Colorimetric microdetermination of sulphites in foods by use of the modified rankine apparatus. IV.

Summary Detection and determination of traces of sulphites in foods was attempted by use of the modified Rankine apparatus and pararosaniline colorimetry. Replacement of alkaline titration reported previously by pararosaniline colorimetry lowered the absolute detection limit from 30 g (titration method) to 2 g. In view of clean analysis, in the color developing system, 0.1 N-sodium hydroxide was used in place of mercuric chloride solution commonly used as an absorbant of sulphites. In order to prevent oxidative decomposition of sulphites during operation, nitrogen gas was used as carrier instead of air. Dimedone and sodium azide were used for the elimination of aldehydes and nitrites, respecitvely, in the sample, which will disturb the color development of sulphites with pararosaniline-formaldehyde reagents. With this improved method, it was possible to determine the residual sulphites in frozen peeled shrimps, sugared beans and other foods with low sulphite contents accurately.

---

Colorimetrische Mikrobestimmung von Sulfiten in Lebensmitteln bei Anwendung der modifizierten IV. Rankine Apparatur

Zusammenfassung Geringe Sulfitmengen in Lebensmitteln (geschälte Garnelen, gezuckerte Bohnen) können colorimetrisch bestimmt werden. Die neuentwickelte Methode beruht auf einer Kombination von colorimetrischer Bestimmung mittels p-Rosanilin und der Bestimmungsmethode nach Rankine. Auf diese Weise lassen sich Gehalte von 2 g noch genau bestimmen. Bei der Farbentwicklung wurde das giftige Quecksilbertetrachlorid durch 0.1 n-NaOH ersetzt, anstelle von Luft Stickstoff als Trägergas verwendet und somit eine Oxydation des Sulfits während der Bestimmung vermieden. Da Nitrit und Aldehyde die Farbentwicklung stören, wurde ihr Einfluß durch Dimedon und Natriumazid ausgeschaltet.

---

---

Studies on the Analyses of Sulphites in Foods (IV)     

High-intensity multi-bunch beam generation by a photo-cathode RF gun

A multi-bunch photo-cathode RF gun system has been developed as an electron source for the production of intense quasi-monochromatic X-rays based on inverse Compton scattering. The desired multi-bunch beam is 100 bunches/pulse with a total charge of 500 nC and a bunch spacing of 2.8 ns. We modified the gun cavity of a ‘BNL-type IV’ RF gun to allow a CsTe cathode plug in the end plate. The system uses a four-dipole chicane beam line to allow the injection of laser light normal to the cathode surface. We compensate the gun cavity beam loading caused by the high-intensity multi-bunch electron beam by injecting the laser pulse before RF power has filled the cavity. We have achieved a total intensity of 220 nC in 100 bunches with a bunch-to-bunch energy spread under 1.3% (peak-to-peak). This paper concentrates on experiments to generate the high-intensity multi-bunch beam with compensation of the bunch-to-bunch energy spread due to heavy beam loading.     

Extraction of low-toxicity nanodiamonds from carbonaceous wastes

Being innocuous, nanodiamonds find huge applications in bioimaging, drug delivery and biomedical sensing. Their synthesis is generally carried out by detonation or shock wave methods. This article reports novel, economical and risk-free extraction of nanodiamonds from carbonaceous waste (smoke deposits of Hawan kund). Structural and morphological studies of extracted material revealed that the nanodiamonds have a size range of 4–5 nm and consists of sp³ core and sp² shell. Extracted nanodiamonds contain various functional groups on its surface which make it suitable for various applications. Cytotoxicity assay revealed very less toxicity of extracted nanodiamonds, which makes them suitable candidate for biological applications. The proposed method offers the possibility of economical and detonation free production of nanodiamonds.     

Effect of Platelet-Rich Plasma on M1/M2 Macrophage Polarization

Osteoarthritis of the knee (OAK) is a chronic degenerative disease and progresses with an imbalance of cytokines and macrophages in the joint. Studies regarding the use of platelet-rich plasma (PRP) as a point-of-care treatment for OAK have reported on its effect on tissue repair and suppression of inflammation but few have reported on its effect on macrophages and macrophage polarization. Based on our clinical experience with two types of PRP kits Cellaid Serum Collection Set P type kit (leukocyte-poor-PRP) and an Autologous Protein Solution kit (APS leukocyte-rich-PRP), we investigated the concentrations of humoral factors in PRPs prepared from the two kits and the effect of humoral factors on macrophage phenotypes. We found that the concentrations of cell components and humoral factors differed between PRPs purified using the two kits; APS had a higher concentration of M1 and M2 macrophage related factors. The addition of PRP supernatants to the culture media of monocyte-derived macrophages and M1 polarized macrophages revealed that PRPs suppressed M1 macrophage polarization and promoted M2 macrophage polarization. This research is the first to report the effect of PRPs purified using commercial kits on macrophage polarization.     

Exploration on efficient similar sentences extraction

Measuring the semantic similarity between sentences is an essential issue for many applications, such as text summarization, Web page retrieval, question-answer model, image extraction, and so forth. A few studies have explored on this issue by several techniques, e.g., knowledge-based strategies, corpus-based strategies, hybrid strategies, etc. Most of these studies focus on how to improve the effectiveness of the problem. In this paper, we address the efficiency issue, i.e., for a given sentence collection, how to efficiently discover the top-k semantic similar sentences to a query. The previous methods cannot handle the big data efficiently, i.e., applying such strategies directly is time consuming because every candidate sentence needs to be tested. In this paper, we propose efficient strategies to tackle such problem based on a general framework. The basic idea is that for each similarity, we build a corresponding index in the preprocessing. Traversing these indices in the querying process can avoid to test many candidates, so as to improve the efficiency. Moreover, an optimal aggregation algorithm is introduced to assemble these similarities. Our framework is general enough that many similarity metrics can be incorporated, as will be discussed in the paper. We conduct extensive experimental evaluation on three real datasets to evaluate the efficiency of our proposal. In addition, we illustrate the trade-off between the effectiveness and efficiency. The experimental results demonstrate that the performance of our proposal outperforms the state-of-the-art techniques on efficiency while keeping the same high precision as them.     

Experimental study on relationship between heat parameter and angular distortion

It is well known that weld residual stress and distortion should be controlled appropriately for structural integrity. Recently, it has become much more necessary to control weld distortion to highly improve manufacturing efficiency. Various studies on control of weld distortion had been conducted based on clarification of influential dominant factors for that. The influential dominant factors had been studied from a viewpoint of temperature distribution in plate thickness section. Without considering moving the weld heat source, the temperature distribution is controlled by weld heat input (Q_net) per weld length. Angular distortion, which is controlled by temperature distribution along the direction of plate thickness (h), is controlled by heat input parameter (Q_net/h²). However, it has recently become known that the conventional results cannot be applied to all welding processes because such processes are becoming more diversified. It is significant for more accurate control of angular distortion to investigate once again the relationship between the heat input parameter and angular distortion. In this study, a series of experiments on the relationship between heat input parameter and angular distortion are carried out. The effects of welding current and welding speed are investigated individually in both TIG and MAG welding. The difference between these welding methods is also investigated. Based on the result, the effects of them are discussed in relation to temperature distribution during welding. It is considered that angular distortion is affected by temperature distribution not only in plate thickness section but also along welding direction. So, angular distortion is not always controlled by only the conventional heat input parameter because the heat input parameter is proposed as the influential dominant factor for temperature distribution in plate thickness section. It is concluded that generation characteristics of inherent strain should be considered in relation to three-dimensional temperature distributions during welding for more accurate control of angular distortion.     

Source identification of nitrous oxide on autotrophic partial nitrification in a granular sludge reactor

Emission of nitrous oxide (N₂O) during biological wastewater treatment is of growing concern since N₂O is a major stratospheric ozone-depleting substance and an important greenhouse gas. The emission of N₂O from a lab-scale granular sequencing batch reactor (SBR) for partial nitrification (PN) treating synthetic wastewater without organic carbon was therefore determined in this study, because PN process is known to produce more N₂O than conventional nitrification processes. The average N₂O emission rate from the SBR was 0.32 ± 0.17 mg-N L⁻¹ h⁻¹, corresponding to the average emission of N₂O of 0.8 ± 0.4% of the incoming nitrogen load (1.5 ± 0.8% of the converted NH₄⁺). Analysis of dynamic concentration profiles during one cycle of the SBR operation demonstrated that N₂O concentration in off-gas was the highest just after starting aeration whereas N₂O concentration in effluent was gradually increased in the initial 40 min of the aeration period and was decreased thereafter. Isotopomer analysis was conducted to identify the main N₂O production pathway in the reactor during one cycle. The hydroxylamine (NH₂OH) oxidation pathway accounted for 65% of the total N₂O production in the initial phase during one cycle, whereas contribution of the NO₂⁻ reduction pathway to N₂O production was comparable with that of the NH₂OH oxidation pathway in the latter phase. In addition, spatial distributions of bacteria and their activities in single microbial granules taken from the reactor were determined with microsensors and by in situ hybridization. Partial nitrification occurred mainly in the oxic surface layer of the granules and ammonia-oxidizing bacteria were abundant in this layer. N₂O production was also found mainly in the oxic surface layer. Based on these results, although N₂O was produced mainly via NH₂OH oxidation pathway in the autotrophic partial nitrification reactor, N₂O production mechanisms were complex and could involve multiple N₂O production pathways.