Low-temperature destruction of carbon tetrachloride over lanthanide oxide-based catalysts: from destructive adsorption to a catalytic reaction cycle

The catalytic destruction of carbon tetrachloride in the presence of steam, CCl(4) + 2 H(2)O-->4 HCl + CO(2), was investigated at 200-350 degrees C over a series of lanthanide (La, Ce, Pr and Nd) and alkaline-earth metal (Mg, Ca, Sr and Ba) oxide-based catalysts with kinetic experiments, Raman spectroscopy, X-ray photoelectron spectroscopy, IR spectroscopy, X-ray diffraction, and DFT calculations. This new catalytic reaction was achieved by combining destructive adsorption of CCl(4) on a basic oxide surface and concurrent dechlorination of the resulting partially chlorinated solid by steam. The combination of the two noncatalytic reactions into a catalytic cycle provided a rare opportunity in heterogeneous catalysis for studying the nature and extent of surface participation in the overall reaction chemistry. The reaction is proposed to proceed over a terminal lattice oxygen site with stepwise donation of chlorine atoms from the hydrocarbon to the surface and formation of the gas-phase intermediate COCl(2), which is readily readsorbed at the catalyst surface to form CO(2). In a second step, the active catalyst surface is regenerated by steam with formation of gas-phase HCl. Depending on the reaction conditions, the catalytic material was found to transform dynamically from the metal oxide state to the metal oxide chloride or metal chloride state due to the bulk diffusion of oxygen and chlorine atoms. A catalyst obtained from a 10 wt % La(2)O(3)/Al(2)O(3) precursor exhibited the highest destruction rate: 0.289 g CCl(4) h(-1) g(-1) catalyst at 350 degrees C, which is higher than that of any other reported catalyst system.     

Synthesis of new derivatives of 4-amino-2,4-dihydro-1,2,4-triazol-3-one as potential antibacterial agents

Thirty new 2-substituted-4-amino-5-alkyl or aryl-2,4-dihydro-1,2,4-triazol-3-ones and ten 2-substituted-5-alkyl or aryl-4-(5-nitro-2-furfurylidene)amino-2,4-dihydro-1,2,4-triazol-3-ones were synthesized and characterised by their sharp melting points, elemental analysis, ir and ¹H nmr spectra. These new derivatives of 5-nitro-2-furaldehyde were screened for their antibacterial activities. Most of the compounds showed good activity against one test organism, Staphylococcus aureus. For a few compounds, C.M.I. ranged from 4 to 8 μg/ml (higher results than nitrofurantoin).     

Linear dependence in basis-set calculations for extended systems

The problem of linear dependence in basis-set calculations for extended systems is discussed. We show that the problem is intrinsic in three-dimensionally extended systems, but is not as serious in systems with extension in fewer dimensions. The possibility of choosing suitable basis sets that avoid linear dependence is discussed. It is shown that for systems extended in three dimensions in which the orbitals near the Fermi-level are well described by plane waves a mixed atomicorbital/plane-wave (AO –PW ) basis set with tight orbitals to describe the cores avoids the problem in the most efficient way. Numerical experiments with 1s Slater-type orbitals and plane waves on a simple cubic lattice are presented for illustration. © 1992 John Wiley & Sons, Inc.     

Osmium(II)-Phthalocyanine: Darstellung und Eigenschaften von Di(acido)phthalocyaninatoosmaten(II)

Osmium(II) Phthalocyanines: Preparation and Properties of Di(acido)phthalocyaninatoosmates(II) “H[Os(X)₂Pc^2?]” (X = Br, Cl) reacts in basic medium or in the melt with (ⁿBu₄N)X forming less stable, diamagnetic, darkgreen (ⁿBu₄N)₂[Os(X)₂Pc^2?]. Similar dicyano and diimidazolido(Im) complexes are formed by the reaction of “H[Os(Cl)₂Pc^2?]” with excess ligand in the presence of [BH₄]^?. The cyclic voltammograms show up to three quasireversible redoxprocesses: E_1/2(I) = 0.13 V (X = CN), ?0.03 V (Im), ?0.13 V (Br) resp. ?0.18 V (Cl) is metal directed (Os^II/III), E_1/2(II) = 0.69 V (Cl), 0.71 V (Br), 0.83 V (CN), 1.02 V (Im) is ligand directed (Pc^2?/?) and E_1/2(III) = 1.17 V (Cl) resp. 1.23 V (Br) is again metal directed (Os^III/IV). Between the typical “B” (～16.2 kK) and “Q” (～29.4 kK), “N regions” (～34.1 kK) up to seven strong “extra bands” of the phthalocyanine dianion (Pc^2?) are observed in the uv-vis spectrum. Within the row CN > Im > Br > Cl, most of the bands are shifted slightly, the “extra bands” considerably more to lower energy in correlation with E_1/2(I). The vibrational spectra are typical for the Pc^2? ligand with D_4h symmetry. M.i.r. bands at 514, 909, 1 173 and 1 331 cm^?1 are specific for hexa-coordinated low spin Os^II phthalocyanines. In the resonance Raman (r.r.) spectra polarized, depolarized or anomalously polarized deformation and stretching vibrations of the Pc^2? ligand will be selectively enhanced, if the excitation frequency coincides with “extra bands”. With excitation at ～19.5 kK the intensity of the symmetrical Os? X stretching vibration at 295 cm^?1 (X = Cl), 252 cm^?1 (X = Im) and 181 cm^?1 (X = Br) is r.r. enhanced, too. The asymmetrical Os? X stretching vibration is observed in the f.i.r. spectrum at 345 cm^?1 (X = CN), 274 cm^?1 (X = Cl), 261 cm^?1 (X = Im) and 200 cm^?1 (X = Br).     

电光高分子材料的最新研究进展

电光高分子材料由于其在光电子信息领域的潜在应用前景已得到了广泛关注和深入研究.本文在简要介绍电光效应及其材料等相关知识的基础上,综述了最近几年来电光高分子材料的研究进展,主要包括生色团的设计与合成,以及掺杂型、侧链型、主链型、交联型、互穿网络型和树枝型等聚合物材料体系的设计与合成.     

Synthesis and conformational evaluation of p-tert-butylthiacalix[4]arene-crowns

Bridging of p-tert-butylthiacalix[4]arene afforded 1,3-dihydroxythiacalix[4]arene-monocrown-5 (3b), 1,2-alternate thiacalix[4]arene-biscrown-4 and -5 (4a,b), and 1,3-alternate thiacalix[4]arene-biscrown-5 and -6 (5a,b), depending on the metal carbonates and oligoethylene glycol ditosylates used. Starting from 1,3-dialkylated thiacalix[4]arenes, the corresponding bridging reaction gave 1,3-alternate, partial-cone, and cone conformers 10-19, depending on the substituents present. Temperature-dependent studies revealed that the conformationally flexible 1,3-dimethoxythiacalix[4]arene-crowns 10a-c exclusively occupy the 1,3-alternate conformation. Demethylation exclusively gave the cone 1,3-dihydroxythiacalix[4]arene-crowns (3a,c), which could not be obtained by direct bridging of thiacalix[4]arene. The different structures were assigned on the basis of several X-ray crystal structures and extensive 2-D (1)H NMR studies.     

Sequential isomerization and ring-closing metathesis: masked styryl and vinyloxyaryl groups for the synthesis of benzo-fused heterocycles

The use of an aryl allyl ether and an arylallyl group as masked vinyl ether and 1-propenylphenyl groups for ring-closing metathesis (RCM) leading to the synthesis of benzo-fused heterocycles was demonstrated by using a ruthenium-mediated isomerization followed by a ruthenium-mediated RCM reaction. This resulted in the syntheses of a variety of products including two substituted benzo[1,4]dioxins, a naphtho[2,3-b][1,4]dioxin, a 2H-chromene and a benzo[b]furan.     

Settling of paraffin crystals in cooled middle distillate fuels

The mechanism of action of additives that control the sedimentation of paraffin crystals after their crystallization in model diesel oil has been studied by means of a new experimental approach. The chemical analysis of the crystals and detailed measurements of the sedimentation phenomenon give new insights into this complex process. Thus, the wax antisettling additives used for preventing wax crystal sedimentation adsorb at the surfaces of wax particles and provide them with enhanced colloidal stability. The settling rate is not related to the size of the crystals or the viscosity of the liquid medium, but to the ability of the additives to prevent the aggregation of wax crystals. The reported methodology makes it possible to investigate the fundamental mechanisms, but also to evaluate structure-activity relationships of the various additives used in the petroleum industry.