Extruded meat alternatives made from Maillard-reacted beef bone hydrolysate and plant proteins: part I – Effect of moisture content

This study investigated the effects of moisture content (MC) on the physicochemical properties of extruded meat alternatives made from Maillard-reacted beef bone hydrolysate and plant proteins. Samples were extruded at 170 °C (maximum barrel temperature), at 3.6 kg h⁻¹ (liquid feed rate) and at 1.8, 2.2, 2.6 and 3.0 kg h⁻¹ (dry feed rates) to obtain MC of 60%MC, 56%MC, 52%MC and 49%MC, respectively. Meat alternatives at 52%MC showed the greatest degree of texturisation. However, meat alternatives at 49%MC were the closest in terms of both textural and microstructural properties to reference sample, boiled chicken breast. Results from protein solubility suggested that a large amount of aggregated proteins were associated with hydrogen bonds, while disulphide bonds were the main contributor in the formation of fibrous structure in meat alternatives. Results showed that the change in MC as process parameter played an important role in the formation of fibrous structure in extruded meat alternatives.     

Molecular Heterojunctions of Oligo(phenylene ethynylene)s with Linear to Cruciform Framework

Electrical transport properties of molecular junctions are fundamentally affected by the energy alignment between molecular frontier orbitals (highest occupied molecular orbital (HOMO) or lowest unoccupied molecular orbital (LUMO)) and Fermi level (or work function) of electrode metals. Dithiafulvene (DTF) is used as substituent group to the oligo(phenylene ethynylene) (OPE) molecular wires and different molecular structures based on OPE3 backbone (with linear to cruciform framework) are achieved, with viable molecular orbitals and HOMO–LUMO energy gaps. OPE3, OPE3–DTF, and OPE3–tetrathiafulvalene (TTF) can form good self‐assembled monolayers (SAMs) on Au substrates. Molecular heterojunctions based on these SAMs are investigated using conducting probe–atomic force microscopy with different tips (Ag, Au, and Pt) and Fermi levels. The calibrated conductance values follow the sequence OPE3–TTF > OPE3–DTF > OPE3 irrespective of the tip metal. Rectification properties (or diode behavior) are observed in case of the Ag tip for which the work function is furthest from the HOMO levels of the OPE3s. Quantum chemical calculations of the transmission qualitatively agree with the experimental data and reproduce the substituent effect of DTF. Zero‐bias conductance, and symmetric or asymmetric couplings to the electrodes are investigated. The results indicate that improved fidelity of molecular transport measurements may be achieved by systematic studies of homologues series of molecular wires applying several different metal electrodes.     

Community energy planning in Canada: The role of renewable energy

An emerging trend in Canada is the creation of community energy plans, where decisions that used to be left to regional level energy agencies or private individuals are now being considered at the community level. A desire to reduce greenhouse gas emissions and to become more energy self-sufficient is driving this change. Theoretically, local level management is desirable because it achieves these goals through improvements in the three areas of energy efficiency, energy conservation and switching to renewable energy sources. The analysis of 10 of the first community energy plans in Canadian communities, ranging in population size from 500 to one million, finds that communities are choosing policies and programs centred on increasing energy efficiency and conservation while renewable energy receives much less attention. Municipal operations were called upon to set higher targets than the general community. Communities that recognized the substantial potential of renewable energy often focused on technologies that the municipal sector could implement, such as bio-fuels for their transportation fleet. Wind, passive solar design, solar photovoltaics and solar thermal options were only recommended in a few cases. Overall, only one of the five larger communities (Calgary) recommended implementing multiple renewable energy technologies while three of the five smaller communities proposed multiple renewable energy sources. The implication is that smaller and more remote communities may be the most willing to lead in the planned introduction of renewable energy systems.     

Uniaxial compression of dense granular materials: Stress distribution and permeability

A uniaxial compression apparatus designed to investigate the dynamics of proppant particle packing is described. This dynamic compression device (DCD) uses a small charge of particles, approximately 3.5–7 cm³ depending upon the configuration of an experiment. The DCD allows simultaneous measurement of boundary stresses on the packing and permeability of the packing to fluid flow. Visualization of the packing at compressive stress levels up to σ_A = 7100 psi (49 MPa) is also demonstrated. The stresses measured are the normal stress at both walls on the axis of compression, with their difference providing a measure of the shear (or friction) force from the walls, and the transverse normal stress on one orthogonal axis, σ_T. Permeability may be determined by either a fixed pressure drop or fixed flow rate experiment, with results presented from the fixed pressure drop approach by imposing a small gravity head of the flowing liquid; liquid flow is gravimetrically measured.The behaviors of packings of hard particles, both uncoated and when coated with a very viscous and tacky polyamide resin, are reported. The packing materials include a ceramic material used as a proppant in hydraulic fracturing of petroleum wells, and glass beads. The proppant and glass beads have mean diameters of approximately 700 μm and 500 μm, respectively, with the proppant less spherical and more polydisperse than the glass beads. The proppant particles undergo only limited breakage up to the maximum stress imposed here. The glass beads undergo significant breakage. Protocols for the compression can be varied. The reported results use a single loading and unloading at the same speed in each segment (increasing and decreasing stress), as well as a cyclic loading of differing numbers of cycles. The rate of loading is specified and can be varied from 0.56 μm/s–1.7 mm/s, with results here focusing on the range of 1–30 μm/s. Measured stress and permeability are shown as a function of axial load and loading rate, as well as the behavior in cyclic loading. The results are shown to be highly reproducible, establishing the ability to determine the properties of a proppant pack in a small charge device with imposed deformation. The influence of the resin coating on the properties is reported.Direct visualization is one of the key features of the DCD. Local motions and overall rearrangements of particles can be monitored by digital camera. These have been presented using particle image velocimetry (PIV).     

3D Active Edge Silicon Detector Tests With 120 GeV Muons

3D detectors with electrodes penetrating through the silicon wafer and covering the edges were tested in the SPS beam line X5 at CERN in autumn 2003. Detector parameters including efficiency, signal-to-noise ratio, and edge sensitivity were measured using a silicon telescope as a reference system. The measured sensitive width and the known silicon width were equal within less than 10 mum.     

Toward a brief multidimensional assessment of emotional intelligence: Psychometric properties of the Emotional Quotient Inventory—Short Form.

Although several brief instruments are available for the emotional intelligence (EI) construct, their conceptual coverage tends to be quite limited. One notable exception is the short form of the Emotional Quotient Inventory (EQ-i:S), which measures multiple EI dimensions in addition to a global EI index. Despite the unique advantage offered by the inventory, psychometric properties of the EQ-i:S scores have not yet been systematically evaluated. Such an evaluation was the main goal of the present investigation. Using data from 2,508 undergraduates, the authors conducted 2 studies involving factor structure, internal reliability, 6-month temporal stability, and construct validity of the EQ-i:S responses, both for the total EQ scale and for each constituent dimension. The results supported the multidimensional measurement structure of the EQ-i:S, with each dimension producing internally consistent, temporally stable, and theoretically meaningful responses. Scores on the EQ-i:S were associated more strongly with performance on an ability test of EI and with a conceptually similar construct of alexithymia than with the broader dimensions of basic personality and explained nontrivial amounts of incremental variance in the criterion symptoms of attention deficit/hyperactivity disorder. Moreover, scores on each EQ-i:S dimension exhibited unique patterns of associations with the validation variables. The discussion highlights the advantages of the multidimensional approach in the assessment and study of EI. (PsycINFO Database Record (c) 2011 APA, all rights reserved)     

Comparative Analysis of Synthetic Natural Gas versus Hydrogen Production from Bagasse

A rigorous and comparative evaluation of two biomass‐to‐gases (BtG) conversion routes was performed and, according to this outcome, it is suggested which of the options evaluated is most desirable. These options, the hydrogen and synthetic natural gas (SNG) production, were designed in Aspen Plus process simulation software. Sugar cane bagasse was considered as feedstock. Mass and energy balance data were extracted from the simulations, and consequently thermodynamic (exergy analysis), economic (financial and uncertainty analysis), and environmental (CO₂ emissions) evaluations were carried out. Exergy and environmental analysis favor the SNG production while the hydrogen route provides higher profits.