Distribution-free checkpoint placement algorithms based on min-max principle

In this paper, we consider two kinds of sequential checkpoint placement problems with infinite/finite time horizon. For these problems, we apply approximation methods based on the variational principle and develop computation algorithms to derive the optimal checkpoint sequence approximately. Next, we focus on the situation where the knowledge on system failure is incomplete, i.e., the system failure time distribution is unknown. We develop the so-called min-max checkpoint placement methods to determine the optimal checkpoint sequence under an uncertain circumstance in terms of the system failure time distribution. In numerical examples, we investigate quantitatively the proposed distribution-free checkpoint placement methods, and refer to their potential applicability in practice.     

Biomechanical study of sternal closure using rigid fixation techniques in human cadavers

BACKGROUND: We believe rigid plate fixation may be superior to wire fixation in sternal closure, as rigid fixation used in the craniofacial skeleton has shown greater stability, lower postoperative pain, and accelerated bone healing. We hypothesize that sterna fixed with titanium plates are more stable mechanically than sterna fixed with wires. METHODS: The sterna from human cadavers were used in this two-phased study. Phase I compared wires to four-hole titanium straight plates. Phase II compared wires to four-hole titanium custom H plates. The sterna were tested biomechanically using all fixation methods. RESULTS: Phase I showed no statistically significant difference in the stiffness or lateral displacement between the wired and straight plated sterna. Phase II showed a statistically significant greater stiffness (p < 0.05) and less lateral displacement (p < 0.05) in the custom plated sterna over the wired sterna. CONCLUSIONS: Our results showed that custom titanium H plates were superior to wire fixation. Furthermore, our results established the importance of plate configuration in sternal fixation. Our study may have beneficial clinical implications, as decreased motion at the sternotomy site could mean less postoperative pain, a decreased incidence of infection, and accelerated bone healing.     

Susceptibilities of bacteria isolated from patients with lower respiratory infectious diseases to antibiotics (1996)

The bacteria isolated from the patients with lower respiratory tract infections were collected by institutions located throughout Japan, since 1981. Ikemoto et al. have been investigating susceptibilities of these isolates to various antibacterial agents and antibiotics, and characteristics of the patients and isolates from them each year. Results obtained from these investigations are discussed. In 16 institutions around the entire Japan, 557 strains of presumably etiological bacteria were isolated mainly from the sputa of 449 patients with lower respiratory tract infections during the period from October 1996 to September 1997. MICs of various antibacterial agents and antibiotics were determined against 98 strains of Staphylococcus aureus, 93 strains of Streptococcus pneumoniae, 84 strains of Haemophilus influenzae, 84 strains of Pseudomonas aeruginosa (non-mucoid strains), 17 strains of Pseudomonas aeruginosa (mucoid strains), 31 strains of Moraxella subgenus Branhamella catarrhalis, 21 strains of Klebsiella pneumoniae etc., and the drug susceptibilities of these strains were assessed except for those strains that died during transportation. 1) S. aureus S. aureus strains for which MICs of oxacillin (MPIPC) were higher than 4 micrograms/ml (methicillin-resistant S. aureus) accounted for 67.3%. The frequency of the drug resistant bacteria increased comparing to the previous year's 52.7%. Arbekacin (ABK) and vancomycin (VCM) showed the highest activities against both S. aureus and MRSA with MIC80s of 1 microgram/ml. 2) S. pneumoniae Imipenem (IPM) and panipenem (PAPM) of carbapenems showed the most potent activities with MIC80s of 0.063 microgram/ml. Faropenem (FRPM) showed the next potent activity with MIC80 of 0.125 microgram/ml. The other drugs except erythromycin (EM), clindamycin (CLDM) and tetracycline (TC) were active against S. pneumoniae tested with MIC80s of 8 micrograms/ml or below. 3) H. influenzae The activities of all drugs were potent against H. influenzae tested with MIC80s of 4 micrograms/ml or below. Cefotiam (CTM), cefmenoxime (CMX), cefditoren (CDTR) and ofloxacin (OFLX) showed the most potent activities with MIC80s of 0.063 microgram/ml. 4) P. aeruginosa (mucoid strains) Tobramycin (TOB) showed the most potent activity against P. aeruginosa (mucoid strains) with MIC80 of 1 microgram/ml. Ceftazidime (CAZ), cefsulodin (CFS), IPM, gentamicin (GM), ABK and ciprofloxacin (CPFX) showed the next potent activities, with MIC80s of 2 micrograms/ml. The MIC80s of the other drugs ranged from 4 micrograms/ml to 16 micrograms/ml. 5) P. aeruginosa (non-mucoid strains) TOB and CPFX showed the most potent activities against P. aeruginosa (non-mucoid strains) with MIC80s of 1 microgram/ml. The MIC80s of piperacillin (PIPC) and cefoperazone (CPZ) were 16 micrograms/ml in 1995, and they were 64 micrograms/ml in 1996. 6) K. pneumoniae All drugs except ampicillin (ABPC) were active against K. pneumoniae. CMX, cefpirome (CPR), cefozopran (CZOP) and carumonam (CRMN) showed the most potent activities against K. pneumoniae with MIC80s of 0.125 microgram/ml. The MIC80s of the other drugs ranged from 0.25 microgram/ml to 2 micrograms/ml. 7) M.(B) catarrhalis Against M.(B.) catarrhalis, all drugs showed good activities with MICs of 4 micrograms/ml or below. IPM and minocycline (MINO) showed the most potent activities with MICs of 0.063 microgram/ml. Also, we investigated year to year changes in the characteristics of patients, their respiratory infectious diseases, and the etiology. Patients' backgrounds were examined for 557 isolates from 449 cases. The examination of age distribution indicated that the proportion of patients with ages over 60 years was 71.0% of all the patients showing a slight increase over that in 1994. Proportions of diagnosed diseases were as follows: Bacterial pneumonia and chronic bronchitis were the most frequent with 35.9% and 30.3% respectively. They were followed by bronchiectasis with a proportion of 10.     

Ultraviolet-visible and surface-enhanced Raman scattering spectroscopy studies on self-assembled metalloporphyrin films on organic monolayer-modified ultra-thin silver substrates

A self-assembled monolayer (SAM) film of 5,10,15,20-tetra-(para-chlorophenyl)-porphyrin terbium (or lutetium) hydroxy compound (TbOH/LuOH) fabricated on a silver substrate premodified with a SAM of 4-mercaptopyridine (PySH) was studied by ultraviolet-visible (UV-Vis) spectroscopy and surface-enhanced Raman scattering (SERS) spectroscopy. PySH can modify the substrate and deliver its pyridyl group pointing out from the silver surface. Thus, we can investigate the effects of the central metals of the metalloporphyrins in the formation of the composite films. For the TbOH-PySH composite film, a new absorption band arising from TbOH appears at 425 nm, and a band at 512 nm due to the PySH-modified silver substrate shifts to a longer wavelength (538 nm). The results suggest that TbOH is successfully assembled on the top of PySH-modified silver film and that there is an interaction between TbOH and PySH in the film. The frequency shifts and relative intensity changes of bands due to PySH in the SERS spectra imply the coordination of the pyridyl group on Tb in the SAM. As for the LuOH-PySH composite film, its SERS spectrum shows bands arising from both the LuOH and PySH moieties, indicating that LuOH is assembled on the PySH-modified silver film. Furthermore, a band at 1221 cm(-1) due to the in-plane C-H bending mode of PySH disappears, implying that the pyridyl moiety of PySH becomes more parallel to the silver surface upon the formation of the LuOH-PySH composite film. Additionally, an absorption band at 515 nm shifts to a longer wavelength (541 nm) and becomes broad upon the formation of the composite film, suggesting an interaction between LuOH and PySH in the film. By comparing the spectral changes between the two self-assembled composite films, we find that the central metal is crucial in the formation of the composite films. The structure and orientation of the composite films depend on the central metal of the metalloporphyrin compounds.     

Part I: surface-enhanced Raman spectroscopy investigation of amino acids and their homodipeptides adsorbed on colloidal silver

Surface-enhanced Raman scattering spectra (SERS) were measured for various amino acids: L-methionine (Met), L-cysteine (Cys), Lglycine (Gly), L-leucine (Leu), L-phenylalanine (Phe), and L-proline (Pro) and their homodipeptides (Met-Met, Cys-Cys, Gly-Gly, LeuLeu, Phe-Phe, and Pro-Pro) in silver colloidal solutions. The geometry and orientation of the amino acids or dipeptides on the silver surface, and their specific interaction with the surface, were deducted by detailed spectral analysis of the SERS spectra. This analysis has allowed us to propose the particular surface geometry of amino acids or dipeptides and also implied that C-C bonds were almost parallel to the surface, as evidenced by the absence of marker bands in the skeletal C-C stretching region of the spectra. Additionally, using "time-dependent" SERS measurements we solved an existing controversy regarding the binding specificity of Gly-Gly on the silver surface.     

Development and applications of a compact hybrid tabletop terawatt chirped-pulse amplification Ti:sapphire-Nd:glass laser for x-ray lasing and harmonic generation

A hybrid tabletop (2 m x 3 m) terawatt chirped-pulse amplification Ti:sapphire-Nd:glass laser (1054 nm, 475 fs, 500 mJ, 9 x 10(17) W cm(-2)) has been developed for laser-matter experiments. An overall gain factor of 10(10) was achieved for the laser. The results of laser applications in the studies of soft-x-ray Ni-like Mo 18.9-nm lasing and of harmonic generation from solid surfaces are presented.     

Prediction of ethylene content in melt-state random and block polypropylene by near-infrared spectroscopy and chemometrics: comparison of a new calibration transfer method with a slope/bias correction method

This paper reports the prediction of the ethylene content (C2 content) in random polypropylene (RPP) and block polypropylene (BPP) in the melt state by near-infrared (NIR) spectroscopy and chemometrics. NIR spectra of RPP and BPP in the melt states were measured by a Fourier transform near-infrared (FT-NIR) on-line monitoring system. The NIR spectra of RPP and BPP were compared. Partial least-squares (PLS) regression calibration models predicting the ethylene (C2) content that were developed by using each RPP or BPP spectra set separately yielded good results (SECV (standard error of cross validation): RPP, 0.16%; BPP, 0.31%; correlation coefficient: RPP, 0.998; BPP, 0.996). We also built a common PLS calibration model by using both the RPP and the BPP spectra set. The results showed that the common calibration model has larger SECV values than the models based on the RPP or the BPP spectra sets individually and is not practical for the prediction of the C2 content. We further investigated whether a calibration model developed by using the BPP spectra set can predict the C2 contents in the RPP sample set. If this is possible, it can save a significant amount of work and cost. The results showed that the use of the BPP model for the RPP sample set is difficult, and vice versa, because there are some differences in the molar absorption coefficients between the RPP and BPP spectra. To solve this problem, a transfer method from one sample spectra (BPP) set to the other spectra (RPP) set was studied. A difference spectrum between an RPP spectrum and a BPP spectrum was used to transfer from the BPP calibration set to the RPP calibration set. The prediction result (SEP (standard error of prediction), 0.23%, correlation coefficient, 0.994) of RPP samples by the transferred calibration set and model showed that it is possible to transfer from the BPP calibration set to the RPP calibration set. We also studied the transfer from the RPP calibration set (the range of C2 content: 0-4.3%) to the BPP calibration set. The prediction result of C2 content (the range of C2 contents: 0-7.7%) in BPP by use of the calibration model based on the transferred BPP spectra from the RPP spectra showed that the transfer method is only effective for the interpolation of the C2 content range by the nonlinear change in the peak intensities with the C2 content.     

Temperature-dependent near-infrared spectra of bovine serum albumin in aqueous solutions: spectral analysis by principal component analysis and evolving factor analysis

Fourier transform near-infrared (FT-NIR) spectra have been measured for bovine serum albumin (BSA) in an aqueous solution (pH 6.8) with a concentration of 5.0 wt% over a temperature range of 45-85 degrees C. Not only conventional spectral analysis methods, such as second-derivative spectra and difference spectra, but also chemometrics, such as principal component analysis (PCA) and evolving factor analysis (EFA), have been employed to analyze the temperature-dependent NIR spectra in the 7500-5500 and 4900-4200 cm-1 regions of the BSA aqueous solution. Intensity changes of bands in the 7200-6600 cm-1 and 4650-4500 cm-1 regions in the difference spectra indicate variations of the hydration and secondary structure of BSA in the aqueous solution, respectively. The plot of a band intensity at 7080 cm-1 in the different spectra shows a clear turning point at 63 degrees C, revealing that a significant change in the hydration occurs at about 63 degrees C. The forward and backward eigenvalues (EVs) from EFA suggest that marked changes in the hydration and secondary structure of BSA take place in the temperature ranges of 61-65 degrees C and 59-63 degrees C, respectively. In addition, the temperature of 71 degrees C marked in the EFA plots may correspond to the onset temperature of increase in the intermolecular beta-sheet structure.     

Band analysis of temperature-dependent near-infrared spectra of oleic acid in the pure liquid state by the analytic geometric approach

The applicability of the band-stripping and complementary matching method has been demonstrated by the analysis of temperature-dependent near-infrared (NIR) absorption spectra in the 7500-6500 cm(-1) region of oleic acid (cis-9-octadecenoic acid) in the pure liquid state. This method is based on first derivative-second derivative pair (D1-D2) plots and a new concept called the complementary band, cBDi, created by subtracting all the rest of the bands, exclusive of the ith estimated band, eBDi, from an experimental spectrum. The degree of coincidence of both band shapes provides a suitable measure for the quality of fit for each individual component band. It has been confirmed from the present analysis of the NIR spectra of oleic acid measured over a temperature range of 16-79 degrees C that the change of the peak intensity of the component band at around 6915 cm(-1) due to the first overtone of an O-H stretching vibration of the monomer has two transition points around 35 and 55 degrees C. Moreover, the present study has provided new insight into the analysis of temperature-dependent spectral variations of oleic acid. Among the three temperature ranges, 16-35 degrees C, 35-55 degrees C, and 55-79 degrees C, in the first range the band near 6915 cm(-1) shows a slight increase and in the second range it has a linear intensity change with a slope of 0.002 a.u./degree C. In the third range, a rapid increase of the peak intensity is observed. This band exists even at 15 degrees C (just below the melting point) and shows a shift from 6910 to 6915 cm(-1) and a band narrowing from 85 to 80 cm(-1) (full width at half-height) over a temperature range of 16 to 79 degrees C. Furthermore, it has been found that there are two broad bands at around 6835 and 6778.