<Emphasis Type="Italic">Arabidopsis thaliana:</Emphasis> A New Test Species for Phytotoxic Bioassays

Lettuce seeds (Lactuca sativa L.) and other crop species are often used in phytotoxic bioassays that are designed to detect allelochemicals. The seeds of these species are considered ideal because they are readily available, germinate rapidly and uniformly, and are routinely used in laboratories around the world. Despite their common use, however, the seeds of these species are often not as sensitive or responsive to some phytotoxic chemicals as are the seeds of other species. While searching for a more sensitive test species for phytotoxic bioassays, the Columbia ecotype of Arabidopsis thaliana exhibited greater sensitivity to seven potent allelochemicals than did lettuce seeds, which, in some cases, did not respond at all to those substances. Sensitivity satisfies one of the criteria for selecting a test species for bioassays. We now report on the results of our study and offer additional reasons for using A. thaliana seeds.     

A Comparative Biochemical Characterization of Microbial Transglutaminases: Commercial vs. a Newly Isolated Enzyme from <Emphasis Type="Italic">Streptomyces</Emphasis> Sp.

A new microbial transglutaminase (MTGase or MTG, EC 2.3.2.13) from a Streptomyces sp. strain isolated from Brazilian soil samples was characterized in crude and purified forms. The aim of this work is to provide relevant information about a new transglutaminase and to compare its characteristics with the well-known commercial transglutaminase from Ajinomoto Co. Inc. (Activa® TG-BP). The enzyme from Streptomyces sp., in both crude and pure forms, exhibited optimal activity in the 6.0–6.5 pH range and at 35–40°C. The results for the commercial enzyme were the same. A second maximum of activity was observed at pH 10.0 with both the crude Streptomyces sp. enzyme and the commercial enzyme. This interesting fact has not been reported in the literature previously. The fact that this second maximum of activity does not appear on the purified form of the enzyme may suggest the presence of an isoenzyme on the crude extract. All of the enzymes tested were stable over the pH range from 4.5 to 8.0 and up to 45°C. The decline in activity of the commercial transglutaminase above 45°C and pH 8.0 was more gradual. The activities of all the MTG samples were independent of Ca⁺² concentration, but they were elevated in the presence of K⁺, Ba²⁺, and Co²⁺ and inhibited by Cu²⁺ and Hg²⁺, which suggests the presence of a thiol group in the MTG’s active site. The purified enzyme presented a K _m of 6.37 mM and a V _max of 1.7 U/mL, while the crude enzyme demonstrated a K _m of 6.52 mM and a V _max of 1.35 U/mL.     

Fractal Extra-Framework Species in De-aluminated LaY Zeolites and Their Catalytic Activity

Lanthanum-containing Y (LaY) zeolites were prepared by ionic exchange from NaY parent zeolite. The LaY zeolites were de-aluminated by steaming. De-aluminated zeolites presented different Si/Al ratio. The physicochemical properties of these catalysts were characterized by X-ray diffraction, pyridine and xenon adsorption, infrared spectroscopy and ²⁹Si, ²⁷Al, ¹²⁹Xe, ¹³⁹La solid-state nuclear magnetic resonance spectroscopy. Furthermore, a fractal geometry approach was adopted to describe the evolution in the texture as a consequence of de-alumination. The catalytic properties of materials were evaluated in the n-hexane cracking reaction. The catalyst with the highest catalytic activity was the zeolite highest de-aluminated (Si/Al ratio of 3.7). Such performance was attributed on the one hand, to active extra-framework aluminum species hosted in the large cavities of zeolites and, on the other hand to redistribution of lanthanum species into the zeolite as a consequence of de-alumination.     

Thermal Decomposition of Diammonium Tetrachloroplatinate to form Platinum Nanoparticles and its Application as Electrodes

Pt nanoparticles were obtained via the thermal decomposition of (NH₄)₂[PtCl₄] (diammonium tetrachloroplatinate) by heating from room temperature to 760 °C. The thermal decomposition process was analyzed using thermogravimetric analysis (TGA) and differential thermal analysis (DTA), X-ray thermodiffraction and infrared spectroscopy. The size and structure of the platinum particles were analyzed using transmission electron microscopy (TEM). The electrochemical activity of Pt particles was assessed by cyclic voltammetry in 0.5 M H₂SO₄. The TGA and DTA results suggested that the thermal decomposition of the precursor proceeded in two stages: loss of NH₄Cl at ~300 °C, followed by loss of NH₄Cl and Cl₂ at ~372 °C. Metallic Pt particles were then produced at temperatures of 372 °C and above. At 760 °C, the mean ± SD size of the Pt particles was (4.1 ± 1.6) nm, as determined from TEM measurements. In cyclic voltammetry (CV) measurements, an electrode comprised of glassy carbon and Pt particles in 0.5 M H₂SO₄ exhibited behavior similar to that observed using a polycrystalline Pt electrode.     

Adsorption kinetics and thermodynamics of azo-dye Orange II onto highly porous titania aerogel

We report herein a kinetic and thermodynamic study of the adsorption of azo-dye Orange II from aqueous solutions onto titania aerogels. Aerogels structure was confirmed by FTIR and N₂ adsorption revealed their specific surface area (500 m²/g), pore volume (2.86 cm³/g) and pore size (mean 13.9 nm). Adsorption tests were conducted in batch reactors under various conditions where the effect of pH, temperature, contact time, dye concentration, and adsorbent dose were studied. Experiments performed at pH 2 show the optimal adsorption due to the best surface charge interactions. The temperature shows a weak influence with a decrease in the adsorption uptake as the temperature increases. Adsorption kinetics is shown to be very fast and follows a pseudo second-order indicating the coexistence of chemisorption and physisorption with the intra-particle diffusion being the rate controlling step. The experimental data fit perfectly with Sips isotherms and reveal the ability of titania aerogel to adsorb 420 mg of Orange II per gram of adsorbent at the optimal conditions. The thermodynamic study reveals the activation energy (42.1 kJ mol⁻¹) and the changes in Gibbs free energy (1.2 kJ mol⁻¹), enthalpy (−16.4 kJ mol⁻¹), and entropy (−58 J mol⁻¹ K⁻¹). The entire regeneration of the titania aerogel adsorption sites at pH 11 and 30 °C shows a total recovery of the dye and the efficient reusability and the economic interest of these adsorbing materials for environmental purposes.     

Evaluation of flow cell detector configurations combining simultaneous preconcentration and scintillation detection for monitoring of pertechnetate in aqueous media

Flow cell detectors were developed for simultaneous concentration and scintillation detection of technetium-99 in water. Evaluated flow cell geometries consisted of a coil and a fountain flow cell design; the latter is based on radial solution flow through a resin bed interfaced with a photomultiplier tube through a polycarbonate window. The sorptive scintillating media investigated were (1) an extractive scintillator combining a porous polystyrene resin with the extractant Aliquat-336 and fluor 2-(1-naphthyl)-5-phenyloxazole, (2) a mixed bed of organic scintillator (BC-400) and Tc-selective resin (TEVA), and (3) a mixed bed of inorganic scintillator particles (CaF2-Eu) with either TEVA resin or strong base anion-exchange resin (Dowex 1 x 8-400(Cl)). Depending on flow cell geometry and medium, the detection efficiencies for 99Tc ranged from 7.26 (BC-400/TEVA in coil geometry) to 50.20% (CaF2(Eu)/Dowex 1 x 8-400(Cl) in fountain flow cell geometry). The configuration with the highest sensitivity, CaF2(Eu)/Dowex 1 x 8-400(Cl) in coil geometry, can detect 99Tc as low as 3.78 Bq L(-1) for a 100-s count interval and a 200-mL sample, which is below the current regulatory level of 33 Bq L(-1). The issue of sensor reusability was addressed in this research, and its potential application at near neutral pH was demonstrated. The optimal sensor design was evaluated with a 99Tc-spiked synthetic groundwater matrix.     

Carrier Frequency Offset Estimation using Data-Dependent Superimposed Training

In this letter we propose, for the first time, a solution to the problem of carrier frequency offset (CFO) estimation within the data dependent superimposed training (DDST) framework for channel estimation. While time division multiplexed (TDM) trained systems can use the TDM sequence to determine the CFO, the original attraction of DDST for channel estimation was that it avoided any TDM training. So in this letter we show how CFO estimation can still be very effectively performed with the DDST algorithm, while continuing to preclude the need for any additional bandwidth-consuming TDM training. Finally, simulations are presented that verify the theoretical results.     

Exodontia‐induced muscular hypofunction by itself or associated to chronic stress impairs masseter muscle morphology and its mitochondrial function

Stress is associated with orofacial pain sensitivity and is qualified as a temporomandibular disorder risk factor. During stressful periods, painful thresholds of masticatory muscles in individuals suffering muscle facial pain are significantly lower than in controls, but the exact physiologic mechanism underlying this relation remains unclear. Our hypothesis is that chronic unpredictable stress and masticatory hypofunction induce morphologic and metabolic masseter muscle changes in rats. For test this hypothesis, adult Wistar rats were submitted to chronic unpredictable stress and/or exodontia of left molars and the left masseter muscle was removed for analysis. The parameters evaluated included ultrastructure, oxidative level, metabolism activity and morphological analysis in this muscle. Our data show by histological analysis, that stress and exodontia promoted a variation on diameters and also angled contours in masseter fibers. The masticatory hypofunction increased oxidative metabolism as well as decreased reactive species of oxygen in masseter muscle. The ultrastructural analysis of muscle fibers showed disruption of the sarcoplasmic reticulum cisterns in certain regions of the fiber in stress group, and the disappearance of the sarcoplasmic reticulum membrane in group with association of stress and exodontia. Our findings clarify mechanisms by which chronic stress and masticatory hypofunction might be involved in the pathophysiology of muscular dysfunctions. Masticatory hypofunction influenced oxidative stress and induced oxidative metabolism on masseter muscle, as well as altered its fiber morphology. Chronic stress presented malefic effect on masseter morphology at micro and ultra structurally. When both stimuli were applied, there were atrophic fibers and a complete mitochondrial derangement.     

Core–Shell Polymer Adhesive for Aluminized Coatings: From Improved Barrier Properties to Commercial Formulation

The development and formulation of core–shell latex‐based adhesives to improve the adhesion of aluminium to poly(ethylene terephthalate) (PET) films and enhance the permeability of the final laminate to oxygen and water is described. All particles have a soft acrylic component (the shell in core–shell particles) to improve adhesion, and occasionally a hydrophobic core to enhance the permeability. The performance of the different latexes is compared to that of a commercially available reference material. The coatings formed by core–shell nanoparticles present a lower permeability to water than the particles synthesized in the absence of the seed, while the permeability to oxygen is found to be mainly related to the correct deposition of the metallic layer. In terms of the industrial formulation, it is found that a limited amount of a wetting agent (WA) is needed to ensure the correct spreading of the latex onto the PET substrate because of the low levels of surfactant used for the latex production. This compound has a positive effect on the adhesive strength of the coating. A curing agent also improves barrier properties, but the optimal level of this compound is dependent on the degree of crosslinker used in the base latex.     

Material‐Auswahlbox zur Herstellung fortgeschrittener Polymermembranen für die Wasseraufbereitung

Within the framework of the MABMEM research project, new high‐performance membranes are being developed for sustainable water management. The performance of the membranes will be evaluated in comparative and standardized fouling tests as well as in terms of the removal of trace impurities on a laboratory scale. Seven candidates are currently being tested in demonstrator trials with real‐water matrix in a waterworks for the direct treatment of dam water without prior coagulation over a period of 6 months. Subsequently, the new membrane materials will be operated with the effluent of a wastewater treatment plant.