Regionalization of Rainfall Intensity-Duration-Frequency using a Simple Scaling Model

Design storm is one of the most important tools to design hydraulic structures, hydrologic system and watershed management, mostly extracted by intensity- duration - frequency (IDF) curves for a given specific duration and return period. As for conventional methods to calculate IDF curves, the precipitation should be recorded for different durations so that foregoing curves can be extracted. Such data can be collected from rain gauge stations. In many areas, just daily precipitation data are available by which IDF curves cannot be extracted as per conventional methods. The aim of this research is to make IDF curves for short-term durations according to time scaling model as well as daily rainfalls. The relationships of this method are characterized with three variables including mean (μ ₂₄) and standard deviation (σ ₂₄) of daily rainfall intensity, and scaling exponent (H) by which all IDF curves might be drawn. The method used in present paper entails for less computational steps than conventional methods and by far has low parameters considerably than others in turn increases reliability. Scaling method is used to extract the IDF curves in rain-gauge stations in Khuzestan province located in southwest Iran and results proved the efficiency and robustness of the scaling method. Also ability of scaling concept method was examined in constructing of regional IDF.     

People tracking using a network-based PTZ camera

In this paper, we propose a method for online upper body tracking using an IP PTZ camera. This type of camera uses a built-in Web server resulting in variable response times when sending control commands. Furthermore, communicating with a Web server involves network delays. Thus, because the camera is inside a control loop, the effective frame rate that can be processed by a computer vision method is irregular and in general low (2–6 fps). Our tracking method has been specifically designed to perform in such conditions. It detects, at every frame, candidate blobs using motion detection, region sampling, and region color appearance. The target is detected among candidate blobs using a fuzzy classifier. Then, a movement command is sent to the camera using the target position and speed. The proposed method can cope with low frame rate, and thus with large motion of the target, even in the case of a fast walk. Results show that our system has a good target detection precision (>88%) and low track fragmentation, and the target is almost always localized within 1/6th of the image diagonal from the image center.     

Grafting of water‐soluble sulfonated monomers onto functionalized fumed silica nanoparticles via surface‐initiated redox polymerization in aqueous medium

Sulfonated polymer/fumed silica hybrid nanoparticles were prepared via surface‐initiated free radical polymerization of 2‐acrylamido‐2‐methyl‐1‐propane sulfonic acid (PAMPS‐g‐FSN), styrene sulfonic acid sodium salt (PSSA‐g‐FSN) and vinyl sulfonic acid sodium salt (PVSA‐g‐FSN) from the surface of aminopropyl‐functionalized fumed silica nanoparticles (AFSNs) dispersed in aqueous medium. Cerium(IV) ammonium nitrate/nitric acid and sodium dodecyl sulfate were used as redox initiator and stabilizer respectively. AFSNs were prepared by covalently attaching 3‐aminopropyltriethoxysilane onto the surface of fumed silica nanoparticles. Sulfonated monomers (AMPS, SSA or VSA) were then grafted onto the AFSNs ultrasonically dispersed in water via redox initiation at 40 °C. Structure, thermal properties, particle size and morphology of the AFSNs and PAMPS‐g‐FSN, PSSA‐g‐FSN and PVSA‐g‐FSN hybrid nanoparticles were characterized by Fourier transform infrared spectroscopy, TGA, SEM, transmission electron microscopy (TEM) and dynamic light scattering (DLS). The results indicated that the sulfonated monomers were successfully grafted onto the fumed silica nanoparticles. Grafting amounts of the sulfonated polymers onto the fumed silica nanoparticle surface were estimated from TGA thermograms to be 59%, 13% and 29% for the PAMPS, PSSA and PVSA, respectively. From SEM, TEM and DLS analysis, polymer‐grafted fumed silica nanoparticles with an average diameter smaller than 70 nm and a (semi‐) spherical shape were observed. A significant bimodal particle size distribution was observed only for the PAMPS‐g‐FSN with average diameters of 39.6 nm (84.1% per number) and 106 nm (15.9% per number). The hydrophilic sulfonated polymer/grafted fumed silica obtained from the redox graft polymerization gave a stable colloidal dispersion in acidic aqueous medium. Copyright © 2012 Society of Chemical Industry     

Novel design of a RF-MEMS tuneable capacitor based on electrostatically induced torsion

Micro-Electro-Mechanical System (MEMS) RF switches have been one of the most interesting areas for research and development in the last years. It has been shown that they have an excellent performance in the RF and microwave frequency range and a great effort has been dedicated in designing suitable geometries and structures best suited for switching application. In parallel other devices useful for the construction of complex RF circuits have been proposed and studied. Among these tuneable capacitors are of high interest for a variety of applications. In this paper we present a new electromechanical design for a tuneable capacitor with a totally different shape from usual designs. In particular we try to exploit the effect of the small in-plane force that develops during the polarization of a parallel plate capacitor with partially overlapping plates. First prototype realizations aiming at the development of the electromechanic aspects of the concept are discussed and analyzed and as the first realization showed some problems an improved design is presented.     

Structure–function relationships of fullerene esters in polymer solar cells: unexpected structural effects on lifetime and efficiency

We report both transport measurements and spectroscopic data of polymer/fullerene blend photovoltaics using a small library of fullerene esters to correlate device properties with a range of functionality and structural diversity of the ester substituent. We observe that minor structural changes can lead to significant and surprising differences in device efficiency and lifetime. For example we have found that isomeric R‐groups in the fullerene ester‐based devices we have studied have dramatically different efficiencies. The characteristic lifetimes derived from both transport and spectroscopic measurements are generally comparable; however, some more rapid effects in specific fullerene esters are not observed spectroscopically. It is apparent from our results that each fullerene derivative requires re‐optimization to reveal the best device performance. Furthermore we conclude that a library approach is essential for evaluating the effects of structural differences in the constituent molecules and serves as important device optimization method that is not being currently employed in photovoltaic investigations. Copyright © 2015 John Wiley & Sons, Ltd.