平行坐标技术在干式变压器温度场可视化分析中的应用

本文中笔者将平行坐标技术应用于变压器温度场多维可视化分析,以矿用变压器为例,给出了其高、低压绕组纵向温度分布.     

聚酯装置全消光转产特种消光过渡优化

总结了中国石化仪征化纤有限责任公司全消光转产特种消光切片的现状,根据理论计算反应釜中的TiO2含量随时间变化的公式,探索影响转产过渡时间的因素,为减少转产过渡时间,降低过渡料提供理论依据.     

企业内部控制与CFO行为主体独立性分析

文章分析和介绍了企业内部控制的重要意义以及CFO行为主体的独立性内涵,重点剖析了企业内部控制与CFO行为主体独立性之间的内在关联,在此基础上提出了强化CFO行为主体独立性、提高企业内部控制质量的建议,以期为企业发展战略的制定提供经验参考.     

大型球铁水表壳加工工装设计与加工

针对表壳具有较多复杂曲面及三端加工特点及需求,通过对球铁水表壳的外形及加工特点进行分析,提出合理的设计加工工序方案,选用特种加工设备及专业的工装夹具.通过针对表壳外形及加工工艺特点设计专业的工装夹具达到一次装夹多工序同时加工,有效解决了传统加工工艺的多工序多道加工,提高加工效率并确保加工质量.     

Preparation and antifouling performance of thin inorganic ultrafiltration membrane via assisted sol-gel method with different composition of dual additives

A novel TiO₂ thin film was prepared on the ceramic hollow fiber by the sol-gel method using poly(vinylpyrrolidone) (PVP) and polyvinyl alcohol (PVA) as additives. SEM images verified the formation of TiO₂ layer with various thickness using different composition of titania sols. The effect of the PVP and PVA contents on the TiO₂ sol properties, the separation and the antifouling performance of the ultrafiltration membranes were investigated thoroughly. When the contents of PVP and PVA were 1.0 wt% and 0.8 wt%, respectively, the resultant membrane showed a thickness of 0.55 μm with a pure water flux of 255 L m^?2 h^?1. In addition, the adherent foulant bovine serum albumin was applied to evaluate the antifouling performance. During the three fouling-recovery cycles, the flux recovery ratio and the flux decay ratio maintained about 99% and 30%. The BSA flux and rejection were still 169 L m^?2 h^?1 and 96.9% after the cycles, indicating a superior antifouling property.     

Spatiotemporal Magnetocaloric Microenvironment for Guiding the Fate of Biodegradable Polymer Implants

The degradation behavior of implants is significantly important for bone repair. However, it is still unprocurable to spatiotemporally regulate the degradation of the implants to match bone ingrowth. In this paper, a magneto-controlled biodegradation model is established to explore the degradation behavior of magnetic scaffolds in a magnetothermal microenvironment generated by an alternating magnetic field (AMF). The results demonstrate that the scaffolds can be heated by magnetic nanoparticles (NPs) under AMF, which dramatically accelerated scaffold degradation. Especially, magnetic NPs modified by oleic acid with a better interface compatibility exhibit a greater heating efficiency to further facilitate the degradation. Furthermore, the molecular dynamics simulations reveal that the enhanced motion correlation between magnetic NPs and polymer matrix can accelerate the energy transfer. As a proof-of-concept, the feasibility of magneto-controlled degradation for implants is demonstrated, and an optimizing strategy for better heating efficiency of nanomaterials is provided, which may have great instructive significance for clinical medicine.     

负极添加NMP对电池性能的影响

锂离子电池负极浆料中添加N-甲基吡咯烷酮(NMP),在极片加热干燥时不能完全除去.残留的NMP吸附在石墨表面,使得SEI膜与石墨结合不牢固.研究了其对电池性能的影响,结果显示,在电池的循环过程中,SEI膜逐渐脱落,导致电池循环寿命缩短,但对电池的容量、内阻、倍率、存储等初期性能不影响.     

基于VR技术的虚拟智能车间实训系统设计

为解决传统实训系统在应用中存在的实际问题,开展基于VR技术的虚拟智能车间实训系统设计研究.对系统服务器及车间实训内容开发板进行选型;基于VR技术对虚拟智能车间模型进行处理,演示车间实训内容等,完成基于VR技术的虚拟智能车间实训系统设计.实验证明,本文设计的实训系统与传统实训系统相比,能够实现对实训资源的高精度分配,满足学生实训学习所需.该系统为实训者提供了一个虚拟可视化的实训基地,极大地提高了实训者的应用技能,同时也为制造业的相关领域带来变革.通过实验进一步证明,设计的实训系统与传统实训系统相比,能够实现对实训资源的高精度分配,满足学生实训学习所需.