Comparative study on the assay for IgE antibodies specific for Chamaecyparis obtusa pollen between AlaSTAT and CAP-RAST

Titers of IgE antibody specific for the pollen of Chamaecyparis obtusa (C. obtusa) were determined by AlaSTAT and CAP-RAST in 221 patients with Japanese cedar pollinosis. IgE antibody to C. obtusa tested positive by CAP-RAST at a higher rate (80.5%) than by AlaSTAT (52.6%). The results obtained from the two assays were compared with those from intradermal skin test. CAP-RAST had a higher sensitivity than that of AlaSTAT. Because the two methods showed no differences in the determination of IgE antibody specific for Cryptomeria japonica, the above differences between AlaSTAT and CAP-RAST are surmised to be ascribable to the differences of C. obtusa antigen used in the both assays.     

Preparation and characterization of porous and electrically conducting carbon-clay composites

Porous and electrically conducting carbon-clay composites were prepared by firing mixtures of carbon powder (0 to 20 wt%) and clay minerals. They showed porosity of 50 to 65% and had high mechanical strength (compressive strength = 130 to 400 kg cm^–2) as well as high resistance against thermal oxidation in air. Their electrical conductivity, , increased with increasing carbon content levelling off at about 20 wt% of carbon content to give a value of about 2 S cm^–1. Formation of carbon chains is considered to be responsible for the electrical conduction in the composite, and a model to correlate the electrical conductivity with the carbon content has been proposed by modifying a model previously proposed by Scarisbrick.     

Preparation of fine particles of carnegieite by a mist decomposition method

A mist of a hydrosol consisting of silica, alumina/NaAlO₂ and sodium hydroxide was produced by a supersonic atomization, and treated successively in three furnaces of different temperatures. The temperatures of the furnaces were adjusted for the evaporation of water, the dehydration and the crystallization of the mixed oxide, respectively. The spherical particles ( 0.5m) of carnegieite were found to be formed in a narrow composition range of the raw materials at temperatures of 650 to 900° C. The factors affecting the properties of the particles were investigated.     

Protective effect of phytic acid hydrolysis products on iron-induced lipid peroxidation of liposomal membranes

Beneficial effects of dietary phytic acid (myo-inositol hexaphosphate; IP₆) have often been explained by its strong iron ion-chelating ability, which possibly suppresses iron ion-induced oxidative damage in the gastrointestinal tract. Because phytic acid is hydrolyzed during digestion, this work aimed to know whether its hydrolysis products (IP_2′ IP_3′, IP_4′ and IP₅) could still prevent iron ion-induced lipid peroxidation. Studies using liposomal membranes demonstrated that hydrolysis products containing three or more phosphate groups are able to inhibit iron ion-induced lipid peroxidation although their effectiveness decreased with dephosphorylation. Similarly, they also prevented iron ion-induced decomposition of phosphatidylcholine hydroperoxide. These results demonstrate that intermediate products of phytic acid hydrolysis still possess iron ion-chelating ability, and thus they can probably prevent iron ion-induced lipid peroxidation in biological systems.     

Hydrophilic surface modification of polypropylene films by CCl4 plasma

The CCl₄ plasma treatment of polypropylene films was investigated from the viewpoint of hydrophilic surface modification using a contact-angle meter, ATR FTIR spectroscopy, and angular XPS. Hydrophilicity and chemical composition of the CCl₄ plasma treatment was effective in hydrophilic modification. The advancing contact angle of water for polypropylene films was decreased from 99° to 81-7° by the CCl₄ plasma treatment, and the surface energy increased from 27.2 to 38.9-67.7 mJ/m² when the discharge current varied from 50 to 150 mA. The CCl₄ plasma initiated chlorination, oxidation, and aluminum sputtering reactions. The chlorination of polypropylene films was favorable in a mild CCl₄ plasma operated at discharge current of 50 mA. The oxidation and aluminum sputtering reactions were predominant over the chlorination in strong CCl₄ plasmas operated at discharge currents of more than 75 mA. The chlorination initiated by the mild CCl₄ plasma was restricted near the film surface within 36 Å deep. The regions modified with the strong CCl₄ plasma reached inner layers of 36-49 Å deep. Hydrophilicity caused by the CCl₄ plasma treatment may be due not only to chlorine functionalities but also to oxygen and aluminum functionalities. © 1993 John Wiley & Sons, Inc.     

Evaluation for distance learning scheme on distributed multiple server system

A distributed multiple server system is designed and implemented with Web-DB based services for distance learning as well as emergency communication. The system has employed multiple servers located in a distributed campus network environment. Each server of the system has multi-core processors. With so-called “server virtualization” technology, some programs are executed in parallel (on the virtual servers) so that such a system can efficiently perform several functions. For example, two or more application services can be performed simultaneously as “cloud services” on the whole system. The system can provide distance learning scheme for educational tool, at the same time it can also support Web-based surveillance facilities for emergency contact. With qualitative and quantitative approach, trial evaluation of system has been performed in some classrooms of distributed campus. And users can obtain some good results from the above evaluation.     

One-Step Synthesis of Luminescent Nanoparticles of Complex Oxide, Strontium Aluminate

An organic aqueous solution of metal acetylacetonate precursors was subjected to spray pyrolysis in order to fabricate SrAl₂O₄:Eu (SAO) nanoparticles. Non-agglomerated luminescent SAO nanoparticles, having a spherical shape with a size of 10–30 nm, were achieved in a single step, while only submicrometer-sized SAO particles were obtained from the conventional ultrasonic pyrolysis of the metal nitrates. Without any post-annealing process, the as-prepared SAO nanoparticles were observed to exhibit a strong photoluminescence, which is comparable with that of the submicrometer-sized SAO particles. A mechanism for the formation of the nanoparticles is also discussed.     

Synthesis and luminescence properties of Pr3+ doped CaxBa1?xTiO3 (0.3?x<1) fine particles

Ca _x Ba_1−x TiO₃ (CBT) fine particles doped with red luminescence center of Pr³⁺ ions (Pr: CBT) were successfully synthesized by salt assisted spray pyrolysis (SASP) process. Scanning electronic microscope (SEM) and laser scattering analysis demonstrate that salt can be removed from the surface of particles by washing with Milli-Q water and the particles can be further separated by ball-milling to get well-dispersed Pr³⁺ ions doped CBT fine particles. The luminescence properties, such as photoluminescence (PL) and mechanoluminescence (ML), of as-synthesized Pr: CBT particles were investigated. For Pr: CBT fine particles with different Ca molar ratios, all the samples show one emission at 612 nm, with increasing Ca molar ratio, PL intensity of Pr: CBT fine particles become stronger and stronger. When pressure was loaded on the Pr: CBT pellet, mechanoluminescence(ML) emission was measured. The results show that the ML intensity is proportional to the applied pressure.     

Some characteristics of a sparged agitated vessel under foaming — Mechanical control of foaming —

Foam-breaking with a rotating disk mechanical foam-breaker (MFRD) was studied for a foaming system containing a diluted detergent solution in a laboratory sparged agitated vessel. The change of the foam-breaking capacity of the MFRD by varying the air sparge rate, the working volume and the impeller speed or the disk diameter was measured. Based on these measurements, empirical equations are presented for predicting the critical foam-breaking regions of the MFRD fitted with the agitated vessel. The operational range where foam-breaking with the MFRD can be carried out effectively and economically is also discussed.     

Adsorption and desorption properties of cationic polyethylene film gels to organic anions and their regeneration

An investigation was undertaken on the adsorption and desorption properties of 2‐(dimethylamino)ethyl methacrylate grafted polyethylene (PE‐g‐PDMAEMA) films to anionic dye anions with one to three sulfonic groups in response to pH and temperature changes. The amounts of dye anions adsorbed on the PE‐g‐PDMAEMA films passed through the maximum values at about pH 3 because of an increase in the protonation of dimethylamino groups caused by a decrease in the pH value. The amounts of adsorbed dye anions decreased below pH 3 because the ionic strength increased with the addition of HCl to adjust the initial pH values of the aqueous dye solutions. The amounts of adsorbed dye anions decreased with an increase in the number of sulfonic groups in the dye molecules at the same pH value because electrostatic repulsion was generated between free sulfonic groups of the dye anions adsorbed onto the PE‐g‐PDMAEMA films and free dye anions in the medium. A large number of dye anions adsorbed were desorbed from the PE‐g‐PDMAEMA film with initial pH values above 11.0. The cyclic processes of adsorption at pH 3.0 and desorption at pH 11.0 were repeated without considerable fatigue. The PE‐g‐PDMAEMA films showed practically regenerative adsorption and desorption behavior in response to the pH changes. In addition, when the dye‐anion‐adsorbed PE‐g‐PDMAEMA films were alternately immersed in water at two different temperatures, dye anions were desorbed in water at higher temperatures without any chemical agents because of the deprotonation of dimethylamino groups and thermosensitive contraction of grafted PDMAEMA chains. These results indicate that PE‐g‐PDMAEMA films can be applied as regenerative ion‐exchange membranes for adsorption and desorption processes of anionic compounds in response to the pH and temperature. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci 99: 381–391, 2006