How the interactions with humic acids affect the mobility of ionic dyes in hydrogels – Results from diffusion cells

The complexation of charged compounds by humic acids represents the process of exceptional environmental importance. Nevertheless, traditional methods utilized in the complexation studies do not address the way, how these interactions affect the transport of ions in humic-rich environments. To overcome this dilemma, the diffusion cells technique is proposed as an innovative reactivity mapping technique. Using this method, the diffusion of methylene blue was studied in aqueous solutions and in agarose gels with and without the addition of humic acids. Experimental results clearly illustrate the immobilizing effects of humic acids on the transport of methylene blue in gels. The partitioning of methylene blue at the solution-gel interface and the specific interactions between methylene blue and humic acids is discussed on the basis of experimental data. Effective structural parameters of hydrogels (effective porosity, tortuosity factor) were calculated, as well as some standard diffusion and interaction parameters (diffusion and partition coefficients and apparent equilibrium constants).     

Controlled band dispersion for quantitative binding determination and analysis with electrospray ionization‐mass spectrometry

This review discusses recent emerging techniques that have been used to couple flow‐injection analysis (FIA) and electrospray ionization‐mass spectrometry (ESI‐MS) for the quantitation of noncovalent binding interactions. Focus is placed predominantly on two such methods. Diffusion‐based measurements, developed by Konermann and co‐workers, uses controlled‐band dispersion prior to ESI‐MS to determine diffusion constants and binding constants based on the temporal variation of ligand signal measured in the mass spectrum (an indirect technique). Dynamic titration, developed by Schug and co‐workers, is a direct method, where a temporal compositional gradient of a guest molecule is induced in the presence of host in solution to monitor the concentration dependence of complex formation as a function of observed complex ion abundance after ESI‐MS. Further discussion places these techniques in the context of a variety of other direct and indirect ESI‐MS‐based binding determination methods, and highlights advantages, disadvantages, and practical considerations for their proper use to investigate a broad range of macromolecular and small‐molecule interaction systems. © 2009 Wiley Periodicals, Inc., Mass Spec Rev 29:806–829, 2010     

A New and Fast HPLC Method for Determination of Rutin, Troxerutin, Diosmin and Hesperidin in Food Supplements Using Fused-Core Column Technology

A new and fast high-performance liquid chromatography (HPLC) method using fused-core column for separation of rutin, troxerutin, diosmin, and hesperidin has been developed and used for determination of these flavonoids in food supplements. Efficient separation of flavonoids and internal standard methylparaben was achieved on the fused-core column Ascentis Express RP-Amide (100?×?3.0 mm), particle size 2.7 μm, with mobile phase acetonitrile/water solution of acetic acid pH?3 (30:70, v/v) at a flow rate of 1.0 mL?min^?1 and at temperature 50 °C. The detection wavelengths were set at 283 nm for hesperidin and at 255 nm for rutin, troxerutin, diosmin, and internal standard methylparaben. Under the optimal chromatographic conditions, good linearity with correlation coefficients in the range (r?=?0.9991–0.9998; n?=?7) for all flavonoids was achieved. Commercial samples of food supplements were extracted with 100 % dimethyl sulfoxide using ultrasound bath for 10 min and then diluted to methanol. A 5-μL sample volume of the filtered solution was directly injected into the HPLC system. Accuracy of the method defined as a mean recovery of flavonoids from food supplement matrix was in the range 96.2–104.4 % for all flavonoids. The intraday method precision was satisfactory, and relative standard deviations of sample analysis including preparation and determination of different food supplements were in the range 0.5–3.5 % for all flavonoids. The developed method has shown high sample throughput during sample preparation process, modern separation approach, and short time (5 min) of analysis.     

Review of adaptation mechanisms for data-driven soft sensors

In this article, we review and discuss algorithms for adaptive data-driven soft sensing. In order to be able to provide a comprehensive overview of the adaptation techniques, adaptive soft sensing methods are reviewed from the perspective of machine learning theory for adaptive learning systems. In particular, the concept drift theory is exploited to classify the algorithms into three different types, which are: (i) moving windows techniques; (ii) recursive adaptation techniques; and (iii) ensemble-based methods. The most significant algorithms are described in some detail and critically reviewed in this work. We also provide a comprehensive list of publications where adaptive soft sensors were proposed and applied to practical problems. Furthermore in order to enable the comparison of different methods to standard soft sensor applications, a list of publicly available data sets for the development of data-driven soft sensors is presented.     

Nanocomposites of SnO2 and g-C3N4: Preparation,characterization and photocatalysis under visible LED irradiation

Tin dioxide nanoparticles were prepared in the presence of graphitized carbon nitride (g-C₃N₄) forming nanocomposites with different contents of SnO₂ up to 40 %. G-C₃N₄ was synthetized by heating of melamine at 550 °C in the open air and Sn²⁺ ions were precipitated by sodium hydroxide in g-C₃N₄ aqueous dispersions. Resulting mixtures were dried by freezing at ?20 °C and calcined at 450 °C to obtain SnO₂/g-C₃N₄ nanocomposites.The nanocomposites were characterized by common characterization methods in solid state and in their aqueous dispersions using dynamic light scattering (DLS) analysis and photocatalysis. SnO₂ nanoparticles in the nanocomposites were found to have an average size of 4 nm, however, those precipitated without g-C₃N₄ had an average size of 14 nm. Separation of photoinduced electron and holes via heterojunction between SnO₂ and g-C₃N₄ was demonstrated by photocatalytic decomposition of Rhodamine B (RhB) under LED visible irradiation (416 nm) and photocurrent measurements. The most photocatalytically active nanocomposite contained 10 % of SnO₂. Graphitized carbon nitride was assumed to serve as a template structure for the preparation of SnO₂ nanoparticles with a narrow size distribution without using any stabilizing additives.     

Physicochemical Investigation of the Reaction of Components of the Si — Al — O — N — Ti System in the Si3N4 — Al2O3 — AlN — SiO2 — TiN — TiO2 Region. Part 2. Subsystems Si3N4 — AlN,TiN — AlN,Al2O3 — AlN

The reaction of components of the Si — Al — O — N — Ti system in its elements Si ₃N₄ — AlN, TiN — AlN, and Al ₂O ₃ — AlN was investigated by differential thermal and x-ray diffraction analysis. It was established that upon hot pressing mixtures of Si₃N ₄ and AlN (up to 1950°C) free silicon is formed by the decomposition of Si ₃N₄, which reacts with oxygen present as an impurity to form SiO. When TiN reacts with AlN a phase with the spinel structure (Al₂₃O ₂₇N ₅), which can form only in the presence of excess oxygen, appears in addition to the initial components. Spinel is also produced by the reaction of Al ₂O₃ with AlN. In this case a eutectic between Al ₂₃O₂₇N₅ and Al₂O₃ is observed.     

Volatile compounds on the surface and within Iberian dry-cured loin

The profile of volatile compounds from external and internal areas of Iberian dry-cured loin was studied by headspace solid-phase microextraction. Higher levels of 16 volatile compounds (hexane, decane, 3-methylbutanal, several sulphur compounds and some aromatic hydrocarbons) were detected in the outer part of the loins. These differences could be owing to several factors, such as greater exposure to oxygen and dehydration conditions in the surface of the product, which favour oxidation reactions and Strecker degradation of amino acids. Moreover, the addition of spices on the surface and the proximity of a mould layer growing on the surface of the product could also contribute to the higher levels of these compounds on the external layer. However, other sulphur compounds coming from spices showed similar levels on the surface and within the loins. This different behaviour could be a consequence of different diffusion rates depending on the features of the compound and the matrix.     

Fast branch & bound algorithms for optimal feature selection

A novel search principle for optimal feature subset selection using the Branch & Bound method is introduced. Thanks to a simple mechanism for predicting criterion values, a considerable amount of time can be saved by avoiding many slow criterion evaluations. We propose two implementations of the proposed prediction mechanism that are suitable for use with nonrecursive and recursive criterion forms, respectively. Both algorithms find the optimum usually several times faster than any other known Branch & Bound algorithm. As the algorithm computational efficiency is crucial, due to the exponential nature of the search problem, we also investigate other factors that affect the search performance of all Branch & Bound algorithms. Using a set of synthetic criteria, we show that the speed of the Branch & Bound algorithms strongly depends on the diversity among features, feature stability with respect to different subsets, and criterion function dependence on feature set size. We identify the scenarios where the search is accelerated the most dramatically (finish in linear time), as well as the worst conditions. We verify our conclusions experimentally on three real data sets using traditional probabilistic distance criteria.     

Simple On-Line Algorithms for the Maximum Disjoint Paths Problem

In this paper we study the classical problem of finding disjoint paths in graphs. This problem has been studied by a number of authors both for specific graphs and general classes of graphs. Whereas for specific graphs many (almost) matching upper and lower bounds are known for the competitiveness of on-line algorithms, not much is known about how well on-line algorithms can perform in the general setting. The best results obtained so far use the expansion of a network to measure the algorithms performance. We use a different parameter called the routing number that, as we will show, allows more precise results than the expansion. It enables us to prove tight upper and lower bounds for deterministic on-line algorithms. The upper bound is obtained by surprisingly simple greedy-like algorithms. Interestingly, our upper bound on the competitive ratio is even better than the best previous approximation ratio for off-line algorithms. Furthermore, we introduce a refined variant of the routing number and show that this variant allows us, for some classes of graphs, to construct on-line algorithms with a competitive ratio significantly below the best possible upper bound that could be obtained using the routing number or the expansion of a network only. We also show that our on-line algorithms can be transformed into efficient algorithms for the more general unsplittable flow problem.     

Toxicity increases in ice containing monochlorophenols upon photolysis: environmental consequences

The toxic effects of photoproducts formed upon the photolysis of 2- and 4-chlorophenol (CP) frozen solutions in polycrystalline ice phase were determined with a bacterial luminescence test (Vibrio fisheri), and in vitro biomarker assay for dioxin-like effects (inductions of AhR-dependent luciferase in H4IIE-luc cells) and compared to the toxic effects of products of the same photoreaction in aquatic phase. Coupling photoproducts formed in ice samples (3'-chlorobiphenyl-2,4'-diol and 3-chlorobiphenyl-2,2'-diol from 2-CP photolysis and 5-chlorobiphenyl-2,4'-diol from 4-CP photolysis) were found to be more toxic to V. fisheri than parent CPs and elicited significant inductions of dioxin-like effects (the effective concentrations EC50 approximately 3 x 10(-5) mol L(-1) corresponded to known weaker ligands of AhR, such as nonplanar polychlorinated biphenyls or polycyclic aromatic hydrocarbons). To complete the picture, a photoproduct formed from 4-CP (5-chlorobiphenyl-2,4'-diol) was synthesized, and a detailed toxicity assessment with purified compound confirmed the results obtained with irradiated samples. Our findings support a recently proposed model according to which solar radiation can trigger the formation of new types of organic pollutants in polar ice or tropospheric ice cloud particles, presenting possibly greater risk to the environment than the parent compounds.