Optimization and evaluation of reduced graphene oxide hydrogel composite as a demulsifier for heavy crude oil-in-water emulsion

The rising production of produced water from oilfields had been proven to bring detrimental environmental effects. In this study, an efficient, recyclable, and environmental-friendly reduced graphene oxide immobilized κ-Carrageenan hydrogel composite(κCa GO) was fabricated as an alternative sorbent for crude oil-in-water demulsification. Polyethyleneimine(PEI) was employed to form a stable hydrogel composite. The conditions for the immobilization of graphene oxide(GO) on PEI-modified κ-Carrageenan(κC) beads were optimized appropriately. An immobilization yield of 77% was attained at 2% PEI, 2 h immobilization activation time, and p H6.5. Moreover, the synthesized κCa GO is capable of demulsification with an average demulsification efficiency of 70%. It was found that the demulsification efficiency increases with salinity and κCa GO dosage, and it deteriorates under alkaline condition. These phenomena can be attributed to the interfacial interactions between κCa GO and the emulsion. Furthermore, the κCa GO can be recycled to use for up to six cycles without significant leaching and degradation. As such, the synthesized κCa GO could be further developed as a potential sorbent substitute for the separation of crude oil from produced water.     

An Engineered sgsh Mutant Zebrafish Recapitulates Molecular and Behavioural Pathobiology of Sanfilippo Syndrome A/MPS IIIA

Mucopolysaccharidosis IIIA (MPS IIIA, Sanfilippo syndrome type A), a paediatric neurological lysosomal storage disease, is caused by impaired function of the enzyme N-sulfoglucosamine sulfohydrolase (SGSH) resulting in impaired catabolism of heparan sulfate glycosaminoglycan (HS GAG) and its accumulation in tissues. MPS IIIA represents a significant proportion of childhood dementias. This condition generally leads to patient death in the teenage years, yet no effective therapy exists for MPS IIIA and a complete understanding of the mechanisms of MPS IIIA pathogenesis is lacking. Here, we employ targeted CRISPR/Cas9 mutagenesis to generate a model of MPS IIIA in the zebrafish, a model organism with strong genetic tractability and amenity for high-throughput screening. The sgsh^Δex5−6 zebrafish mutant exhibits a complete absence of Sgsh enzymatic activity, leading to progressive accumulation of HS degradation products with age. sgsh^Δex5−6 zebrafish faithfully recapitulate diverse CNS-specific features of MPS IIIA, including neuronal lysosomal overabundance, complex behavioural phenotypes, and profound, lifelong neuroinflammation. We further demonstrate that neuroinflammation in sgsh^Δex5−6 zebrafish is largely dependent on interleukin-1β and can be attenuated via the pharmacological inhibition of Caspase-1, which partially rescues behavioural abnormalities in sgsh^Δex5−6 mutant larvae in a context-dependent manner. We expect the sgsh^Δex5−6 zebrafish mutant to be a valuable resource in gaining a better understanding of MPS IIIA pathobiology towards the development of timely and effective therapeutic interventions.     

Finite-element simulation of induction heat treatment

An efficient finite-element procedure has been developed for the analysis of induction heat treatment problems involving nonisothermal phase changes. The finite-element procedure first simulates the magnetic field developed when currents flow through an induction coil by solving Maxwell’s electromagnetic field equations; at the following step, it calculates the temperature distribution in the workpiece due to eddy currents induced by the magnetic field. The final stage of the simulation involves the determination of the distributions of residual stress, hardness, and microstructure in the workpiece. The finite-element analysis includes temperature-dependent material properties, changes in permeability of the workpiece at the Curie temperature, a mixed hardening rule to describe the material constitutive model, and the incorporation of time-temperature-transformation (TTT) diagram. The procedure was applied to the simulation of the induction hardening of 1080 steel bar. Firstly, the magnetic field and temperatures developed in the workpiece during (a) the induction heating of an infinitely long 1080 steel cylinder by a single encircling coil and (b) the induction heating of a semi-infinite half-space by a single coil suspended above it were calculated using the finite-element procedures. These were validated by comparing them with analytical solutions derived for these configurations using a Green’s function method. Finally, to demonstrate the predictive capability and practical applicability of the current finite-element procedure, two examples pertaining to the induction heat treatment of an infinite 1080 steel bar of square cross section and a notched finite 1080 steel cylinder of circular cross section were analyzed to predict the magnetic field, temperature, and residual stress distributions. The current finite-element procedure could be used as a powerful design tool for linking induction heat treating parameters with the mechanical property attributes of the heat treated component.     

The mechanical property and phase structures of wheat proteins/polyvinyl alcohol blends studied by high-resolution solid-state NMR

The phase structures of thermally processed wheat proteins (WP) and polyvinyl alcohol (PVOH) blends were studied by solid-state high-resolution NMR spectroscopy. The intermolecular interactions among the multi-component systems and the behavior of each component in the blends on scales of nanometers were examined. The mechanical properties of the blends were also measured and related to the phase structure studies. The results indicated that the polymer chains of WP could be homogeneously mobilized when thermally processed with glycerol and water as plasticisers, but the glycerol predominately associated with WP rather than PVOH in the blends. The intermolecular hydrogen bonding interactions between WP and PVOH caused some extent of miscibility in the system on scales of nanometers especially when the PVOH content was low. The tensile strength and modulus of the blends were improved as compared to WP. However, the intermolecular interactions were relatively weak and could not be further enhanced by increasing PVOH component in the blends. The particle miscible WP/PVOH blends contained plasticised WP and PVOH phases in conjunction with the miscible WP/PVOH phase. Increasing the PVOH content in the blends did not result in an increase of the percentage of the miscible phase and the blends tented to be immiscible while the elongation of the blends was reduced when increasing the PVOH content in the blends.     

High Throughput Screening of Low Temperature SCR and SCD De-NOx Catalysts in Scanning Mass Spectrometer

High-throughput synthesis and screening methods have been developed for the discovery of highly active lead compounds for the selective catalytic reduction as well as direct decomposition of NO in the temperature range 200–300 °C. The discovery libraries for primary screening consisted of 16 × 16 catalyst arrays on 4in. square quartz wafers. Catalysts were prepared by robotic liquid dispensing techniques and screened for catalytic activity in Symyx' scanning mass spectrometer. The scanning mass spectrometer is a fast serial screening tool that uses flat wafer catalyst surfaces, local laser heating, a scanning/sniffing nozzle and a quadrupolar mass spectrometer to compare relative catalytic activities. The feed consisted of NO/NH₃ mixtures with optional O₂ cofeed and Kr as the internal standard in Ar carrier gas. QMS detection allowed for tracking of H₂O, N₂, NO, O₂, N₂O and Kr. Screening protocols for catalytic materials encompassed metal precursors and carriers for supported vanadia systems, extensive doping of V₂O₅/TiO₂, and broad screening of mixed redox metal oxides and supported base and noble metal systems. More than 500 samples could be screened in a single day. Active hits (high NO consumption accompanied by corresponding N₂ production) identified in discovery libraries were re-synthesized as focus libraries for lead confirmation and further optimization. These libraries used shallower compositional gradients, for example 56 points (compositions) per ternary, with four 56-point ternaries per 4in. wafer. Broad screening ternaries were generally 8 or 15 points. The focus libraries more clearly reveal the trends and provide guidelines for secondary screening and scale-up. High conversions were achieved in scanning mass spectrometer so the scalability risk is small for the short contact time reactions.     

Effect of early postnatal dietary sterculate on the fatty acid composition of rat liver and brain lipids

Pregnant rats were fed a high carbohydrate diet containing either 1% trilinolein or 1% trilinolein with 0.2% methyl sterculate from 18 day gestation to 21 day postpartum. The pups were weaned at 21 days and continued on the same diet for an additional 10 days. The microsomal stearyl CoA desaturase activities of the liver were effectively inhibited. Liver triglycerides showed increases in the saturated fatty acids concentrations at the expense of the corresponding monoenes. The concentration ofcis 6–7 octadecenoic acid was elevated. In liver phospholipids, the concentration of stearic acid was increased without a corresponding decrease in the oleic acid content. A drastic decrease in the nervonic acid (24∶1, n−9) concentration of liver sphingomyelin was observed. The lipids of the brain did not contain sterculic acid, and brain desaturase activity was unaffected. There was no significant change in the concentration of monoenoic acids from 16∶1 to 22∶1. However, nervonic acid was decreased by 32%. These results suggest that brain nervonic acid may be derived from a precursor other than oleic acid.     

Lipid hydrolysis and oxidation on the surface of milled rice

The changes in milled rice FFA content and composition and in conjugated diene (CD) content and bacterial, yeast, and mold counts were determined at 24, 37, and 50°C and 70% RH over 50 d. There was a rapid rate of FFA formation during the first few days of storage, which was optimal at 37°C, but that slowed after 2, 4, and 5 d at 37, 24, and 50°C, respectively. There was a second increase in FFA after about day 12 that increased with increasing temperature, indicating nonlipase hydrolysis. Linoleic and oleic acids were the main components of the total FFA produced on the surface of milled rice. The pattern of CD development followed that of FFA increase. Bacterial growth correlated with increased FFA levels after 12 d of storage, suggesting that bacterial lipase rather than bran lipase may be responsible for rice lipid hydrolysis     

ON GENERALIZED FRACTIONAL PROCESSES

Abstract. A class of stationary long-memory processes is proposed which is an extension of the fractional autoregressive moving-average (FARMA) model. The FARMA model is limited by the fact that it does not allow data with persistent cyclic (or seasonal) behavior to be considered. Our extension, which includes the FARMA model as a special case, makes use of the properties of the generating function of the Gegenbauer polynomials, and we refer to these models as Gegenbauer autoregressive moving-average (GARMA) models. While the FARMA model has a peak in the spectrum at f = 0, the GARMA process can model long-term periodic behavior for any frequency 0 f 0.5. Properties of the GARMA process are examined and techniques for generation of realizations, model identification and parameter estimation are proposed. The use of the GARMA model is illustrated through simulated examples as well as with classical sunspot data.     

Microenvironmental engineering: An effective strategy for tailoring enzymatic activities

Rationally, engineering a favorable physicochemical microenvironment for enzymes has recently emerged as an effective strategy to improve their catalytic performance. In this review, we discuss four microenvironmental effects according to the mechanism of action: localizing and excluding reactants and regulators, regulating microenvironmental pH, creating a water-like microenvironment, and increasing the local temperature. These mechanisms are enzyme-independent and can in principle be used in combination to tailor enzyme behaviors, offering new approaches to enabling, enhancing, and regulating enzyme catalysis in diverse applications without the need for genetic engineering.     

Stereospecific synthesis ofcis andtrans fatty esters

Theerythro andthreo isomers of methyl 9,10-dihydroxyoctadecanoate and thethreo isomer of methyl 12,13-dihydroxy-cis-9-octadecenoate were converted into methylcis- andtrans-9-octadecenoate and methylcis-9,rans-12-octadecadienoate, respectively, by reaction of the dihydroxy ester with triethyl orthoformate to give the 2-ethoxy-1,3-dioxolane which was thermally decomposed to the unsaturated ester.