Sub-imaging technique to improve phase only filter search capability

A novel application of a phase only filter model, which is implementable in the optical domain, is proposed. In this application, automated target tracking is accomplished with a novel sub-imaging technique with correlation tracking inside a radius of interest. In this technique the image is subdivided and the correlation is tracked by comparing only the autocorrelation of the filter with itself. A radius of interest is used to reduce the number of computations required to track a moving target. Real-world video images are used to demonstrate the performance of the model.     

Production testing in miravalles geothermal field, Costa Rica

Wellbore deposition of calcium carbonate has occurred in the first wells drilled in the Miravalles geothermal field, Costa Rica. Well PGM-1 was flowtested for periods of 1, 5 and 6 months in 1980, 1981 and 1982, respectively. The well is 1300 m deep and produces from a liquid-dominated reservoir at about 240°C. The flowtests illustrate the time behavior of wells suffering from wellbore deposition. At early time the decrease in output flow rate and wellhead pressure is slow but at late time it becomes rapid; the curves are concave down. The ratio (flow rate/wellhead pressure) remains nearly constant with time for wells suffering calcium carbonate wellbore deposition, at least in the Miravalles geothermal field.     

Studies of alkali-silica reaction — part I a comparison of two accelerated test methods

The alkali-silica reactivity of 35 different sand types have been evaluated by both the “German” and NaCl bath methods. The results show that although there is a general correlation between the results of these two methods, the evaluations of sand by the two methods are not identical. Analyses of the procedures show the reasons and indicate that the salt bath method is preferable.The results also indicate that the use of a low alkali cement in conjunction with a reactive aggregate may not protect a concrete sample if sosium salts, from an outside source, can migrate and concentrate in it.     

The high power impulse magnetron sputtering discharge as an ionized physical vapor deposition tool

Various magnetron sputtering tools have been developed that provide a high degree of ionization of the sputtered vapor referred to as ionized physical vapor deposition (IPVD). The ions can be controlled with respect to energy and direction as they arrive to the growth surface which allows for increased control of film properties during growth. Here, the design parameters for IPVD systems are briefly reviewed. The first sputter based IPVD systems utilized a secondary plasma source between the target and the substrate in order to generate a highly ionized sputtered vapor. High power impulse magnetron sputtering (HiPIMS) is a recent sputtering technique that utilizes IPVD where a high density plasma is created by applying high power pulses at low frequency and low duty cycle to a magnetron sputtering device. A summary of the key experimental findings for the HiPIMS discharge is given. Measurements of the temporal and spatial behavior of the plasma parameters indicate electron density peak, that expands from the target with a fixed velocity. The discharge develops from an inert sputtering gas dominated to a sputtered vapor dominated during the pulse. The high electron density results in a high degree of ionization of the deposition material.     

In-situ electrical characterization of ultrathin TiN films grown by reactive dc magnetron sputtering on SiO2

Ultrathin TiN films were grown by reactive dc magnetron sputtering on thermally oxidized Si (100) substrates. The electrical resistance of the films was monitored in-situ during growth in order to determine the minimum thickness of a continuous film. The coalescence thickness has a minimum of 1 nm at a growth temperature of 400 °C after which it increases with growth temperature. The minimum thickness of a continuous film decreases with increasing growth temperature from 2.9 nm at room temperature to 2.2 nm at 650 °C. In-situ resistivity measurements show that films grown at 500 °C and above are resistant to oxidation indicating high density. X-ray photoelectron spectroscopy and X-ray diffraction measurements show that the TiN grain stoichiometry and grain size increases with increasing growth temperature.     

Online Fouling Detection of Domestic Hot Water Heat Exchangers

Due to hardness of cold water supply in many countries, there is a risk of fouling in domestic hot water (DHW) counterflow plate heat exchangers. The scaling will result in increased resistance to heat transfer, which has negative effects on the economics of the district heating network. A common approach is to clean or change the heat exchanger periodically, which can be expensive if only limited fouling has occurred (unnecessary) or if a higher than expected scaling layer has formed (inefficiency). A better approach is to monitor the state of the heat exchangers and clean them when actually required. This would result in more energy-efficient operation and provide an optimum schedule for heat exchanger cleaning. This can be simple if the heat exchangers are operating under steady-state conditions; however, if large variations in the inlets are experienced, as is the case with the mass flows in DHW heat exchangers, it quickly becomes impossible with standard methods. In this paper it is proposed to monitor the state of the heat exchanger online by using measurements that are easily obtainable under normal operation and applying fast mathematical models to estimate the overall heat transfer coefficient of the heat exchanger. The results show that the methods proposed can be used to detect fouling in DHW heat exchangers.     

Complications to the use of vicryl-collagen dural substitute

The authors describe 3 cases of postoperative infection as a complication after the use of vicryl-collagen dural substitute. The substitute had already partially dissolved 2 weeks after surgery with the remnant so densely adherent to the brain surface that it could not be removed without damaging the cortex. This was confirmed microscopically.