Effects of Solvent Exchange Period and Heat Treatment on Physical and Chemical Properties of Rice Husk Derived Silica Aerogels

In this study, hydrophobic silica aerogels were synthesized from rice husk ash-derived sodium silicate through sol-gel processing, solvent exchange, surface modification and ambient pressure drying. By volume, 10% of trimethylchlorosilane (TMCS) in 90% of n-hexane was used as a hydrophobic solution in the surface modification process. The physical and chemical properties of silica aerogels were characterized by density and porosity measurements, scanning electron microscopy (SEM), Fourier transforms infrared (FTIR) spectroscopy, Brunauer–Emmett–Teller theory (BET) and dynamic scanning calorimetry (DSC). The hydrogels prepared were in the form of 2.5 ± 0.5 mm beads and then converted into alcogels through solvent exchange with ethanol for repetition of 3, 6 and 9 days. It is found that the optimal quality of silica aerogels with the BET surface area as high as 668.82 m²/g was obtained from the alcogels of the solvent exchange period of 9 days. Depending on the size of the gel’s block, a longer solvent exchange period will ensure adequate removal of pore water. Post heat treatment on silica aerogels obtained from the 9 days of solvent exchange at 200, 300 and 400 °C for 2 h results in slight decreased of aerogel’s density from 0.048 g/cm³ to 0.039 g/cm³ and the hydrophobicity of the aerogels is decreased above 380 °C as confirmed by DSC analysis.

     

Evaluation of corrosion behavior of Al-Mg-Li alloys in seawater

Weldalite 050, a high-strength Al-Mg-Li alloy, was evaluated for its corrosion resistance in deaerated and air saturated Arabian Gulf water to determine its suitability for marine applications. Weight loss and electrochemical studies showed that the alloy had minimum corrosion rates of 1.82 and 4.82 mpy (mils per year), respectively, in deaerated and air saturated Arabian Gulf water with very high total dissolved solids (TDS) content. Weldalite 050 exhibited good resistance to corrosion at velocities up to 3.9 m/s. The formation of Al₂MgLi, Al-Li, Al₁₂Mg₁₇, and Al-Li precipitates has a pronounced effect on its corrosion resistance. The corrosion resistance of Weldalite 050 compares favorably with that of alloys 5052 and 5054, wrought alloys 6061 and 6013, and silicon carbide (SiC) reinforced alloys 6061 and 6013.     

An open-source multi-DOF articulated robotic educational platform for autonomous object manipulation

This research presents an autonomous robotic framework for academic, vocational and training purpose. The platform is centred on a 6 Degree Of Freedom (DOF) serial robotic arm. The kinematic and dynamic models of the robot have been derived to facilitate controller design. An on-board camera to scan the arm workspace permits autonomous applications development. The sensory system consists of position feedback from each joint of the robot and a force sensor mounted at the arm gripper. External devices can be interfaced with the platform through digital and analog I/O ports of the robot controller. To enhance the learning outcome for beginners, higher level commands have been provided. Advanced users can tailor the platform by exploiting the open-source custom-developed hardware and software architectures. The efficacy of the proposed platform has been demonstrated by implementing two experiments; autonomous sorting of objects and controller design. The proposed platform finds its potential to teach technical courses (like Robotics, Control, Electronics, Image-processing and Computer vision) and to implement and validate advanced algorithms for object manipulation and grasping, trajectory generation, path planning, etc. It can also be employed in an industrial environment to test various strategies prior to their execution on actual manipulators.     

Temperature-dependent diffusion coefficient of soluble substances during ethanol extraction of clove

The temperature dependence of the diffusion coefficient of ethanol-soluble substances from ground cloves (particle size 250 μm) during extraction was estimated by fitting batch extraction data at several temperatures (27.8, 40, 50, and 60°C) to a previously developed mass transfer model. The model was based on spherical geometry of particles. Nonlinear regression analysis was used to develop an equation that describes the diffusivity as a function of temperature. The temperature dependence ofD _A was of the Arrhenius type.     

Prediction of human breast and colon cancers from imbalanced data using nearest neighbor and support vector machines

This study proposes a novel prediction approach for human breast and colon cancers using different feature spaces. The proposed scheme consists of two stages: the preprocessor and the predictor. In the preprocessor stage, the mega-trend diffusion (MTD) technique is employed to increase the samples of the minority class, thereby balancing the dataset. In the predictor stage, machine-learning approaches of K-nearest neighbor (KNN) and support vector machines (SVM) are used to develop hybrid MTD-SVM and MTD-KNN prediction models. MTD-SVM model has provided the best values of accuracy, G-mean and Matthew's correlation coefficient of 96.71%, 96.70% and 71.98% for cancer/non-cancer dataset, breast/non-breast cancer dataset and colon/non-colon cancer dataset, respectively. We found that hybrid MTD-SVM is the best with respect to prediction performance and computational cost. MTD-KNN model has achieved moderately better prediction as compared to hybrid MTD-NB (Naïve Bayes) but at the expense of higher computing cost. MTD-KNN model is faster than MTD-RF (random forest) but its prediction is not better than MTD-RF. To the best of our knowledge, the reported results are the best results, so far, for these datasets. The proposed scheme indicates that the developed models can be used as a tool for the prediction of cancer. This scheme may be useful for study of any sequential information such as protein sequence or any nucleic acid sequence.     

Extracting lexical and phrasal paraphrases: a review of the literature

Recent advances in natural language processing have increased the popularity of paraphrase extraction. Most of the attention, however, has been focused on the extraction methods only without taking the resource factor into the consideration. Unknowingly, there is a strong relationship between them and the resource factor also plays an equally important role in paraphrase extraction. In addition, almost all of the previous studies have been focused on corpus-based methods that extract paraphrases from corpora based solely on syntactic similarity. Despite the popularity of corpus-based methods, a considerable amount of research has consistently shown that these methods are vulnerable to several types of erroneous paraphrases. For these reasons, it is necessary to evaluate whether the trend is moving in a positive direction. This paper reviews the major research on paraphrase extraction methods in detail. It begins by exploring the definition of paraphrase from different perspectives to provide a better understanding of the concept of paraphrase extraction. It then studies the characteristics and potential uses of different types of paraphrase resources. After that, it divides paraphrase extraction methods into four main categories: heuristic-based, knowledge-based, corpus-based and hybrid-based and summarizes their strengths and weaknesses. This paper concludes with some potential open research issues for future directions.     

Feature extraction and ML techniques for static gesture recognition

The main objective of this study is to explore the utility of a neural network-based approach in hand gesture recognition. The proposed system presents two recognition algorithms to recognize a set of six specific static hand gestures, namely open, close, cut, paste, maximize, and minimize. The hand gesture image is passed through three stages: preprocessing, feature extraction, and classification. In the first method, the hand contour is used as a feature that treats scaling and translation of problems (in some cases). However, the complex moment algorithm is used to describe the hand gesture and to treat the rotation problem in addition to scaling and translation. The back-propagation learning algorithm is employed in the multilayer neural network classifier. The second method proposed in this article achieves better recognition rate than the first method.     

Attribute weighted Naive Bayes classifier using a local optimization

The Naive Bayes classifier is a popular classification technique for data mining and machine learning. It has been shown to be very effective on a variety of data classification problems. However, the strong assumption that all attributes are conditionally independent given the class is often violated in real-world applications. Numerous methods have been proposed in order to improve the performance of the Naive Bayes classifier by alleviating the attribute independence assumption. However, violation of the independence assumption can increase the expected error. Another alternative is assigning the weights for attributes. In this paper, we propose a novel attribute weighted Naive Bayes classifier by considering weights to the conditional probabilities. An objective function is modeled and taken into account, which is based on the structure of the Naive Bayes classifier and the attribute weights. The optimal weights are determined by a local optimization method using the quasisecant method. In the proposed approach, the Naive Bayes classifier is taken as a starting point. We report the results of numerical experiments on several real-world data sets in binary classification, which show the efficiency of the proposed method.     

A novel image encryption based on hash function with only two-round diffusion process

In this paper, a novel algorithm for image encryption based on hash function is proposed. In our algorithm, a 512-bit long external secret key is used as the input value of the salsa20 hash function. First of all, the hash function is modified to generate a key stream which is more suitable for image encryption. Then the final encryption key stream is produced by correlating the key stream and plaintext resulting in both key sensitivity and plaintext sensitivity. This scheme can achieve high sensitivity, high complexity, and high security through only two rounds of diffusion process. In the first round of diffusion process, an original image is partitioned horizontally to an array which consists of 1,024 sections of size 8 × 8. In the second round, the same operation is applied vertically to the transpose of the obtained array. The main idea of the algorithm is to use the average of image data for encryption. To encrypt each section, the average of other sections is employed. The algorithm uses different averages when encrypting different input images (even with the same sequence based on hash function). This, in turn, will significantly increase the resistance of the cryptosystem against known/chosen-plaintext and differential attacks. It is demonstrated that the 2D correlation coefficients (CC), peak signal-to-noise ratio (PSNR), encryption quality (EQ), entropy, mean absolute error (MAE) and decryption quality can satisfy security and performance requirements (CC <0.002177, PSNR <8.4642, EQ >204.8, entropy >7.9974 and MAE >79.35). The number of pixel change rate (NPCR) analysis has revealed that when only one pixel of the plain-image is modified, almost all of the cipher pixels will change (NPCR >99.6125 %) and the unified average changing intensity is high (UACI >33.458 %). Moreover, our proposed algorithm is very sensitive with respect to small changes (e.g., modification of only one bit) in the external secret key (NPCR >99.65 %, UACI >33.55 %). It is shown that this algorithm yields better security performance in comparison to the results obtained from other algorithms.