-Sugeno fuzzy model is used as the nonlinear plant model. Uncertainties and disturbance are assumed to be included in the model structure with known bounds. For these structured uncertainties, stability robustness of the closed system is analyzed in both input-output sense and Lyapunov sense. The robust stability conditions are proposed using multivariable circle criterion and the relationship between input-output stability and Lyapunov stability. Also, based on the stability analysis, a systematic design procedure for the fuzzy feedback linearization regulator is provided. The effectiveness of the proposed analysis and design method is illustrated by a simple example     

Evolution of textures and microstructures in IF-steel sheets during continuous confined strip shearing and subsequent recrystallization annealing

Interstitial free (IF) steel sheets were deformed by continuous confined strip shearing (CCSS) based on the equal channel angular pressing (ECAP). The samples were deformed by CCSS up to three passages and subsequently recrystallized at 700°C for 1 h. The strain history of IF steel sheets in the CCSS die-channel was tackled by finite element method (FEM) simulations. The deformation by CCSS led to the shear deformation and consequently the formation of shear texture components. With increasing number of CCSS passages, the intensity of the deformation texture was hardly increased. The recrystallization texture resembled the deformation texture. The orientation stability was discussed by mean of Taylor deformation model and the formation of recrystallization textures was discussed by occurrence of the discontinuous recrystallization. Observations by transmission electron microscopy (TEM) and electron backscattered diffraction (EBSD) revealed the formation of ultra-fine grains in IF sheets deformed by CCSS.     

Combined extended and superimposed finite element method for cracks

A combination of the extended finite element method (XFEM) and the mesh superposition method (s‐version FEM) for modelling of stationary and growing cracks is presented. The near‐tip field is modelled by superimposed quarter point elements on an overlaid mesh and the rest of the discontinuity is implicitly described by a step function on partition of unity. The two displacement fields are matched through a transition region. The method can robustly deal with stationary crack and crack growth. It simplifies the numerical integration of the weak form in the Galerkin method as compared to the s‐version FEM. Numerical experiments are provided to demonstrate the effectiveness and robustness of the proposed method. Copyright © 2004 John Wiley & Sons, Ltd.     

Low-velocity impact analysis of composite laminates using linearized contact law

Usually many researchers have used the modified Hertzian contact law or experimental static indentation law to analyze impact response of composite laminates subjected to low-velocity impact. In this study, physical meaning of the analytical method using the laws was investigated and the difference between the analytical results obtained using the two laws was also investigated. Furthermore parametric study on contact coefficient and exponent of the contact law was performed. Finally it could be shown that linearized contact law could be well applied to the low-velocity impact analysis of composite laminates. If this concept is used, any general-purpose finite element method software can be used to solve impact problem without direct developing any FEM code by each researcher. In this paper, some analytical results analyzed using a general-purpose commercial FEM software were also presented.     

Development of a lane departure monitoring and control system

The lane departure avoidance systems have been considered promising to assist human drivers in AVCS (Advanced Vehicle Control System). In this paper, a lane departure monitoring and control system is developed and evaluated in the hardware-in-the-loop simulations. This system consists of lane sensing, lane departure monitoring and active steering control subsystems. The road image is obtained based on a vision sensor and the lane parameters are estimated using image processing and Kalman Filter technique. The active steering controller for avoiding the lane departure is designed based on the lane departure metric. The proposed lane departure avoidance system is realized in a steering HILS (hardware-in-the-loop simulation) tool and its performance is evaluated with a driver in the loop.     

Field Evaluation of the Bacterial Volatile Derivative 3-Pentanol in Priming for Induced Resistance in Pepper

Plants are defended from attack by emission of volatile organic compounds (VOCs) that can act directly against pathogens and herbivores or indirectly by recruiting natural enemies of herbivores. However, microbial VOC have been less investigated as potential triggers of plant systemic defense responses against pathogens in the field. Bacillus amyloliquefaciens strain IN937a, a plant growth-promoting rhizobacterium that colonizes plant tissues, stimulates induced systemic resistance (ISR) via its emission of VOCs. We investigated the ISR capacity of VOCs and derivatives collected from strain IN937a against bacterial spot disease caused by Xanthomonas axonopodis pv. vesicatoria in pepper. Of 15 bacterial VOCs and their derivatives, 3-pentanol, which is a C8 amyl alcohol reported to be a component of sex pheromones in insects, was selected for further investigation. Pathogens were infiltrated into pepper leaves 10, 20, 30, and 40 days after treatment and transplantation to the field. Disease severity was assessed 7 days after transplantation. Treatment with 3-pentanol significantly reduced disease severity caused by X. axonopodis and naturally occurring Cucumber mosaic virus in field trials over 2 years. We used quantitative real-time polymerase chain analysis to examine Pathogenesis-Related genes associated with salicylic acid (SA), jasmonic acid (JA), and ethylene defense signaling. The expression of Capsicum annuum Pathogenesis-Related protein 1 (CaPR1), CaPR2, and Ca protease inhibitor2 (CaPIN2) increased in field-grown pepper plants treated with 3-pentanol. Taken together, our results show that 3-pentanol triggers induced resistance by priming SA and JA signaling in pepper under field conditions.