Leaching of a copper flotation concentrate with ammonium persulfate in an autoclave system

The leaching behavior of a copper flotation concentrate was investigated using ammonium persulfate （APS） in an autoclave systee. The decomposition products of APS, active oxygen, and acidic medium were used to extract metals from the concentrate. Leaching experiments were performed to compare the availability of APS as an oxidizing agent for leaching of the concentrate under atmospheric conditions and in an autoclave system. Leaching temperature and APS concentration were found to be important parameters in both leaching systems. Atmospheric leaching studies showed that the metal extractions increased with the increase in APS concentration and temperature （up to 333 K）. A similar tendency was determined in the autoclave studies up to 423 K. It was also determined that the metal extractions decreased at temperatures above 423 K due to the passivation of the particle surface by molten elemental sulfur. The results showed that higher copper extractions could be achieved using an autoclave system.     

Mechanical and viscoelastic properties of polyethylene-based microfibrillated composites from 100% recycled resources

In this study, recycled polyethylene (rPE) based microfibrillated composites (MFCs) were developed while incorporating recycled poly(ethylene terephthalate) (rPET) and recycled polyamide 6 (rPA) as the reinforcing fibrillar phases at a given weight ratio of 80 wt% (rPE)/20 wt% (rPET or rPA). The blends were first melt processed using a twin-screw extruder. The extrudates were then cold stretched at a drawing ratio of 2.5 to form rPET and rPA fibrillar structures. Next, the pelletized drawn samples were injection molded at the barrel temperatures below the melting temperatures of rPET and rPA. The tensile, three-point bending, impact strength, dynamic thermomechanical, and rheological properties of the fabricated MFCs were analyzed. The effects of injection molding barrel temperature (i.e., 150°C and 190°C) and extrusion melt processing temperature (i.e., 250°C and 275°C) on the generated fibrillar structure and the resultant properties were explored. A strong correlation between the fibrillar morphology and the mechanical properties with the extrusion and injection molding temperatures was observed. Moreover, the ethylene/n-butyl acrylate/glycidyl methacrylate (EnBAGMA) terpolymer and maleic anhydride grafted PE (MAH-g-PE) were, respectively, melt processed with rPE/rPET and rPE/rPA6 blends as compatibilizers. The compatibilizers refined the fibrillar structure and remarkably influenced mechanical properties, specifically the impact strength.     

Thermocapillary Flow and Coalescences of Heterogeneous Bubble Size Diameter in a Rotating Cylinder: 3D Study

Two dimensional axisymmetric and three-dimensional VOF simulations of gas/liquid transient flow were performed using a multiphase flow algorithm based on the finite-volume method. The results for motion of a multiple bubbles of a heterogeneous sizes aligned horizontally and perpendicular to a hot surface incorporating thermocapillary forces in a rotating liquid in a zero-gravity environment have been presented for the first time. No bubbles broke in any of the cases observed. The results also show that collision and agglomeration of bubbles of unequal sizes diameter are different from those of similar size diameters presented from earlier research work of Alhendal et al. Acta Astronaut. 117, 484–496 (2015). Different flow patterns such as thermocapillary bubble migration, collision, and stream function were observed and presented for the 2-D and 3-D models.     

Online tax payment systems as an emergent aspect of governmental transformation

The achievement of governmental transformation through the use of electronically delivered services is a worthy goal that requires significant planning and research to achieve. In order to reach transformational paradigm shifts in governmental operation, it will first be necessary to understand and optimize present governmental e-Service provisions. Of these, the revenue function of taxation is paramount. This paper describes factors related to the use and acceptance by accounting professionals of information technology intended to facilitate electronic tax filing systems. Though tested in the context of governmental tax management systems in Turkey, our findings on the use and acceptance of e-Tax systems are relevant and applicable to a great number of nations and contexts as the ongoing electronic transformation of the governmental revenue system contributes to efforts to transform governments through alternative services delivery venues and channels. We discover that intention to use automated systems as part of the governmental treasury function transformation is hindered by factors that mediate actual plans to do so, mostly in terms of normative pressures and perceptions of behavioral control, which training and education may well ameliorate. Hence, transformation of the treasury function in Turkey is only partially complete and will require additional support, direction and training on the part of the government in its interactions with the tax professionals who interact with the emergent automated system.     

A fuzzy long-term investment planning model for a GenCo in a hybrid electricity market considering climate change impacts

We study the long-term generation capacity investment problem of an independent power generation company (GenCo) that functions in an environment where GenCos perform business with both bilateral contracts (BC) and transactions in the day-ahead market (DAM). A fuzzy mixed integer linear programming model with a fuzzy objective and fuzzy constraints is developed to incorporate the impacts of imprecision/uncertainty in the economic environment on the calculation of the optimal value of the GenCo’s objective function. In formulating the fuzzy objective function we also include the potential impacts of climate change on the energy output of hydroelectric power plants. In addition to formulating and solving the capacity planning/investment problem, we also performed scenario-based (sensitivity) analysis to explore how investment decisions of the GenCos change when fuzziness (tolerance) in the maximum energy output of hydroelectric units and/or drought expectation increases. The proposed model is novel and investigates the effects of factors like drought expectations of climate changes, hydroelectric power plant investments, and other power generation technology investment options.     

An Analytical Approach to the Concept of Counter-UA Operations (CUAOPS)

Unmanned Aircraft (UA) have become an integral part of the present-day joint air operations. UA have potential to be employed across the full spectrum of Air Force functions. On the other hand, UA technology could be a subject of an asymmetric use by state actors in high or low density conflict, and/or by non-state actors in many ways including terrorism, drug smuggling, and limited attack with unconventional payloads i.e. biological or chemical agents. Therefore countering the threat associated with the hostile UA use could be necessary in the future. First part of the research revealed that UA can be a threat in the future. In the second part of the research, the SWOT (Strengths-Weaknesses-Opportunities-Threats) analysis supplemented with the Tree analysis (SWOT+Tree) provided a broader look for investigating the factors related to hostile UA use analytically. In literature, there is little information about the concepts for CUAOPS. The final goal of the paper is to find possible solutions and means for a better understanding of the nature of CUAOPS.     

The hydro-abrasive erosion wear behavior of duplex-treated surfaces of AISI H13 tool steel

The influence of duplex surface treatments consisting of a DC-pulsed plasma nitriding process and subsequent coatings of CrN and TiAlN deposited by physical vapor deposition(PVD)on AISI H13 tool steel was studied in this article.The treated samples were characterized using metallographic techniques,SEM,EDS,and microhardness methods.Hydro-abrasive erosion wear tests were performed in a specifically designed wear tester in which the samples were rotated in a wear tank containing a mixture of distilled water and ceramic abrasive chips with a fixed rotational speed.The wear rates caused by the abrasive particle impacts were assessed based on accumulated weight loss measurements.The worn surfaces were also characterized using optical microscopy,SEM,and EDS.Microhardness measurements indicated a significant increase in the surface hardness of the duplex-treated samples.The surfaces of the samples with the TiAlN coating were approximately 15 times harder than that of the untreated samples and 3 times that of the plasma nitrided samples.Hydro-abrasive erosion wear results showed that the duplex surface treatments,especially the CrN coating,displayed the highest erosion wear resistance.     

High-Modulus Columns for Liquefaction Mitigation

This paper presents the performance of a shopping complex in Turkey where the soils were improved with jet-grout columns and preload fills and subjected to the 1999 Kocaeli Earthquake (M = 7.4). Under construction at the time of the earthquake, the Carrefour Shopping Center covers an area of 55,000?m2 and is founded on shallow footings, mats, and slabs-on-grade that rest on soft, saturated alluvial sediments consisting of clays, silts, and sands. High-modulus columns constructed by jet grouting were installed at close-to-moderate spacings to reduce anticipated static settlements in the clays and mitigate liquefaction in the sands. The site was subjected to a peak acceleration of approximately 0.2g during the earthquake. Grouting had been completed for about two-thirds of the site when the earthquake struck. Following the event, a field reconnaissance found stark contrast between the performance of the improved and unimproved sections. The jet-grout-treated areas suffered no apparent damage, whereas the unimproved sections of the complex, along with nearby untreated building sites, commonly suffered liquefaction-related settlements of up to 10 cm. This is the only case history known to the authors that documents the field performance of high-modulus columns used in this manner for liquefaction mitigation and direct instrumented measurement of liquefaction-induced settlements.     

Performance evaluation of a submerged membrane bioreactor for the treatment of brackish oil and natural gas field produced water

Produced water, which is co-produced during oil and gas manufacturing, represents one of the largest sources of oily wastewaters. Therefore, treatment of this produced water may improve the economic viability and lead to a new source of water for beneficial use. In this study a submerged hollow fiber membrane bioreactor (MBR) has been studied experimentally for the treatment of brackish oil and natural gas field produced water. This type of wastewater is also characterized with relatively moderate to high amount of salt, oil and total petroleum hydrocarbons (TPH). However, the bacteria which are growing in conventional activated sludge and MBR cannot survive at these strict conditions, therefore acclimation of the bacteria is of vital importance. The performance of the biological system, membrane permeability, the rate and extent of TPH biodegradability have been investigated under different sludge age and F/M ratios. The results obtained by gas chromatography analyses showed that the MBR system could be very effective in the removal of TPH from produced water and a significant improvement in the effluent quality was achieved.     

Extending the information delivery manual approach to identify information requirements for performance analysis of HVAC systems

Heating, Ventilation and Air-Conditioning (HVAC) systems account for more than 15% of the total energy consumption in the US. In order to improve the energy efficiency of HVAC systems, researchers have developed hundreds of algorithms to automatically analyze their performance. However, the complex information, such as configurations of HVAC systems, layouts and materials of building elements and dynamic data from the control systems, required by these algorithms inhibits the process of deploying them in real-world facilities. To address this challenge, we envision a framework that automatically integrates the required information items and provides them to the performance analysis algorithms for HVAC systems. This paper presents an approach to identify and document the information requirements from the publications that describe these algorithms. We extend the Information Delivery Manual (IDM) approach so that the identified information requirements can be mapped to multiple information sources that use various formats and schemas. This paper presents the extensions to the IDM approach and the results of using it to identify information requirements for performance analysis algorithms of HVAC systems.