Toughness in synthetic and biological multilayered systems

Toughness in hard biological tissues is associated with fibrous or lamellar structures that deflect or stop growing cracks. In some cases, such as nacreous shell, protein interlayers absorb much of the crack energy. In other tissues, such as tooth enamel, the toughness derives from the mineral microstructure, and the small amount of residual protein apparently has little effect. There have been a number of efforts to make tough synthetic materials using layered structures. In this work, freeform fabrication has been used to make layered structures with a view to introducing similar toughness into brittle materials. Results are presented for epoxy-glass composites with glass fabric interlayers, porous alumina back-filled with aluminium metal, and layered glass-ceramic/silver materials.     

The thermochemical structure and evolution of Earth's mantle: constraints and numerical models

Geochemical observations place several constraints on geophysical processes in the mantle, including a requirement to maintain several distinct reservoirs. Geophysical constraints limit plausible physical locations of these reservoirs to a thin basal layer, isolated deep 'piles' of material under large-scale mantle upwellings, high-viscosity blobs/plums or thin strips throughout the mantle, or some combination of these. A numerical model capable of simulating the thermochemical evolution of the mantle is introduced. Preliminary simulations are more differentiated than Earth but display some of the proposed thermochemical processes, including the generation of a high-mu mantle reservoir by recycling of crust, and the generation of a high-(3)He/(4)He reservoir by recycling of residuum, although the resulting high-(3)He/(4)He material tends to aggregate near the top, where mid-ocean-ridge melting should sample it. If primitive material exists as a dense basal layer, it must be much denser than subducted crust in order to retain its primitive (e.g. high-(3)He) signature. Much progress is expected in the near future.     

Fourier-Bessel field calculation and tuning of a CW annular array

A 1-D Fourier-Bessel series method for computing and tuning the linear lossless field of flat continuous wave (CW) annular arrays is given and discussed with both numerical simulation and experimental verification. The technique provides a new method for modelling and manipulating the propagated field by linking the quantized surface pressure profile to a set of limited diffraction Bessel beams propagating into the medium. In the limit, these become a known set of nondiffracting Bessel beams satisfying the lossless linear wave equation, which allow us to derive a linear matrix formulation for the field in terms of the ring pressures on the transducer surface. Tuning (beamforming) of the field then follows by formulating a least squares design with respect to the transducer ring pressures. Results are presented in the context of a 10-ring annular array operating at 2.5 MHz in water.     

Nondestructive subharmonic imaging

Ultrasound contrast agent microbubbles are intravascular agents that can be used to estimate blood perfusion. Blood perfusion may be estimated by destroying the bubbles in a vascular bed and observing the refresh of contrast agents back into the vascular bed. Contrast agents can be readily destroyed by traditional imaging techniques. The design of a nondestructive imaging technique is necessary for the accurate quantification of contrast agent refresh. In this work, subharmonic imaging is investigated as a method for nondestructive imaging with the contrast agent microbubble MP1950 (Mallinckrodt, Inc., St. Louis, MO). Optical observation during insonation, in conjunction with a modified Rayleigh-Plesset (R-P) analysis, provides insight into the mechanisms of and parameters required for subharmonic frequency generation. Subharmonic imaging with a transmission frequency that is the same as the resonant frequency of the bubble is shown to require a minimum pressure of insonation that is greater than the experimentally-observed bubble destruction threshold. Subharmonic imaging with a transmission frequency that is twice the resonant frequency of the bubble produces a subharmonic frequency response while minimizing bubble instability. Optimization is performed using optical experimental analysis and R-P analysis     

Remodeling of fibrinogen by endothelial cells in dependence on fibronectin matrix assembly. Effect of substratum wettability

The endothelization of cardiovascular implants is desirable to improve their blood compatibility. The capacity of the endothelial cells to attach, migrate, proliferate and function on the implant surface depends on the presence of matrix proteins such as fibronectin (FN) and fibrinogen (FNG). In this study, we show that the deposition of fibrinogen into extracellular matrix-like structures by human umbilical vein endothelial cells (HUVEC) is dependent on FN matrix formation. We found further that the process of organization of both adsorbed and soluble FN and FNG is dependent on the wettability of materials since it was observed only on a hydrophilic and not on a hydrophobic model surface. ₃ integrin was involved in the process of cell attachment to adsorbed FNG, while the mechanism of FNG fibrillogenesis required the activity of the ₁ integrin. Studies of EC morphology showed the predominant peripheral organization of actin filaments and the formation of distinct leading and trailing cell edges suggesting a motile phenotype of cells when they are seeded on FNG. In summary, we concluded that adsorbed fibrinogen may enhance the motility of HUVEC and that soluble FNG requires FN matrix assembly to be organized in fibrilar structures.     

Evaluation of a program to motivate impaired driving offenders to install ignition interlocks

Approximately 30,000 alcohol ignition interlocks, which are designed to prevent the operation of a vehicle if the driver has been drinking, are in use in the US and Canada. Ignition interlock programs are also being initiated in Sweden and Australia. The best-controlled studies that are currently available suggest that ignition interlocks are effective in reducing impaired driving recidivism while on the vehicle. However, in the US, the practical effectiveness of these devices is limited because only a small number of offenders are willing to install them in order to drive legally. This paper reports on a study of a court policy that created a strong incentive for impaired driving offenders to install interlocks by making traditional penalties, such as jail or electronically monitored house arrest, the alternative to participation in an interlock program. Comparison of the recidivism rates of offenders subject to this policy with offenders in similar, nearby courts, not using interlocks, indicated that the policy was producing substantial reductions in DUI recidivism.     

Reusable platforms for high-throughput on-chip temperature gradient assays

This paper describes a reusable platform that can apply a linear temperature gradient to a lab-on-a-chip device. When a planar microfluidic device with a series of microchannels is placed on top of the platform with the channels perpendicular to the gradient, each channel is held at a discrete temperature. This allows temperature-dependent data for chemical or biochemical species flowed into the device to be obtained in a concurrent fashion. As a demonstration, a melting curve for dsDNA is performed by collecting all the data simultaneously. The gradient is stable enough to easily distinguish between 30-mers where the complement strand contains a single C-A mismatch or a single T-G mismatch or is a perfect match. On the other hand, a temperature gradient can be formed parallel to the direction of flow of the microchannels. This allows the temperature in each channel to vary continuously as the liquid flows downstream. If each microchannel in the array contains a distinct pH value, ionic strength, species concentration, or chemical composition, then a high-throughput two-variable experiment can be performed. We demonstrate this mode of data collection by measuring the fluorescence yield of fluorescein dye molecules in aqueous solution simultaneously as a function of concentration and temperature.     

Design of angle-tolerant multivariate optical elements for chemical imaging

Multivariate optical elements (MOEs) are multilayer optical interference coatings with arbitrary spectral profiles that are used in multivariate pattern recognition to perform the task of projecting magnitudes of special basis functions (regression vectors) out of optical spectra. Because MOEs depend on optical interference effects, their performance is sensitive to the angle of incidence of incident light. This angle dependence complicates their use in imaging applications. We report a method for the design of angle-insensitive MOEs based on modification of a previously described nonlinear optimization algorithm. This algorithm operates when the effects of deviant angles of incidence are simulated prior to optimization, which treats the angular deviation as an interferent in the measurement. To demonstrate the algorithm, a 13-layer imaging MOE (IMOE, with alternating layers of high-index Nb2O5 and low-index SiO2) for the determination of Bismarck Brown dye in mixtures of Bismarck Brown and Crystal Violet, was designed and its performance simulated. For angles of incidence that range from 42 degrees to 48 degrees, the IMOE has an average standard error of prediction (SEP) of 0.55 microM for Bismarck Brown. This compares with a SEP of 2.8 microM for a MOE designed by a fixed-angle algorithm.     

Reverse phase contrast: an experimental demonstration

We present experimental results showing that the reverse phase contrast (RPC) technique is a viable method for the generation of a binary phase distribution from a spatially varying amplitude pattern using Fourier plane filtering techniques. Experimental results are shown for the generation of a binary 0-pi phase only distribution using either an amplitude mask or a spatial light modulator to provide the input and the results are shown to be in agreement with theoretical predictions for the RPC technique.     

Determination of polybrominated diphenyl ethers and polychlorinated biphenyls in human adipose tissue by large-volume injection-narrow-bore capillary gas chromatography/electron impact low-resolution mass spectrometry

A new analytical method has been developed for the quantification of polybrominated diphenyl ethers (PBDEs) in human adipose tissue samples. After Soxhlet extraction and a cleanup procedure using two successive solid-phase extraction cartridges containing acid silica and acid silica: neutral silica:deactivated basic alumina (from top to bottom), detection can been achieved by narrow-bore (0.10-mm i.d.) capillary gas chromatography/electron impact low-resolution mass spectrometry using a large-volume injection technique. Using narrow-bore capillaries, it is possible to analyze complex mixtures in a short time (up to 10 min), saving 50% or more of the analysis time of conventional columns while maintaining a similar resolution power. The method allows the determination of five major PBDE congeners (BDE 28, 47, 99, 100, and 153) at concentrations below 1 ng/g lipid weight. Detection limits in the selected ion mode varied between 0.05 and 0.30 ng/g lipid weight, depending on the degree of bromination. The sensitivity of this method can compete with low-resolution mass spectrometry with electron capture ionization, while a much better selectivity is obtained. Levels of PBDEs in 20 Belgian human adipose tissue samples ranged between 2.18 and 11.70 ng/g lipid weight and were similar to previously reported values from Europe.