Assessment of the bacteriological quality and nitrate pollution risk of Quaternary groundwater in the southern part of Abidjan District (Côte d’Ivoire)

In this study, total coliforms, thermotolerant coliforms, Escherichia coli and groundwater nitrate concentration were monitored at 127 groundwater sampling points (only 62 water points for bacteriological parameters) located in the southern part of Abidjan District. Each water sampling location was sampled in March and July 2007, representing respectively the long dry season and the long wet season. Geostatistical methods were used to analyze the spatial variability of nitrates and the groundwater nitrate pollution risk. The maximum seasonal content of total coliforms and thermotolerant coliforms ranged from 400 to 1000 CFU/100 mL and from 200 to 500 CFU/100 mL respectively. Moreover, 94% of these locations presented traces of bacteriological contamination. This contamination was mainly recorded during the rainy period. The degree of correlation between bacterial abundance and chemical parameters is variable. Nitrites, ammonium and potassium favoured coliform abundance. In the 127 water points, groundwater nitrate concentrations ranged from 4 to 198 mg L^?1 and were log-normally distributed in the study area. The groundwater contamination risk map indicated that the strongly urbanized west side of the site presented a high probability of exceeding the WHO drinking water standard (50 mg L^?1NO₃^?).     

Characterization of low molecular weight products desorbed from polyethylene tubings

A case study is reported which demonstrates the appearance of numerous organic compounds associated with an intense taste and odor problem during the passage of a drinking water through a 300 m polyethylene pipe. Batch experiments show that two principal mechanisms are involved in the occurence of organoleptic changes caused by defective polyethylene tubings ; dissolution of the polymer additives (e.g. alkylphenols…) and oxidation of the internal surface of the pipe during extrusion with subsequent release of the resulting polar compounds (aldehydes, ketones…). Twenty per cent of the pipes tested (n = 264) appeared to be defective and the total release time may exceed several months under low flow rates conditions.     

Proteomics analysis of liver pathological calcification suggests a role for the IQ motif containing GTPase activating protein 1 in myofibroblast function

To date the cellular and molecular mechanisms by which liver pathological calcifications occur and are regulated are poorly investigated. To study the mechanisms linked to their appearance, we performed a proteomics analysis of calcified liver samples. To this end, human liver biopsies collected in noncalcified (N), precalcified (P), and calcified (C) areas of the liver were subjected to weak ion exchange chromatography, SDS‐PAGE, and LC‐ESI MS/MS analyses. As we previously demonstrated that alpha‐smooth muscle actin (α‐SMA) expressing myofibroblasts were involved in liver pathological calcification, we performed a targeted analysis of actin cytoskeleton remodeling‐related proteins. This revealed dramatic changes in protein expression patterns in the periphery of the calcified areas. More particularly, we found that IQGAP1 and IQGAP2 proteins were subjected to major expression changes. We show that IQGAP1 expression within P and C areas of the liver correlates with the high abundance of myofibroblasts and that IQGAP1 is specifically expressed in these cells. In addition, we find that IQGAP1 is part of a protein complex including β‐catenin and Rac1 mainly in P and C regions of the liver. These results suggest that IQGAP1 may play a critical role in the regulation of cytoskeleton remodeling in liver myofibroblasts in response to liver injury and consequently impact on their function.     

Monolayers and mixed-layers on copper towards corrosion protection

In order to improve the protection abilities of (3-mercaptopropy)trimethoxysilane (MPTS) self-assembled monolayers on copper surfaces, mixed monolayers have been formed successfully by successive immersions in MPTS and in n-dodecanethiol (DT). A newly synthesised molecule, (11-mercaptoundecyl)trimethoxysilane (MUTS), has also been employed to form a thicker organic film on copper surfaces and, thereby, enhance the inhibitory action of the coating. The grafting has been confirmed by X-ray photoelectron spectroscopy (XPS), polarization modulation infrared reflection adsorption spectroscopy (PM-IRRAS) and water contact angle. The protective efficiency of each protective organic film has been evidenced by cyclic voltammetry (CV) and polarization curve measurements (CP). It was shown that the MUTS and unhydrolyzed MPTS/DT films exhibited significant corrosion protection properties.     

Nanoengineering the heart: conductive scaffolds enhance connexin 43 expression

Scaffolds that couple electrical and elastic properties may be valuable for cardiac cell function. However, existing conductive materials do not mimic physiological properties. We prepared and characterized a tunable, hybrid hydrogel scaffold based on Au nanoparticles homogeneously synthesized throughout a polymer templated gel. Conductive gels had Young's moduli more similar to myocardium relative to polyaniline and polypyrrole, by 1-4 orders of magnitude. Neonatal rat cardiomyocytes exhibited increased expression of connexin 43 on hybrid scaffolds relative to HEMA with or without electrical stimulation.     

Enabling and Localizing Omnidirectional Nonlinear Deformation in Liquid Crystalline Elastomers

Liquid crystalline elastomers (LCEs) are widely recognized for their exceptional promise as actuating materials. Here, the comparatively less celebrated but also compelling nonlinear response of these materials to mechanical load is examined. Prior examinations of planarly aligned LCEs exhibit unidirectional nonlinear deformation to mechanical loads. A methodology is presented to realize surface‐templated homeotropic orientation in LCEs and omnidirectional nonlinearity in mechanical deformation. Inkjet printing of the homeotropic alignment surface localizes regions of homeotropic and planar orientation within a monolithic LCE element. The local control of the self‐assembly and orientation of the LCE, when subject to rational design, yield functional materials continuous in composition with discontinuous mechanical deformation. The variation in mechanical deformation in the film can enable the realization of nontrivial performance. For example, a patterned LCE is prepared and shown to exhibit a near‐zero Poisson's ratio. Further, it is demonstrated that the local control of deformation can enable the fabrication of rugged, flexible electronic devices. An additively manufactured device withstands complex mechanical deformations that would normally cause catastrophic failure.     

Reduction of endocrine disruptor emissions in the environment: The benefit of wastewater treatment

The occurrence and fate of four estrogens and five alkylphenolic compounds were studied in thirteen plants with various treatment processes, sizes and countries. Complete load mass balance, including water and sludge phases, has shown a high reduction of the total load of hormones, around 90%. The removal of alkylphenols was more variable, due to the degradation of nonylphenol (NP) precursors - alkylphenol polyethoxylates (APnEO) - during the treatment, resulting in significant production of shorter and toxic alkylphenols (NP and short polyethoxylates) that concentrate in the sludges. Under anaerobic conditions, such as anaerobic digestion process, the load of NP was in most cases observed to increase. When considering the environmental impact, the high reduction of endocrine disrupting compounds (EDC) concentrations between raw wastewater and effluent enables to satisfy the requirements of the Water Framework Directive for NP except in very critical situations where the dilution factor of the effluent in the river would be lower than 7. For sludges, the pending European Directive on spreading of sludge on land would be complied with in all cases.     

Axial conduction in laminar pipe flows with nonlinear wall heat fluxes

A numerical analysis to determine the heat-transfer parameters of a fluid flow rejecting heat to the surrounding medium by convection and radiation is developed. The influence of axial conduction is included and the velocity profile is taken as nonuniform in the transverse direction. Use of a transformation eliminates the required boundary conditions at infinity. Approximate numerical techniques are employed to solve the nonlinear conjugate problem. As Péclet number increases, the temperature fields simplify to those where axial conduction is excluded. The computed results indicate that the effects of axial conduction are strongly altered by the parameters responsible for the convection and radiation. Bulk fluid temperatures, wall heat fluxes and Nusselt numbers are plotted against Graetz numbers. Critical Péclet numbers for a variety of cooling conditions are presented using the bulk fluid temperature as a reference.