LTG空调系统侧吹风风压波动的原因及对策

阐述了LTG空调侧吹风风压调节的原理，从工艺、设备、控制、操作等方面分析了侧吹风风压波动的原因，提出了解决侧吹风风压波动的对策。     

Ni-Mo-O催化剂中协同作用对丙烷氧化脱氢的影响

在 Ni-Mo-O体系中 ,加入 Mo O3 能极大地提高丙烷氧化脱氢制丙烯的反应活性。选用固混法、沉淀法、柠檬酸法制备了 Mo O3 过量 1 5 % (摩尔分数 )的α -Ni Mo O4催化剂 ,其中用沉淀法制得催化剂在 5 0 0℃ ,V( C3 H8) /V ( O2 ) /V ( N2 ) =1 0 /1 0 /5 0 ,反应气流量为 70 m L/min的条件下丙烷转化率可达 38.7% ,丙烯选择性达 70 .1 4 %。经 XRD,XPS,TPR表征说明 ,在含有过量 Mo O3 的催化剂中 ,α -Ni Mo O4与 Mo O3 两种晶体之间可产生微小的相互吸引 ;从而发挥协同作用 ,是提高催化剂活性     

Criterion of Magnetic Saturation and Simulation of Nonlinear Magnetization for a Linear Multi-core Pulse Transformer

The linear multi-core pulse transformer is an important primary driving source used in pulsed power apparatus for the production of dense plasma owing to its compact,relatively low-cost and easy-to-handle characteristics.The evaluation of the magnetic saturation of the transformer cores is essential to the transformer design,because the energy transfer efficiency of the transformer will degrade significantly after magnetic saturation.This work propses analytical formulas of the criterion of magnetic saturation for the cores when the transformer driver practical loads.Furthermore,an electric circuit model based on a dependent source treatment for simulating the electric behavior of the cores related to their nonlinear magnetization is developed using the initial magnetization curve of the cores.The numerical simulation with the model is used to evaluate the validity of the criterion.Both the criterion and the model are found to be in agreement with the experimental data.     

车用乙醇汽油调合及储运问题的探讨

简要介绍了车用乙醇汽油的组成、性质 ,阐述了车用乙醇汽油调合及储运设施的工艺设计思想 ,以及车用乙醇汽油储运设施设计中应注意的问题。     

Hysys软件在分析精丙烯硫化物来源中的应用

气体分馏装置原料液化石油气 (LPG)中有机硫化物形态复杂 ,考察分析工业装置精丙烯硫化物含量变化难度大。利用Hysys模拟 ,分析判断LPG中小分子有机硫化物在气体分馏产品的分布并提出了控制措施。考虑操作条件对精丙烯硫含量的影响 ,并对工业装置精丙烯总硫超标原因进行了分析。     

TATB基高聚物粘结炸药低温老化后的结构和热性能研究

将TATB基高聚物粘结炸药在0，－10，－20，－30，－40℃的条件下贮存120天，利用红外光谱测定其分子结构的特征，并 利用真空安定性试验、热失重以及差热分析测定低温贮存前后的热稳定性，结果表明：TATB基高聚物粘结炸药经低温贮存后分子结构没有发生改变，热稳定性较好，说明低温贮存对TATB基高聚物粘结炸药影响不大。     

HART协议物理层设备的测试(上)

本文介绍HART协议物理层设备的测试要求、测试设备、测试方法及测试时的一些特别说明。     

封隔器胶筒接触应力分布有限元计算

利用ANSYS软件对3种封隔器胶筒的接触应力进行了有限元计算，得到了接触应力沿胶筒轴向的分布情况。比较不同结构封隔器胶筒在相同条件下的接触应力分布，可知新型封隔器胶筒在高压下接触应力分布更为均匀合理，具有较好的应用前景。     

臭氧法水处理在空调冷却水系统中的应用

探讨了臭氧法杀菌灭藻，缓蚀，阻垢的机理，认为臭氧法可用于空调冷却水处理，并给出在工程设计中的应用方法。     

REHEATING TEMPERATURE CONTRAST AND MICROSTRUCTURES OF 7075 Al ALLOY CAST BY LIQUIDUS SEMI-CONTINUOUS CASTING

In this study, reheating of liquidus semi-continuous cast billets of 7075 Al alloy was carried out in a resistance furnace, and the temperature contrast of the outer and the center of the reheated billets was investigated, then the reheating microstructures were investigated. Results show that: the difference of temperature between the outer and center is small and the difference of their microstructures are also small. During reheating at 576℃ the spheroidization of grains is significant after 5min and no rosettes are visible after 20min by optical microscopy. Similar observations were madeon materials reheated at 596℃, but the ripening process is faster. The grains growup to 30-60μm, fine enough for thixoforming.