Magnetic probe array with high sensitivity for fluctuating field

A magnetic probe array is constructed to measure precisely the spatial structure of a small fluctuating field included in a strong confinement field that varies with time. To exclude the effect of the confinement field, the magnetic probes consisting of figure-eight-wound coils are prepared. The spatial structure of the fluctuating field is obtained from a Fourier analysis of the probe signal. It is found that the probe array is more sensitive to the fluctuating field with a high mode number than that with a low mode number. An experimental demonstration of the present method is attempted using a field-reversed configuration plasma, where the fluctuating field with 0.1% of the confinement field is successfully detected.     

An FPGA implementation of real-time K-means clustering for color images

K-means clustering is a very popular clustering technique, which is used in numerous applications. In the k-means clustering algorithm, each point in the dataset is assigned to the nearest cluster by calculating the distances from each point to the cluster centers. The computation of these distances is a very time-consuming task, particularly for large dataset and large number of clusters. In order to achieve high performance, we need to reduce the number of the distance calculations for each point efficiently. In this paper, we describe an FPGA implementation of k-means clustering for color images based on the filtering algorithm. In our implementation, when calculating the distances for each point, clusters which are apparently not closer to the point than other clusters are filtered out using kd-trees which are dynamically generated on the FPGA in each iteration of k-means clustering. The performance of our system for 512 × 512 and 640 × 480  pixel images (24-bit full color RGB) is more than 30 fps, and 20–30 fps for 756 × 512 pixel images in average when dividing to 256 clusters.

Origin of coercivity changes during the oxidation of Fe3O4to γ-Fe2O3

Oxidation kinetics and x-ray diffraction of the intermediate products have been investigated for several kinds of Fe3O4powders during the oxidation to γFe2O3. From these results, a two-components-hypothesis as an intermediate state of the Fe3O4- γFe2O3system is proposed, instead of a homogenious solid solution which has been widely recognized. The effect of the changes in particle size caused by the two phases oxidation products on the variations of magnetic coercivity was emphasised.     

Superfluid density in the presence of persistent current in superfluid4He

The superfluid density _s in the presence of persistent current(v _n –v _s 0) is investigated using the Doppler-shifted fourth-sound technique. In the vortex-free Landau state, _s remains constant within our experimental resolution of two parts in 10 ⁵ . This is not inconsistent with a theoretical prediction by Khalatnikov. Where vortices are present outside the Landau region, a fractional change in _s becomes as large as 1.2%, depending on rotation velocity and temperature, and shows a relatively complex hysteresis behavior.This research is supported by NSF and ONR.     

Spin Injection Processes in ZnSe-Based Double Quantum Dots of Diluted Magnetic Semiconductors

Spin injection processes in the double quantum dots of ZnSe-based diluted magnetic semiconductors are discussed. Double quantum dots are fabricated from ZnSe-based double quantum wells by electron beam lithography and wet etching. In these samples, the photo-excited carriers in the magnetic dots are injected into the non-magnetic dots. The circular polarization degrees of photoluminescence from the non-magnetic dots are measured by micro-photoluminescence measurement system under the magnetic field up to 5 T. The maximum spin polarization degrees of injected carriers determined from our experiment are 10% for double quantum wells and 15% for double quantum dots. The spin injection efficiency was estimated both from the observed circular polarization degree and the diffusion length of carriers. We concluded that the spin injection efficiency is increased in the double quantum dots.     

Development of smart composite structures with small-diameter fiber Bragg grating sensors for damage detection: Quantitative evaluation of delamination length in CFRP laminates using Lamb wave sensing

The authors and Hitachi Cable, Ltd. have recently developed small-diameter optical fiber and its fiber Bragg grating (FBG) sensor for embedment inside a lamina of composite laminates without strength reduction. The outside diameters of the cladding and polyimide coating are 40 and 52 μm, respectively. First, a brief summary is presented for applications of small-diameter FBG sensors to damage monitoring in composite structures. Then, we propose a new damage detection system for quantitative evaluation of delamination length in CFRP laminates using Lamb wave sensing. In this system, a piezo-ceramic actuator generates Lamb waves in a CFRP laminate. After the waves propagate in the laminate, transmitted waves are received by an FBG sensor attached on or embedded in the laminate using a newly developed high-speed optical wavelength interrogation system. This system was applied to detect interlaminar delamination in CFRP cross-ply laminates. When the Lamb waves passed through the delamination, the amplitude decreased and a new wave mode appeared. These phenomena could be well simulated using a finite element analysis. From the changes in the amplitude ratio and the arrival time of the new mode depending on the delamination length, it was found that this system could evaluate the delamination length quantitatively. Furthermore, small-diameter FBG sensors were embedded in a double-lap type coupon specimen, and the debonding progress could be evaluated using the wavelet transform.     

Catalytic effect of bis (cyclopentadienyl) nickel II on the improvement of the hydrogenation-dehydrogenation of Mg-MgH2 system

Bis(cyclopentadienyl) nickel II is one of the best precursors of nickel catalyst which remarkably improved the hydrogen absorption-desorption of Mg–MgH₂ system. The X-ray photoelectron spectroscopy (XPS) and Furrier Transformed Infrared Spectroscopy (FTIR) analyses revealed that bis (cyclopentadienyl) nickel II decomposed into metallic nickel during ball milling with MgH₂. The nickel thus formed has homogeneously doped over the Mg - MgH₂ surface. The Ni-doped Mg-MgH₂ have shown the excellent catalytic effect on hydrogen absorption-desorption. The catalyzed MgH₂ could desorb hydrogen below 225 °C (T_onset) under Ar flow, and absorb hydrogen at 50 °C under 1.5 MPa H₂ pressure. The hydrogen absorption-desorption temperatures are remarkably decreased as compared to the uncatalyzed Mg-MgH₂ system under the identical experimental conditions.     

Isolation and Characterization of Two Types of Xyloglucanases from a Phytopathogenic Fungus,Verticillium dahliae

Xyloglucan is a major hemicellulosic component in plant cell walls. Phytopathogenic fungi secrete cell wall-degrading enzymes on their infection to hosts, while the nature of the cell wall-lytic enzymes of such fungi are yet to be fully understood. Verticillium dahliae is a soil-borne fungus that causes vascular wilt diseases in a variety of commercially important crops worldwide. We purified two types of xyloglucanases, XEG12A and XEG74B, from the culture of naturally isolated Verticillium dahliae strain 2148. XEG12A showed a molecular size of 23 kDa with its maximal activity at pH 7.5. XEG12A specifically hydrolyzed xyloglucan with no activity on other β-glucans. XEG74B had a molecular size of 110 kDa with its optimum pH at 6.0. XEG74B primarily hydrolyzed xyloglucan, with a slight activity on β-1,3-1,4-glucan. Analysis of hydrolytic products of xyloglucanooligasaccharide (XXXGXXXG) by matrix-assisted laser desorption/ionization time-of-flight mass spectrometry (MALDI-TOF MS) revealed that the both enzymes cleaved β-1,4-glucosidic linkage at the position of unbranched chain, while XEG74B showed a little fluctuation with the cleavage site. Both enzymes did not hydrolyzed xyloglucanoheptasaccharide (XXXG) at all. N-Terminal and internal amino acid sequencing of the enzymes revealed that XEG12A and XEG74B belonged to Glycoside Hydrolase (GH) Families 12 and 74, respectively. Based on these results we concluded that V. dahliae XEG12A and XEG74B were xyloglucan-specific endo-β-1,4-glucanases (EC 3.2.1.151).     

Inter-comparison of various global sea surface temperature products

In this study, eight global sea surface temperature (SST) products for 2009 are compared to clarify their characteristics. The median of eight daily values, the Ensemble Median as Reference Product (EMRP), is used as a reference product for inter-comparison. The results show that the absolute value of mean differences and the value of root mean square (RMS) differences are higher in single-microwave products such as Advanced Microwave Scanning Radiometer for the Earth observing system (AMSR-E), Tropical Rainfall Measuring Mission Microwave Imager (TMI), and WindSat, than in products such as MicroWave Optimally Interpolated SST (MWOI), Merged satellite and in situ data Global Daily SST (MGD), and Operational Sea Surface Temperature and Sea Ice Analysis (OSTIA) constructed by merging several SST data. It is of note that the characteristics of SST products depend on the type of SST used within the product, rather than the data source used. A comparison of SST products was also conducted using EMRP and data observed by moored buoys. The results show that only AMSR-E has a warm bias (+0.06°C) while other products have a cool bias (maximum value ?0.10°C). The RMS error of TMI is the highest (0.57°C), and that of EMRP the lowest (0.28°C). Furthermore, the temporal variability between the data in each SST product was compared to those observed by the Kuroshio Extension Observatory (KEO) buoy. Results show that the temporal variability of EMRP corresponds well to that of buoy data, and that the RMS error of EMRP is lower than that of the other SST products.     

Intuitive substitute interface

This paper proposes the “Substitute Interface” to utilize the flat surfaces of objects around us as part of an ad hoc mobile device. The substitute interface is established by the combination of wearable devices such as a head-mounted display with camera and a ring-type microphone. The camera recognizes which object the user intends to employ. When the user picks up and taps the object, such as a notebook, a virtual display is overlaid on the object, and the user can operate the ad hoc mobile device as if the object were part of the device. Display size can be changed easily by selecting a larger object. The user’s pointing/selection action is recognized by the combination of the camera and the ring-type microphone. We first investigate the usage scene of tablet devices and create a prototype that can operate as a tablet device. Experiments on the prototype confirm that the proposal functions as intended.