添加稀土氧化物助剂的CeO2-ZrO2固溶体的储氧性及热稳定性研究

大多数工业催化剂都是在稳定的操作条件下进行的,然而汽车尾气净化催化剂却被暴露在大气中,使用条件经常变化,尤其是空燃比(A/F)的变化,直接影响了对氧敏感的三效催化剂的氧化和还原性能[1].CeO2则是一种具有储氧/释氧能力的催化材料,它作为助剂加入三效催化剂中,可在贫况下储存氧(以Ce4+存在)利于NOx的还原,在富况下释放氧(以Ce3+存在),利于HC、CO的氧化,从而提高了催化剂的活性.然而,CeO2 的储氧性通常局限在表面上,当温度超过400℃以上时,其比表面积降低从而引起储氧性能急剧下降,直接影响催化剂的性能和寿命.     

Investigation of Partial Oxidation of Methane to Syngas on Rh/SiO2-Using 1H-NMR

In our previous work, POM has been investigated by the pulse reaction with CH₄ and CH₄/O₂ respectively, on Rh/SiO₂ catalyst. Kinetic isotopic effect was also studied by using CD₄ and CD₄/O₂. The results suggest that POM may proceed most possibly via a mechanism of surface carbon species reacting with surface oxygen. In the present work, ¹H MAS NMR was utilized to investigate the POM mechanism in aiming of presenting additional evidence.     

Preparation of Spinel LiMn2O4 by a Spray-drying Method

Spinel LiMn₂O₄ has already become an attractive cathode material for rechargeable lithium-ion battery. Compared with other layered compounds LiCoO₂ and LiNiO₂,LiMn₂O₄ offers several advantages:inexpensive, nontoxic, abundant and easy to prepare. These characteristics induce many researchers to study it to make it commercialized.     

The Diffusion Coefficient of Lithium Ions into Highly Oriented Pyrolytic Graphite

The diffusion coefficient of lithium in graphite is an important parameter for the use of graphite because it relates to the ability of charge and discharge rate of lithium battery. It remains a problem that there are often obvious differences among the diffusion coefficients obtained using different methods, even in one paper^[1,2]. This difference may attribute to the complicate properties of intercalation process, as well as some uncertain parameters of the porous structure electrode. In order to measure the diffusion coefficient of lithium in carbon more precisely, a well crystallized material Highly Oriented Pyrolytic Graphite (HOPG) was used as the material of working electrode in this study.     

Novel Synthesis of Nanometer Crystal-sized Zeolite NaY by Adding Lanthanum-containing Compounds

Nanometer-sized zeolite possesses many distinct advantages^[1,2] comparing with its commercially available micrometer-sized counterpart^[3], and receives much attention in recent years. In this work, a novel synthesis of nanometer-sized zeolite NaY is presented.     

超微NaY分子筛的合成(Ⅰ)──添加轻稀土离子的影响

导向剂的陈化时间和反应胶的晶化温度可以影响NaY分子筛的晶化行为.随导向剂陈化时间的增加,NaY分子筛的晶化速度加快,晶粒尺寸减小;随晶化温度的升高,NaY分子筛的晶化速度加快,但晶粒尺寸增加.而向合成体系中添加轻稀土离子(Ln³⁺)对NaY分子筛的晶化行为影响更为明显.与未添加稀土离子时相比较,在一定的稀土离子添加量范围内[n(Ln³⁺)/n(Al³⁺)<0.2],NaY分子筛的晶化速度明显加快而晶粒尺寸显著减小,同时所合成出的NaY分子筛的n(SiO₂)/n(Al₂O₃)比也有较大的提高.添加稀土离子使合成体系中形成异晶晶种的Ln(OH)₃微晶,从而进一步引发NaY分子筛的成核.     

聚茜素红膜修饰电极控制电位扫描法分别测定多巴胺和抗坏血酸

研究了聚茜素红膜修饰电极(PARE)的制备及其对多巴胺(DA)和抗坏血酸(AA)的电催化性能,结果表明,在PARE上DA和AA具有不同的循环伏安行为,前者表现为一个准可逆过程,后者则为不可逆过程,并且二者的氧化峰电位分开近200mV.因此可通过控制不同的电位范围进行分步扫描,实现了对同一体系中DA和AA的分别测定,DA的还原峰电流和AA的氧化峰电流分别在8.0×10^-6～4.0×10^-3mol/L和4.0×10^-5～2.0×10^-2mol/L范围内与各自的浓度呈线性关系;检测限分别为8.0×10^-7mol/L和1.0×10^-5mol/L.同时与导数伏安法一步测定进行比较,结果令人满意.     

基于光场成像原理和混沌系统的多图像加密方法

针对现有光学加密方法对加密系统要求高、受器件性能限制、加密效率低、解密图像易失真的局限性,提出一种基于光场成像原理和混沌系统的多图像加密方法.该方法利用混沌系统随机生成光场成像系统的个数与系统参数,并在计算机中构造出相应的多个光场成像系统;将多幅待加密图像拼接后置于光场成像系统中依次计算得到光场图像,通过提取光场图像的多幅子孔径图像并进行拼接,实现多幅图像的快速加密.解密过程为加密过程的逆过程.该方法将计算成像的方式引入加密过程,使加密不受硬件条件的限制,易于实现.实验结果表明,提出的算法密钥复杂度低,易于传输;对噪声有较好的鲁棒性,密钥空间大,密钥敏感度高,安全性好;加密效率高,解密图像无损失.在需要大量图像进行安全传输的领域具有广泛的应用前景.     

Cu(I)-Ce(IV)-Y吸附剂的制备及其脱硫性能研究

采用液相离子交换Cu、Ce离子制备了Cu(I)-Y、Ce(IV)-Y和Cu(I)-Ce(IV)-Y吸附剂,利用XRD、BET等技术对吸附剂进行了表征。通过静态实验考察了制备条件对Cu(I)-Ce(IV)-Y吸附剂脱硫性能的影响,通过固定床实验研究了吸附剂的穿透硫容,同时,在含噻吩与苯并噻吩的正辛烷模拟油中,分别加入甲苯、环己烯、吡啶配成新的模拟油,探究了吸附剂的脱硫选择性。结果表明,离子交换时间48 h,焙烧温度550℃,Cu/Ce物质的量比1∶1下制备的Cu(I)-Ce(IV)-Y吸附剂具有适宜的脱硫活性。在含甲苯、环己烯模拟油中,Cu(I)-Ce(IV)-Y吸附剂具有最好的脱硫性能,相同浓度的甲苯、环己烯和吡啶对各吸附剂脱硫性能的影响顺序为吡啶环己烯甲苯。引入Cu+可改善吸附剂的脱硫活性,引入Ce4+可改善吸附剂对硫化物的选择性,Cu+和Ce4+的协同作用使Cu(I)-Ce(IV)-Y兼具有高的硫容和抗芳烃、烯烃能力。     

丙泊酚微乳注射液血浆蛋白结合率的测定

采用Beagel犬血浆平衡透析法,高效液相色谱法测定丙泊酚微乳注射液与Beagel犬血浆蛋白结合率。色谱柱:Agilent C18柱(5μm,4.6 mm×150 mm);流动相:0.01 mol/L乙酸铵(pH 7.0):乙腈=20:80(V/V);紫外检测波长:215 nm。丙泊酚在5～600 ng/mL范围内线性关系良好。丙泊酚微乳注射液在质量浓度为50、400、1000 ng/mL时与血浆蛋白结合率分别为(96.97±0.52)%、(97.73±0.76)%、(97.74±0.58)%。HPLC法能较好的应用于丙泊酚微乳注射液血浆蛋白结合率的测定,丙泊酚微乳注射液具有较高强度的血浆蛋白结合率。