A study of moderately thick quadrilateral plate elements based on the absolute nodal coordinate formulation

Finite element analysis using plate elements based on the absolute nodal coordinate formulation (ANCF) can predict the behaviors of moderately thick plates subject to large deformation. However, the formulation is subject to numerical locking, which compromises results. This study was designed to investigate and develop techniques to prevent or mitigate numerical locking phenomena. Three different ANCF plate element types were examined. The first is the original fully parameterized quadrilateral ANCF plate element. The second is an update to this element that linearly interpolates transverse shear strains to overcome slow convergence due to transverse shear locking. Finally, the third is based on a new higher order ANCF plate element that is being introduced here. The higher order plate element makes it possible to describe a higher than first-order transverse displacement field to prevent Poisson thickness locking. The term “higher order” is used, because some nodal coordinates of the new plate element are defined by higher order derivatives. The performance of each plate element type was tested by (1) solving a comprehensive set of small deformation static problems, (2) carrying out eigenfrequency analyses, and (3) analyzing a typical dynamic scenario. The numerical calculations were made using MATLAB. The results of the static and eigenfrequency analyses were benchmarked to reference solutions provided by the commercially available finite element software ANSYS. The results show that shear locking is strongly dependent on material thickness. Poisson thickness locking is independent of thickness, but strongly depends on the Poisson effect. Poisson thickness locking becomes a problem for both of the fully parameterized element types implemented with full 3-D elasticity. Their converged results differ by about 18 % from the ANSYS results. Corresponding results for the new higher order ANCF plate element agree with the benchmark. ANCF plate elements can describe the trapezoidal mode; therefore, they do not suffer from Poisson locking, a reported problem for fully parameterized ANCF beam elements. For cases with shear deformation loading, shear locking slows solution convergence for models based on either the original fully parameterized plate element or the newly introduced higher order plate element.     

A large-displacement 65Pb(Mg1/3Nb2/3)O3–35PbTiO3/Pt bimorph actuator prepared by screen printing

In this paper we present a novel approach to preparing large-displacement 65Pb(Mg_1/3Nb_2/3)O₃–35PbTiO₃/Pt (65/35 PMN–PT/Pt) bimorph actuators. These “substrate-free”, bending-type actuators were prepared by screen-printing the 65/35 PMN–PT and Pt thick-film pastes as the electrodes on alumina substrates. After this screen printing and the subsequent firing the 65/35 PMN–PT/Pt composites were peeled off from the substrates. Displacements of nearly 100 μm at 18 V were achieved for actuators with dimensions of 1.8 cm × 2.5 mm × 50 μm for the 65/35 PMN–PT layer. The normalized displacement (the displacement per unit length) was 40 μm/cm at 18 V. The experimental results together with a computation procedure were used to obtain the material parameters for a finite-element analysis of the 65/35 PMN–PT/Pt bimorph actuators.     

Problematic Instant Messaging Use

This study is an empirical investigation of problematic instant messaging (IM) use among university students in Singapore. It adapts Caplan's (2005) theoretical framework of problematic Internet use (PIU) to the context of problematic IM use by linking pre-existing human dispositions to cognitive-behavioral symptoms and negative outcomes of improper IM use. Four new factors—oral communication apprehension, polychronicity, perceived inconvenience of using offline communication means, and trait procrastination—were tested as predictors of problematic IM use. The results provided strong support for Caplan's theoretical framework of PIU and indicated that oral communication apprehension and perceived inconvenience of using offline means were significant predictors of problematic IM use, whereas polychronicity and trait procrastination were not. The implications of these findings are discussed.     

Wet Chemical Treatment and Mg Doping of p-InP Surfaces for Ohmic Low-Resistive Metal Contacts

Manufacturing a low-resistive Ohmic metal contact on p-type InP crystals for various applications is a challenge because of the Fermi-level pinning via surface defects and the diffusion of p-type doping atoms in InP. Development of wet-chemistry treatments and nanoscale control of p-doping for InP surfaces is crucial for decreasing the device resistivity losses and durability problems. Herein, a proper combination of HCl-based solution immersion, which directly provides an unusual wet chemical-induced InP(100)c(2 × 2) atomic structure, and low-temperature Mg-surface doping of the cleaned InP before Ni-film deposition is demonstrated to decrease the contact resistivity of Ni/p-InP by the factor of 10 approximately as compared to the lowest reference value without Mg. Deposition of the Mg intermediate layer on p-InP and postheating of Mg/p-InP at 350 °C, both performed in ultrahigh-vacuum (UHV) chamber, lead to intermixing of Mg and InP elements according to X-ray photoelectron spectroscopy. Introducing a small oxygen gas background (O₂ ≈ 10⁻⁶ mbar) in UHV chamber during the postheating of Mg/p-InP enhances the indium outdiffusion and provides the lowest contact resistivity. Quantum mechanical simulations indicate that the presence of InP native oxide or/and metal indium alloy at the interface increases In diffusion.     

Knowledge based quality-driven architecture design and evaluation

Modelling and evaluating quality properties of software is of high importance, especially when our every day life depends on the quality of services produced by systems and devices embedded into our surroundings. This paper contributes to the body of research in quality and model driven software engineering. It does so by introducing; (1) a quality aware software architecting approach and (2) a supporting tool chain. The novel approach with supporting tools enables the systematic development of high quality software by merging benefits of knowledge modelling and management, and model driven architecture design enhanced with domain-specific quality attributes. The whole design flow of software engineering is semi-automatic; specifying quality requirements, transforming quality requirements to architecture design, representing quality properties in architectural models, predicting quality fulfilment from architectural models, and finally, measuring quality aspects from implemented source code. The semi-automatic design flow is exemplified by the ongoing development of a secure middleware for peer-to-peer embedded systems.     

Reliable Distributed Storage

A distributed storage service lets clients abstract a single reliable shared storage device using a collection of possibly unreliable computing units. Algorithms that implement this abstraction offer certain tradeoffs and vary according to dimensions such as complexity, the consistency semantics provided, and the types of failures tolerated.     

Digit Pipelined Arithmetic for 3-D Massively Parallel Optoelectronic Circuits

A concept for a future integer arithmetic unit suitable for a realization with 3-D optoelectronic very large scale integrated (VLSI) circuits is presented. Due to the use of optical interconnections running vertically to the circuit's surface no pin limitation is given. This allows massively parallelism and a higher throughput performance than in all-electronic solutions. To exploit the potential of optical interconnections in VLSI systems efficiently well-adapted low-level algorithms and architectures have to be developed. This is demonstrated for a pipelined arithmetic unit using a redundant number representation. A transistor layout for the optoelectronic circuits is given as well as a specification for the necessary optical interconnection scheme linking the circuits with free-space optics. It is shown that the throughput can be increased by a factor of 10 to 50 compared to current all-electronic processors by considering state-of-the-art optical and optoelectronic technology. Furthermore we present results we gained by investigations on a first realized optoelectronic VLSI test chip.     

Utilizing national public-key infrastructure in mobile payment systems

Payments are the locomotive behind any business domain. It has been predicted that mobile payments will become one of the most successful mobile services, and the security of payments is an important requirement. However, it is difficult to strongly authenticate mobile users remotely and provide an adequate level of non-repudiation of transactions. In this article, we argue that a nationwide public-key infrastructure supported by governmental bodies can be used in a mobile payment system. Not only does it provide strong security, but it also makes the system open to any mobile user, merchant, or financial service provider. Two payment protocols are described: one for virtual point-of-sale payments, and one for vending machine payments. We argue that such a system can be implemented using open development platforms, and its performance is adequate for enabling swift transactions. A prototype of a system which accepts virtual point-of-sale payments is implemented, and its performance and usability are evaluated.     

Artists portray human faces with the Fourier statistics of complex natural scenes

When artists portray human faces, they generally endow their portraits with properties that render the faces esthetically more pleasing. To obtain insight into the changes introduced by artists, we compared Fourier power spectra in photographs of faces and in portraits by artists. Our analysis was restricted to a large set of monochrome or lightly colored portraits from various Western cultures and revealed a paradoxical result. Although face photographs are not scale-invariant, artists draw human faces with statistical properties that deviate from the face photographs and approximate the scale-invariant, fractal-like properties of complex natural scenes. This result cannot be explained by systematic differences in the complexity of patterns surrounding the faces or by reproduction artifacts. In particular, a moderate change in gamma gradation has little influence on the results. Moreover, the scale-invariant rendering of faces in artists' portraits was found to be independent of cultural variables, such as century of origin or artistic techniques. We suggest that artists have implicit knowledge of image statistics and prefer natural scene statistics (or some other rules associated with them) in their creations. Fractal-like statistics have been demonstrated previously in other forms of visual art and may be a general attribute of esthetic visual stimuli.