氨纶用聚酯二醇的研究

本文研究了聚酯二醇的生产工艺,重点研究了反应温度对生产工艺的影响以及原料已二酸与二元醇的投料比对产品酸值和羟值的影响,催化剂对产品质量的影响,并对产品着色原因进行了探讨。     

淤浆法HDPE产品密度波动原因分析

对淤浆法HDPE装置产品密度波动的现象进行了描述，对波动原因进行了分析，并提出了有效的解决方案，对避免密度波动，提高产品质量具有一定指导作用。     

Ultrasound as a Tool to Synthesize Nano-Sized Silica–Alumina Catalysts with Controlled Mesoporous Distribution by a Novel Sol–Gel Process

A novel sol–gel process is used to synthesize mesoporous silica–alumina catalysts with controlled pore size distribution without using templates or pore-regulating agents. The nitrogen sorption analysis shows that the synthesized materials have high specific surface area in the range 587–692 m²/g and similar mesoporous distribution within 2–11 nm. Ultrasound is applied to prepare precursor silica–alumina sol with narrow particle diameter distribution. By calculation, it is found that ultrasonic treatment is able to provide 22.94 kJ/mol energy, which is just in accordance with the weak bond's bonding energy. Based on the calculation result, it is proposed that the role of ultrasonic treatment followed by acid peptization is to provide energy to break down the weak bonds. After gelation, the regular and close packing of similar-sized sol particles is capable of formation of controlled-sized interstices which are the precursors of mesopores. Solid-state ²⁷Al MAS NMR and TEM are used to characterize the samples' structure and particle morphology. They show that most of the aluminum is located in the tetrahedral position in the present materials. According to TEM results, it is shown that the synthesized materials have spherical particles with size of about 15 nm.     

A study of PtRuO2 catalysts thermally formed on titanium mesh for methanol oxidation

Platinum-based catalysts, for the electro-oxidation of methanol, have been made by thermal decomposition of chloride precursors onto titanium mesh. The catalysed electrodes were successfully operated in acidic methanol electrolytes. Electrochemical characterisation has been carried out using cyclic voltammetry, electrochemical impedance spectroscopy and galvanostatic polarisations. A complete analysis of the electrochemical results showed that the preliminary performance of the catalysed titanium mesh was comparable to that achieved with carbon-supported PtRu catalysts. The catalysts formed on titanium mesh by thermal decomposition also exhibited dimensional stability. Catalysed titanium mesh therefore appears to be a promising alternative to carbon-supported catalysts for certain fuel cell applications.     

A high propylene productivity over B2O3/SiO2@honeycomb cordierite catalyst for oxidative dehydrogenation of propane

Boron-based metal-free catalysts for oxidative dehydrogenation of propane (ODHP) have drawn great attention in both academia and industry due to their impressive activity and olefin selectivity. Herein, the SiO₂ and B₂O₃ sequentially coated honeycomb cordierite catalyst is designed by a two-step wash-coat method with different B₂O₃ loadings (0.1%–10%) and calcination temperatures (600, 700, 800 °C). SiO₂ obtained by TEOS hydrolysis acts as a media layer to bridge the cordierite substrate and boron oxide via abundant SiOH groups. The well-developed straight channels of honeycomb cordierite make it possible to carry out the reactor under high gas hourly space velocity (GHSV) and the thin wash-coated B₂O₃ layer can effectively facilitate the pore diffusion on the catalyst. The prepared B₂O₃/SiO₂@HC monolithic catalyst exhibits good catalytic performance at low boron oxide loading and achieves excellent propylene selectivity (86.0%), olefin selectivity (97.6%, propylene and ethylene) and negligible CO₂ (0.1%) at 16.9% propane conversion under high GHSV of 345,600 ml·(g B₂O₃)⁻¹·h⁻¹, leading to a high propylene space time yield of 15.7 g C₃H₆·(g B₂O₃)⁻¹·h⁻¹ by suppressing the overoxidation. The obtained results strongly indicate that the boron-based monolithic catalyst can be properly fabricated to warrant the high activity and high throughput with its high gas/surface ratio and straight channels.     

A novel preparation method for NiCo2O4 electrodes stacked with hexagonal nanosheets for water electrolysis

In this paper, we describe the preparation of a porous nanosheet-stacked NiCo₂O₄ composite electrode using a novel electrophoretic deposition (EPD) calcination method. The effects of the deposition time and voltage, and of the calcination temperature have been investigated. The microstructure of the deposited films in the electrodes before and after calcination has also been investigated. The electrocatalytic properties of the electrodes have been investigated using cyclic voltammetry and polarization curves. The electrode films produced using this new technique have a porous structure composed of stacked hexagonal NiCo₂O₄ nanosheets. The resulting electrodes exhibit good electrocatalytic properties for water electrolysis.     

Soy protein combined with copper and boron compounds for providing effective wood preservation

Chromated copper arsenate (CCA), an arsenicbased wood preservative, is toxic to human health and the environment. Although CCA is stable in seasoned wood, there are potential dangers during CCA manufacture, lumber treatment, and waste disposal. This research was conducted to study the effectiveness of soy products to replace toxic chromium and arsenic compounds in wood preservative formulations. Three soy product (Arpro 2100, HM 90, and Supro 760) were used as fixative agents in preservative solutions containing anhydrous CuSO₄ and Na₂B₄O₇·10H₂O. The decay resistance of treated wood blocks was measured by a soil-block culture method. Despite the large molecular sizes of copper-protein and copper-boron-protein complexes, southern pine sapwood was treatable with these preservative formulations. Wood samples treated with >6 kg°m⁻³ CuSO₄ and 7.5 kg·m⁻³ soy product, and subsequently leached for 3 d and exposed to the decay fungus Gloeophyllum trabeum (Fr.) Mur., sustained only 0.5% weight loss over 12 wk. Wood samples needed 40 kg·m⁻³ CuSO₄ and 50 kg·m⁻³ soy protein to resist the copper-tolerant decay fungus Postia placenta (Fr.) M. Lars. & Lomb. These results suggest that soy-based wood preservatives can prevent wood products from fungal attack and can replace CCA.     

管道三层结构聚烯烃防腐技术及应用

介绍管道三层结构聚烯烃防腐技术的基本特点和技术要求 ,以及该技术在国内外的应用情况。长输管道对防腐材料的需求量大 ,目前是开发配套的粉末涂料和性能更好的改性聚烯烃树脂的良机。     

钢液对连铸用含碳耐火材料的侵蚀作用研究

采用中频炉的实验室模拟试验(试验条件:钢液温度1600℃,浸入时间30min,气氛分别为空气和真空)和通过对用后耐火材料的显微结构分析,研究了钢液对3种连铸用含碳耐火材料(Al2O3-C、MgO-C和ZrO2-C)的侵蚀作用。结果表明,脱碳层的形成及钢液中夹杂物与脱碳层中耐火氧化物的反应是材料蚀损的主要原因。因此,在含碳耐火材料接触钢液的表面形成致密耐火层,能有效抑制钢液对连铸用含碳耐火材料的侵蚀。     

几种无机阴离子对TiO_2催化活性影响的实验研究

以N掺杂TiO2试剂为催化剂,降解偶氮直接耐酸大红4BS溶液,同时外加4种浓度不同的阴离子溶液,探讨了HCO3-,F-,NO3-,H2PO4-等阴离子对N/TiO2化学试剂催化活性的影响。实验表明,HCO3-,F-,NO3-,H2PO4-等阴离子对N/TiO2化学试剂的催化活性有显著影响。因此,可以通过外加不同的离子来提高或降低N/TiO2的活性。