H_5N_1亚型禽流感病毒血凝素基因的克隆及分子进化分析

目的　克隆H5N1 亚型禽流感病毒HA基因并进行分子进化分析。方法　应用RT PCR方法 ,以 2株H5N1 亚型禽流感病毒RNA为模板 ,扩增了HA全基因cDNA。将HAcDNA基因克隆于pUCm T载体 ,并对其进行了测序。结果　所克隆的HA基因全长为 1731bp ,共编码 5 6 8个氨基酸。将该毒株与其它 10株H5亚型禽流感病毒HA基因序列核苷酸及氨基酸进行比较 ,其核苷酸同源性在 80 5 %～ 99 2 %之间 ,氨基酸序列同源性在 89 4 %～98 6 %之间。高致病性毒株HA基因裂解位点存在多个碱性氨基酸插入。结论　为禽流感基因工程疫苗的研制奠定了基础 ,同时通过分子进化分析也揭示了各毒株间的亲缘关系。     

Method for characterization of triacylglycerols and fat-soluble vitamins in edible oils and fats by supercritical fluid chromatography

This study demonstrates the usefulness of capillary supercritical fluid chromatography (SFC) for the characterization of triacylglycerols of edible oils and fats. Triacylglycerols were separated according to the acyl carbon number and the degree of unsaturation on a 25% cyanopropyl/25% phenyl/50% methylpolysiloxane stationary phase. Valuable information concerning the triacylglycerol composition of berry oils was obtained, despite the overlapping of certain triacylglycerol peaks. Simultaneous analysis of fat-soluble vitamins and triacylglycerols is not practical by capillary SFC with flame-ionization detection because of the low concentration of naturally-occurring fat-soluble vitamins in edible oils. Therefore, higher loading of the sample, which led to overloading of triacylglycerols, was required to get reasonable peaks for fat-soluble vitamins. The method was applied to the characterization of triacylglycerols and tocopherols in sea buckthorn pulp and seed oil, and cloudberry seed oil without any sample purification prior to SFC. In addition, the stationary phase proved useful for separating the more complex mixtures of triacylglycerols found in milk fat and in fish oil.     

Activity and Selectivity of a Nanostructured CuO/ZrO2 Catalyst in the Steam Reforming of Methanol

Steam reforming of methanol for production of hydrogen can be carried out over copper based catalyst. In the work presented here, the catalytic properties of a CuO/ZrO₂ catalyst (8.5wt%) synthesised by a templating technique were investigated with respect to activity, long term stability, CO formation, and response to oxygen addition to the feed. The results were obtained using a fixed bed reactor and compared to a commercial methanol synthesis catalyst CuO/ZnO/Al₂O₃. It is shown that, depending on the time on stream, the temporary addition of oxygen to the feed has a beneficial effect on the activity of the CuO/ZrO₂ catalyst. After activation, the CuO/ZrO₂ catalyst is found to be more active (per copper mass) than the CuO/ZnO/Al₂O₃ system, more stable during time on stream (measured up to 250h), and to produce less CO. Structural characterisation by means of X-ray powder diffraction (XRD) and X-ray absorption spectroscopy (XAS) reveals that the catalyst (as prepared) consists of crystalline, tetragonal zirconia with small domain sizes (about 60Å) and small/disordered crystallites of CuO.     

Electrolytical fission at mercury cathodes of an NO single bond in ethers derived from 1-hydroxybenzo(d)-1,2,3-triazoles

The single NO bond in various ethers derived from 1-hydroxybenzo(d)-1,2,3-triazoles is reduced at mercury cathodes in a 2-electron process giving rise to the non-substituted benzotriazole and a corresponding primary alcohol. Controlled-potential electrolysis actually resulted in isolating the products of the above type eg benzotriazole and 2-piperidinoethanol. Cathodic reduction of non-substituted benzotriazole in acid media proceeds evidently via a chemical reaction between benzotriazole and hydrogen obtained by the catalytic reduction of hydrogen ions at the mercury electrode.     

The influence of potential on the anodic dissolution of SIMFUEL (UO2)

The influence of potential on the anodic dissolution of SIMFUEL (doped uranium dioxide) has been characterized over the range 0-500 mV (versus SCE). Cathodic stripping voltammetry was used to determine the changes in surface reactivity of UO₂ in neutral solutions after different anodic oxidation timescales. Scanning electron microscopy (SEM) was used to view the damage to the SIMFUEL electrode surface which was minimal at E < 200 mV but present as local pits and eroded grains after oxidation at higher potentials. Long-term anodic oxidation at potentials below 200 mV suggests that local acidification can develop within surface asperities in the fuel and pores in corrosion product deposits accumulated on the electrode surface.     

Factors influencing encapsulation behavior in composite droplet-type polymer blends

In this study the influence of the molecular weight of the dispersed phase components on encapsulation effects in the composite droplet phase was examined for high density polyethylene (HDPE)/PS/PMMA ternary blends. Three different blends composed of various PS and PMMA materials dispersed in an HDPE matrix were prepared using an internal mixer. The morphology was studied by light and electron microscopy. Current models used for predicting encapsulation effects and composite droplet formation in ternary systems (based on static interfacial tension) predict in all cases that PS will encapsulate the PMMA. However, in one case, an unexpected encapsulation of PS by PMMA was observed. It was found that arguments based on the effect of viscosity ratio or the absolute viscosity of the different dispersed phases do not explain that discrepancy. In addition, the reversal of that latter composite droplet morphology from PMMA encapsulating PS to PS encapsulating PMMA was observed upon annealing treatment. Considering all the above, a conceptual model was developed to predict encapsulation effects in composite droplet type systems based on the use of a dynamic interfacial tension (i.e. taking into account the elasticity of the polymer components). Calculations based on the dynamic interfacial tension model, using elasticities based on constant shear stress, were able to account for all of the observed encapsulation effects in this study.     

Hydrogenation of Citral Over a Polymer Fibre Catalyst

A polymer-supported Pd catalyst was investigated in hydrogenation of citral (3,7-dimethyl-2,6-octadienal), which is a stereoisomer with an isolated and a conjugated double bond as well as a carbonyl group. The catalyst was a fibrous polymer-supported catalyst modified with functional groups and immobilized metals. A comparison of the polymer-supported catalyst with conventional catalysts was made.     

Influence of grafted polypropylene on the mechanical properties of mineral‐filled polypropylene composites

The purpose of this work was to study how mineral fillers would behave in a polypropylene (PP) matrix when PP modified with maleic anhydride (MA) and/or itaconic acid (IA) was used as a coupling agent in the preparation of mineral‐filled PP composites. The composites were characterized with tensile mechanical measurements and morphological analysis. The optimum amount of the coupling agent to be used to obtain composites with improved mechanical properties was established. The results indicated that these coupling agents enhanced the tensile strength of the composites significantly, and the extent of the coupling effect depended on the nature of the interface that formed. The incorporation of coupling agents enhanced the resistance to deformation of the composite. The behavior of IA‐modified PP as a coupling agent was similar to that of a commercial MA‐modified PP for the filled PP composites. Evidence of improved interfacial bonding was revealed by scanning electron microscopy studies, which examined the surfaces of fractured tensile test specimens; their microstructures confirmed the mechanical results with respect to the observed homogeneous or optimized dispersion of the mineral‐filler phase in these composites. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 103: 2343–2350, 2007     

Synthesis of copolymers of tert‐butyl vinyl ether with maleic and citraconic anhydrides

In the present study, the effects of charge‐transfer complex formation and intramolecular fragmentation (side‐chain lactonization) in radical copolymerization of tert‐butyl vinyl ether (t‐BVE) with anhydrides of maleic (MA) and citraconic (CA) acids and the structure–thermal behavior relationships of the resulting copolymers were examined using the ¹H‐NMR, FTIR, DSC, and TGA analysis methods. It was shown that copolymerization under the chosen conditions proceeded through intramolecular fragmentation with the formation of γ‐lactone units. Side‐chain fragmentation of t‐BVE–MA and t‐BVE–CA copolymers also was confirmed by TGA and DSC analysis. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 100: 2455–2463, 2006 2006     

Induction of DNA-double-strand breaks by auger electrons from 99mTc complexes with DNA-binding ligands

The potential of certain Auger electron emitting nuclides for systemic radiotherapeutic applications has recently gained much attention. In particular, the ability of several nuclides, including 111In, 125I, and 123I, to induce DNA double-strand breaks (dsb), a good indicator of cytotoxicity, has been extensively studied. However, this ability has never previously been shown experimentally for 99mTc, which, besides the well-known gamma radiation that is used for diagnostic applications, also emits an average of 1.1 conversion electrons and 4 Auger or Coster-Kronig electrons per decay. Owing to the short range of Auger electrons, the radionuclide needs to be located very close to the DNA for dsb to occur. We synthesized two cationic 99mTcI-tricarbonyl complexes with pendant DNA binders, pyrene and anthraquinone. The X-ray crystal structures of the two complexes could be elucidated. Linear dichroism and UV/Vis spectroscopy revealed that the complex with pyrene intercalates DNA with a stability constant, K, of 1.1 x 10(6) M(-1), while the analogous complex with anthraquinone interacts with DNA in a groove-binding mode and has an affinity value of K=8.9 x 10(4) M(-1). We showed with phiX174 double-stranded DNA that the corresponding 99mTc complexes induce a significant amount of dsb, whereas non-DNA-binding [TcO4]- and nonradioactive Re compounds did not. These results indicate that the Auger electron emitter 99mTc can induce dsb in DNA when decaying in its direct vicinity and this implies potential for systemic radiotherapy with 99mTc complexes.