Effect of hydrophilic and hydrophobic polymers on permeation of S-amlodipine besylate through intercalated polymeric transdermal matrix: 3(2) designing,optimization and characterization

Objective: Innovation in material science has made it possible to fabricate a pharmaceutical material of modifiable characteristics and utility, in delivering therapeutics at a sustained/controlled rate. The objective of this study is to design and optimize the controlled release transdermal films of S-Amlodipine besylate by intercalating hydrophilic and hydrophobic polymers.

Methods: 3(2) factorial design and response surface methodology was utilized to prepare formulations by intercalating the varied concentration of polymers(A) and penetration enhancer(B) in solvent. The effect of these independent factors on drug release and flux was investigated to substantiate the ex-vivo, stability and histological findings of the study.

Results: FTIR, DSC revealed the compatibility of drug with polymers; however, the semicrystallinity in drug was observed under PXRD. SEM micrographs showed homogeneous dispersion and entanglement of drug throughout the matrix. Results from the permeation study suggested the significant effect of factors on the ex vivo permeation of drug. It was observed that drug release was found to be increased with an increase in hydrophilic polymer concentration and PE. The formulations having polymers (EC:PVPK-30) at 7:3 showed maximum drug release with highest flux (102.60?±?1.12?µg/cm²/h) and permeability coefficient (32.78?±?1.38?cm/h). Significant effect of PE on lipid and protein framework of the skin was also observed which is responsible for increased permeation. The optimized formulation was found to be stable and showed no-sign of localized reactions, indicating safety and compatibility with the skin.

Conclusion: Thus, results indicated that the prepared intercalated transdermal matrix can be a promising nonoral carrier to deliver effective amounts of drug.     

Fabrication of Mn–ZnO photoanodes for photoelectrochemical water splitting applications

Journal of Materials Science: Materials in Electronics - A photoelectrochemical (PEC) water splitting ability of pure ZnO and manganese-incorporated ZnO thin films fabricated via a simple...     

Boosting the performance of visible light‐driven WO3/g‐C3N4 anchored with BiVO4 nanoparticles for photocatalytic hydrogen evolution

In this article, a ternary WO₃/g‐C₃N₄@ BiVO₄ composites were prepared using eco‐friendly hydrothermal method to produce efficient hydrogen energy through water in the presence of sacrificial agents. The prepared samples were characterized by scanning electron microscopy (SEM), scanning transmission electron microscopy (STEM), transmission electron microscopy (TEM), X‐ray diffraction (XRD), ultraviolet‐visible (UV‐vis), Brunauer‐Emmett‐Teller (BET) surface area, and photoluminescence spectroscopy (PL) emission spectroscopy. The experimental study envisages the formation of 2‐D nanostructures and observed that such kinds of nanostructures could provide more active sites for photocatalytic reduction of water and their inherent reactive‐species mechanism. The results showed the excellent photocatalytic performance (432 μmol h^?1 g^?1) for 1.5% BiVO₄ nanoparticles in WO₃/g‐C₃N₄ composite when compared with pure WO₃ and BiVO₄. The optical properties and photocatalytic activity measurement confirmed that BiVO₄ nanoparticles in WO₃/g‐C₃N₄ photocatalyst inhibited the recombination of photogenerated electron and holes and enhanced the reduction reactions for H₂ production. The enhanced photocatalytic efficiency of the composite nanostructures may be attributed to wide absorption region of visible light, large surface area, and efficient separation of electrons/holes pairs owing to synergistic effects between BiVO₄ and WO₃/g‐C₃N₄. The prepared samples would be a precise optimal photocatalyst to increase their suppliers for worldwide applications especially in energy harvesting.     

Data broadcasting strategies for cognitive radio based AMI networks

Wireless Networks - Communication systems play an important role in smart grid (SG). Advanced Metering Infrastructure (AMI) is hybrid architecture in smart grid comprising of smart meters and...     

A study on the synthesis,characterization and properties of polyaniline/magnesium boride nanocomposites

The present paper reports the novel synthesis of polyaniline/magnesium boride (PAni/MgB₂) nanocomposites. Nanowires 50–100 nm in diameter grown by the sol–gel technique were incorporated in the PAni to prepare PAni/MgB₂ nanocomposites, which yielded an enhancement of conductivity by 5 orders of magnitude. PAni was synthesized through the chemical oxidative polymerization method. The composition of the prepared nanocomposites was tunable, i.e. the amount of dopant was varied and the effects on various parameters were observed by different techniques. The morphology of PAni/MgB₂ nanocomposites was determined using SEM. The temperature dependence of the conductivity of all composites was measured in the temperature range 300–450 K and it was observed that samples having a high concentration of MgB₂ show the highest conductivity. The molecular structure of the nanocomposites was further characterized by Fourier Transform IR spectroscopy which showed small structural changes in the backbone of PAni. I?V measurements showed that the current increases on increasing MgB₂ content. UV?visible spectra exposed the occurrence of an indirect optical transition in the composite. © 2013 Society of Chemical Industry     

Alternative approach to compute shear amplification in high‐rise reinforced concrete core wall buildings using uncoupled modal response history analysis procedure

The seismic response of the high‐rise reinforced concrete (RC) wall structures is really complicated as several vibration modes other than the fundamental mode normally contribute significantly to the response—commonly recognized as ‘higher mode effects’. Response spectrum analysis (RSA) procedure, which can account for higher mode effects, is usually employed to compute the seismic design demand for the high‐rise structures. Recent studies show that the inelastic seismic force demands obtained from the rigorous nonlinear response history analysis procedure are much larger than the seismic force design demands obtained from the code‐based RSA procedure for the high‐rise RC wall structures. Though, the nonlinear response history analysis procedure is widely accepted for its ability to provide the most accurate estimate of nonlinear seismic responses, the obtained responses are generally so complex that it is quite difficult for engineers to grasp the overall picture of the responses and gain some insight into them and use them to understand the cause of high seismic demands. Another important issue related to the nonlinear seismic response prediction of the high‐rise RC wall structures is the realistic and accurate numerical modeling of RC walls. In this study, a simplified but reasonably accurate procedure called the uncoupled modal response history analysis procedure is used to interpret the complex nonlinear behavior of high‐rise RC wall structures. Moreover, a finite element model based on modified compression field theory is employed for accurate numerical modeling of RC walls by incorporating the axial‐flexure‐shear interaction. This study, by making use of a better computer modeling approach and an in‐depth analysis by modal decomposition, aims to resolve some of the unanswered questions regarding realistic prediction of nonlinear seismic demands of high‐rise structures.     

Endothelial repair process and its relevance to longitudinal neointimal tissue patterns: comparing histology with in silico modelling

Re-establishing a functional endothelium following endovascular treatment is an important factor in arresting neointimal proliferation. In this study, both histology (in vivo) and computational simulations (in silico) are used to evaluate neointimal growth patterns within coronary arteries along the axial direction of the stent. Comparison of the growth configurations in vivo and in silico was undertaken to identify candidate mechanisms for endothelial repair. Stent, lumen and neointimal areas were measured from histological sections obtained from eight right coronary stented porcine arteries. Two re-endothelialization scenarios (endothelial cell (EC) random seeding and EC growth from proximal and distal ends) were implemented in silico to evaluate their influence on the morphology of the simulated lesions. Subject to the assumptions made in the current simulations, comparison between in vivo and in silico results suggests that endothelial growth does not occur from the proximal and distal ends alone, but is more consistent with the assumption of a random seeding process. This may occur either from the patches of endothelium which survive following stent implantation or from attachment of circulating endothelial progenitor cells.     

Implementation constraints in social enterprise and community Public Private Partnerships

Public Private Partnership (PPP) employs private sector expertise and skill to provide public goods and services. We examine three community PPP projects to identify critical success factors of the project outcomes. Two conclusions particularly stand out: first, the project must be aligned with both the public and private parties' business and service plans, and second, appropriate management structures and procedures must be established for obtaining this alignment. The latter effect recognizes the need to implement appropriate project governance practices including management discipline and expertise. We investigate these ideas further and present specific guidelines for PPP project design and implementation.