Studying Fluid Characteristics Atop Surface Patterned Membranes via Particle Image Velocimetry

Surface patterning is a recent promising approach to promote performance of pressure-driven membranes in water treatment and desalination. Nevertheless, knowledge about foulant deposition mechanisms, especially at early stage of filtration, is still lacking. The applicability of particle imaging velocimetry to study fluid characteristics atop surface patterned thin-film composite membranes was investigated at different operating conditions. This work is an important first step toward reliable understanding of the impacts of topographical membrane surface modification on hydrodynamic conditions and foulant deposition mechanisms.     

Surface Modification of Ready-to-Use Hollow Fiber Ultrafiltration Modules for Oil/Water Separation

Reusing wastewater from oil-related industries is becoming increasingly important, especially in water-stressed oil-producing countries. Before oily wastewater can be discharged or reused, it must be properly treated, e.g., by membrane-based processes like ultrafiltration. A major issue of the applied membranes is their high fouling propensity. This paper reports on mitigating fouling inside ready-to-use ultrafiltration hollow-fiber modules used in a polishing step in oil/water separation. For this purpose, in-situ polyzwitterionic hydrogel coating was applied. The membrane performance was tested with oil nano-emulsions using a mini-plant system. The main factors influencing fouling were systematically investigated using statistical design of experiments.     

Tetranorsesquiterpenoids as Attractants of Yucca Moths to Yucca Flowers

Journal of Chemical Ecology - The obligate pollination mutualism between Yucca and yucca moths is a classical example of coevolution. Oviposition and active pollination by female yucca moths occur...     

Flexible Furnace Concepts for Vacuum Heat Treatment Combined with High-pressure Gas Quenching

IN the past five years the process combination of vacuum hardening, respectively vacuum carburizing with high-pressure gas quenching was successfully introduced to the market, especially in the manufacture of gears. In the meantime furnace concepts for various applications are available to the industry. In the following report three plant varieties are introduced, which differ in process flexibility and throughput. This report also explains criteria for the selection of a furnace in view of the existing application requirements. Besides this a short introduction is given into the vacuum carburizing process and the high-pressure gas quenching technology.     

Effects of carbon content and solidification rate on thermal conductivity of grey cast iron

The thermal conductivity or diffusivity of pearlitic grey irons with various carbon contents is investigated by the laser flash method. The materials are cast in controlled thermal environments and produced in three dissimilar cooling rates. The cooling rate together with the carbon content largely influence the thermal conductivity of grey iron. Linear relationships exist between the thermal conductivity and the carbon content, the carbon equivalent and the fraction of former primary solidified austenite transformed into pearlite. The work shows that optimal thermal transport properties are obtained at medium cooling rates. Equations describing the thermal conductivity of pearlite,solidified as pre-eutectic austenite, and the eutectic of grey iron are derived. The thermal conductivity of pearlitic grey iron is modeled at both room temperature and elevated temperature with good accuracy.     

Microstructural Investigation of Protective and Non-Protective Oxides on 11% Chromium Steel

FIB, SEM and STEM/EDX were used to investigate X20 stainless-steel samples exposed to dry O₂, or O₂ containing 40% H₂O, with a flow velocity of 0.5 cm/s or 5 cm/s, for 168 hr or 336 hr at 600°C. Thin protective Cr-rich (Cr,Fe)₂O₃ was maintained on the samples exposed to dry O₂, even after 336 hr, and on the sample exposed to O₂/H₂O mixture with the low-flow velocity (0.5 cm/s) for 168 hr. The oxide scale formed in the latter environment contained less Cr, due to Cr loss through CrO₂(OH)₂ evaporation. Breakaway oxidation occurred on the samples exposed in high-gas-flow velocity for shorter time (168 hr) or in low-gas-flow velocity (0.5 cm/s) for longer time (336 hr). The breakaway scales featured a two-layered structure: an outward-growing oxide “island” consisting of almost pure hematite (α-Fe₂O₃), and an inward-growing oxide “crater” consisting of (Cr,Fe)₃O₄. The transition from a thin protective (Cr,Fe)₂O₃ scale to a non-protective thick scale on this martensitic/ferritic steel originated locally and was followed by rapid oxide growth, resulting in a thick scale that covered the whole sample surface.     

The Inhibitive Effect of Traces of SO2 on the Oxidation of Iron

The oxidation of Fe was investigated at 500–700°C in the presence of O₂ with 0–1000 ppm SO₂. The exposures were carried out in a thermobalance and lasted for 24 h. The oxidized samples were investigated by grazing-angle XRD, SEM/EDX, GDOES and XPS. The rate of oxidation of pure iron is slowed down by traces of O₂ in O₂ below 600°C while SO₂ has no effect on oxidation rate at higher temperatures. Exposure to SO₂<600°C resulted in the formation of small amounts of sulfate at the gas/oxide interface. In addition, sulfur, probably sulfide, accumulated at the metal/oxide interface. The influence of SO₂ on oxidation rate is attributed to surface sulfate. The sulfur distribution in the scale is rationalized in terms of the thermodynamic stability of compounds in the Fe–O–S system. Exposure to SO₂ caused the formation of hematite whiskers.     

Production of niobium powder by magnesiothermic reduction of niobium oxides in a cyclone reactor

In the last years, a variety of processes respectively process steps have been investigated for the production of niobium powder. This is due to the fact that niobium capacitors could be a viable alternative to tantalum capacitors from a performance, availability, and price point of view. The reduction of niobium pentoxide by magnesium results in fine powders with high specific surface area but has the disadvantages of a very exothermic nature and the formation of magnesium niobate. It is shown in this work that the application of a continuously operating cyclone reactor and the use of niobium(IV) oxide as raw material solve these problems. A good control of the highly exothermic reaction within the cyclone reactor was achieved in the cyclone reactor by the ratio between gas flow rate and powder flow rate as well as by a proper preheating of the gas.     

Siamese multi-layer perceptrons for dimensionality reduction and face identification

This paper presents a framework using siamese Multi-layer Perceptrons (MLP) for supervised dimensionality reduction and face identification. Compared with the classical MLP that trains on fully labeled data, the siamese MLP learns on side information only, i.e., how similar of data examples are to each other. In this study, we compare it with the classical MLP on the problem of face identification. Experimental results on the Extended Yale B database demonstrate that the siamese MLP training with side information achieves comparable classification performance with the classical MLP training on fully labeled data. Besides, while the classical MLP fixes the dimension of the output space, the siamese MLP allows flexible output dimension, hence we also apply the siamese MLP for visualization of the dimensionality reduction to the 2-d and 3-d spaces.