Preparation and soft lithographic printing of nano-sized ITO-dispersions for the manufacture of electrodes for TFTs

The production of printed electronics exhibits an enormous economical potential due to the possibility to manufacture innovative products at low cost. At the moment, one of the major challenges for the fabrication of printed electronics is the controllability of the material properties during processing and the miniaturization of the deposited structures. In this context, the application of soft lithographic techniques appears promising, because they allow a defined patterning of the materials in the range of few nanometers, which is far below the limits of other printing techniques like inkjet-printing or screen printing. This work proves the applicability of the soft lithographic technique micro-molding in capillaries (MIMIC) for the manufacture of conductive indium tin oxide (ITO) electrodes. For the creation of stable dispersions of ITO nano-sized particles, steric as well as electrostatic stabilization concepts are applied. The prepared dispersions are characterized with regard to the later processing via MIMIC. The geometry and the electrical properties of the soft lithographically deposited structures are determined to prove their functionality. Special attention is paid to the influence of the wetting behavior of the dispersions on the resulting geometry of the structures. Finally, the applicability of the optimized structures is demonstrated by the assembly of a thin film transistor (TFT), in which the deposited structures serve as source and drain electrodes.     

Project planning practices based on enterprise resource planning systems in small and medium enterprises — A case study from the Republic of Macedonia

This paper examines whether Macedonian SMEs plan for the implementation of ERP projects and studies the effect of project planning practices on project success. Four project planning measures were taken into consideration: business case development, scope planning, baseline plan development and risk planning along with three measures of project success; customer satisfaction, perceived quality of the project and success of the implementation process. The study was based on a survey that was conducted on 30 SMEs in the Republic of Macedonia. Data dimensionality was reduced through factor analysis and relationships between the two sets of variables were analyzed by correlation and regression analyses. The findings demonstrated that Macedonian SMEs implemented general project planning practices, even though they did not consider the planning process as a separate phase of the ERP implementation. However, they did not use any particular project planning tools, such as the Gantt chart or WBS. Of the project planning practices that were surveyed, the most practiced were the development of a business case, project scope and baseline plan. The least practiced were risk planning practices. Considering the success of the ERP implementations, this study demonstrated that most of the companies' representatives perceive this undertaking as successful in terms of client satisfaction and perceived quality measures. A higher percentage of respondents found their ERP implementations unsuccessful in terms of implementation process measures, when compared to the previous two success parameters.     

Internal reflection ellipsometry for real-time monitoring of polyelectrolyte multilayer growth onto tantalum pentoxide

Internal reflection ellipsometry was used for detection of the consecutive coating of two polyelectrolytes, poly(allylamine hydrochloride) (PAH) and poly(acrylic acid) (PAA), onto a tantalum pentoxide (Ta₂O₅) substrate until the 10th bilayer. The UV patterned PAH-PAA-multilayer was characterized in air via ellipsometry and atomic force microscopy. Suited optical models enabled the determination of the layer thicknesses in wet and dry states. Linear multilayer formation could be proved by Attenuated Total Reflection — Fourier Transformed Infrared Spectroscopy measurements following the increase of the ν(C=O) band depending on the adsorption of the PAA. Streaming potential measurements after each layer deposition step indicated a change in surface charge after each layer deposition due to the consecutive coating of PAH and PAA. In this article the internal reflection ellipsometry is shown to be a convenient possibility to analyze the modification of a thin transparent Ta₂O₅ substrate.     

Neonatal imitation in the first hour of life: Observations in rural Nepal.

Neonatal imitative responses were studied in 12 Maithil neonates (6 boys and 6 girls) during their first hour postpartum. No drugs were administered prior to or during labor, and the delivery was concluded without complications. The neonates observed two modeling conditions: lips widened and lips pursed. It was found that neonates moved their lips significantly more often in accordance with the model's lip position than at variance with the positions. These results suggest, when considered in the light of studies of Caucasian infants of North American and European parentage, that imitative capacity is present at birth. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Biomimetic mineral-organic composite scaffolds with controlled internal architecture

Bone and cartilage generation by three-dimensional scaffolds is one of the promising techniques in tissue engineering. One approach is to generate histologically and functionally normal tissue by delivering healthy cells in biocompatible scaffolds. These scaffolds provide the necessary support for cells to proliferate and maintain their differentiated function, and their architecture defines the ultimate shape. Rapid prototyping (RP) is a technology by which a complex 3-dimensional (3D) structure can be produced indirectly from computer aided design (CAD). The present study aims at developing a 3D organic-inorganic composite scaffold with defined internal architecture by a RP method utilizing a 3D printer to produce wax molds. The composite scaffolds consisting of chitosan and hydroxyapatite were prepared using soluble wax molds. The behaviour and response of MC3T3-E1 pre-osteoblast cells on the scaffolds was studied. During a culture period of two and three weeks, cell proliferation and in-growth were observed by phase contrast light microscopy, histological staining and electron microscopy. The Giemsa and G?m?ri staining of the cells cultured on scaffolds showed that the cells proliferated not only on the surface, but also filled the micro pores of the scaffolds and produced extracellular matrix within the pores. The electron micrographs showed that the cells covering the surface of the struts were flattened and grew from the periphery into the middle region of the pores.     

Placental Villous Explant Culture 2.0: Flow Culture Allows Studies Closer to the In Vivo Situation

During pregnancy, freely floating placental villi are adapted to fluid shear stress due to placental perfusion with maternal plasma and blood. In vitro culture of placental villous explants is widely performed under static conditions, hoping the conditions may represent the in utero environment. However, static placental villous explant culture dramatically differs from the in vivo situation. Thus, we established a flow culture system for placental villous explants and compared commonly used static cultured tissue to flow cultured tissue using transmission and scanning electron microscopy, immunohistochemistry, and lactate dehydrogenase (LDH) and human chorionic gonadotropin (hCG) measurements. The data revealed a better structural and biochemical integrity of flow cultured tissue compared to static cultured tissue. Thus, this new flow system can be used to simulate the blood flow from the mother to the placenta and back in the most native-like in vitro system so far and thus can enable novel study designs.     

A Versatile Route to Assemble Semiconductor Nanoparticles into Functional Aerogels by Means of Trivalent Cations

3D nanoparticle assemblies offer a unique platform to enhance and extend the functionality and optical/electrical properties of individual nanoparticles. Especially, a self‐supported, voluminous, and porous macroscopic material built up from interconnected semiconductor nanoparticles provides new possibilities in the field of sensing, optoelectronics, and photovoltaics. Herein, a method is demonstrated for assembling semiconductor nanoparticle systems containing building blocks possessing different composition, size, shape, and surface ligands. The method is based on the controlled destabilization of the particles triggered by trivalent cations (Y³⁺, Yb³⁺, and Al³⁺). The effect of the cations is investigated via X‐ray photoelectron spectroscopy. The macroscopic, self‐supported aerogels consist of the hyperbranched network of interconnected CdSe/CdS dot‐in‐rods, or CdSe/CdS as well as CdSe/CdTe core‐crown nanoplatelets is used to demonstrate the versatility of the procedure. The non‐oxidative assembly method takes place at room temperature without thermal activation in several hours and preserves the shape and the fluorescence of the building blocks. The assembled nanoparticle network provides longer exciton lifetimes with retained photoluminescence quantum yields, that make these nanostructured materials a perfect platform for novel multifunctional 3D networks in sensing. Various sets of photoelectrochemical measurements on the interconnected semiconductor nanorod structures also reveal the enhanced charge carrier separation.     

Patterning of Nanoparticle‐Based Aerogels and Xerogels by Inkjet Printing

Nanoparticle‐based voluminous 3D networks with low densities are a unique class of materials and are commonly known as aerogels. Due to the high surface‐to‐volume ratio, aerogels and xerogels might be suitable materials for applications in different fields, e.g. photocatalysis, catalysis, or sensing. One major difficulty in the handling of nanoparticle‐based aerogels and xerogels is the defined patterning of these structures on different substrates and surfaces. The automated manufacturing of nanoparticle‐based aerogel‐ or xerogel‐coated electrodes can easily be realized via inkjet printing. The main focus of this work is the implementation of the standard nanoparticle‐based gelation process in a commercial inkjet printing system. By simultaneously printing semiconductor nanoparticles and a destabilization agent, a 3D network on a conducting and transparent surface is obtained. First spectro‐electrochemical measurements are recorded to investigate the charge–carrier mobility within these 3D semiconductor‐based xerogel networks.     

Artificial Light Regulation of an Allosteric Bienzyme Complex by a Photosensitive Ligand

The artificial regulation of proteins by light is an emerging subdiscipline of synthetic biology. Here, we used this concept to photocontrol both catalysis and allostery within the heterodimeric enzyme complex imidazole glycerol phosphate synthase (ImGP‐S). ImGP‐S consists of the cyclase subunit HisF and the glutaminase subunit HisH, which is allosterically stimulated by substrate binding to HisF. We show that a light‐sensitive diarylethene (1,2‐dithienylethene, DTE)‐based competitive inhibitor in its ring‐open state binds with low micromolar affinity to the cyclase subunit and displaces its substrate from the active site. As a consequence, catalysis by HisF and allosteric stimulation of HisH are impaired. Following UV‐light irradiation, the DTE ligand adopts its ring‐closed state and loses affinity for HisF, restoring activity and allostery. Our approach allows for the switching of ImGP‐S activity and allostery during catalysis and appears to be generally applicable for the light regulation of other multienzyme complexes.