High-performance lift augmentation dynamic seals for turbine bearing compartments

Conventional bearing shaft seal systems used in gas turbine engines are often limited to a sliding velocity of about 100 m/s, differential pressure of 3 bar, gas temperature of 300°C and a seal life less than 8000 h. Advanced engines will require bearing shaft seal systems to operate up to sliding velocity of 200 m/s, differential pressure of 6 bar, gas temperature of 500°C and seal life in excess of 30?000 hours. For seals operating in these advanced conditions, a design with no rubbing contact will be required to achieve long life and reliability. A good validated approach is the use of a gas lift augmentation seal. The design objective for a seal of this type is to have the faces of the seal seek an equilibrium position to avoid any contact. The gap must be small enough to ensure a minimal air leakage, but it must be large enough to limit power dissipation, due to shear in the gas film, and face deformation by shaft displacement, misalignment and vibration. Dynamic seals for a bearing compartment have the following main functions: provide static and dynamic sealing in order to prevent oil leakage from the bearing oil compartment to the air compartment and consequently no oil smell pollution by the use of bleed air; control air leakage to the bearing oil compartment in order to improve performance of the engine and to reduce oil consumption; reduce volume of the oil tank and lubrication system and hence provide weight reduction; to operate in extreme conditions of temperature and with normal and reverse pressure; and reduce the mean time between overhaul (MTBO) and have a very long life. Techspace Aero and Burgmann have carried out design, development and testing of lift augmentation carbon seals and demonstrated that high life and performance levels of these seals are possible in a gas turbine engine environment.     

Comparison of a‐Si and Poly‐Si for AMOLED displays

Abstract— The characteristics of OLED backplanes including the intrinsic properties of a‐Si TFTs and LTPS TFTs will be reviewed. While LTPS TFTs reveal satisfactory stability in AMOLED‐display applications, a‐Si AMOLEDs show better uniformity and are capable of driving OLEDs. However, the stability of a‐Si TFTs under long‐term operation is still unacceptable and remains to be the key issue constraining the commercialization of a‐Si TFT AMOLEDs.     

Entropy generation from hydrogen production of catalytic partial oxidation of methane with excess enthalpy recovery

Catalytic partial oxidation of methane (CPOM) is an important route for producing hydrogen and it is featured by autothermal reaction. To recognize the reaction characteristics of CPOM, H₂ production and entropy generation from CPOM in Swiss-roll reactors are studied numerically. The considered parameters affecting the performance of CPOM include the excess enthalpy recovery, gas hourly space velocity (GHSV), number of turns and atomic O/C ratio. The impact of chemical reactions, heat transfer and friction on entropy generation is also analyzed. The results indicate that preheating reactants through waste heat recovery as well as increasing GHSV or number of turns is conducive to enhancing H₂ yield, whereas the maximum H₂ yield develops at O/C = 1.2. A higher H₂ yield is always accompanied by a higher value of entropy generation, and chemical reactions are the main source of entropy generation, especially from steam methane reforming. In contrast, viscous dissipation almost plays no part on entropy generation, compared to heat transfer and chemical reactions. From the analysis of entropy generation, detailed mechanisms of H₂ production from CPOM can be figured out.     

Robust CMAC control schemes for dynamic trajectory following

Abstract

Improved robust CMAC control schemes are proposed for tracing dynamic trajectories in this paper. There are two main structures in the proposed control schemes: one is the robust controller and the other is the improved CMAC network. The robust controller technique can achieve a certain goal without concern for instability of the controlled system in the presence of significant plant uncertainties if the nominal parameter is roughly estimated. Next, in order to reduce the tracing error, a suitable nominal parameter needs to be chosen. Thus, the improved CMAC learning approach under the robust control structure, using the concept of credit assignment, will be employed to determine control variables that can trace other states repeatedly during control processes. Finally, simulation results demonstrate the capability of the proposed control schemes to trace dynamic trajectories.     

Statistically optimised method for detecting adult image groups

Adult image recognition is an important technique for preventing children from accessing offensive material on the Internet. Most of the related works focus on single image recognition. However, adult images usually exist as a group and rarely stand alone. Therefore, considering the entire image group as a whole for classification should be more effective. This paper presents a new method of detecting adult image groups, which aims at achieving optimal recognition accuracy. Adult image group recognition generally includes two components: an adult image recogniser and a final decision rule for classifying the image group. We provide a theoretical analysis to clarify the correlation of the two components and use probability formulae to estimate the recognition rates for different settings of the adult image recogniser and the decision rule. Then, a set of optimal receiver-operating characteristic (ROC) curves for different image numbers is solved. To recognise an unknown image group, a desired recall rate for adult (or benign) image groups is specified and the system is set according to the parameters acquired from the optimal ROC curves. The proposed method can be dynamically adapted to the recall rates that the user expects. This advantage makes the proposed system more suitable for real applications. Our work can be viewed as an extension of single image recognition and the experimental results demonstrate that it can attain higher recognition accuracy than the earlier methods.     

A cross‐cultural comparison of colour emotion for two‐colour combinations

Psychophysical experiments were conducted in the UK, Taiwan, France, Germany, Spain, Sweden, Argentina, and Iran to assess colour emotion for two‐colour combinations using semantic scales warm/cool, heavy/light, active/passive, and like/dislike. A total of 223 observers participated, each presented with 190 colour pairs as the stimuli, shown individually on a cathode ray tube display. The results show consistent responses across cultures only for warm/cool, heavy/light, and active/passive. The like/dislike scale, however, showed some differences between the observer groups, in particular between the Argentinian responses and those obtained from the other observers. Factor analysis reveals that the Argentinian observers preferred passive colour pairs to active ones more than the other observers. In addition to the cultural difference in like/dislike, the experimental results show some effects of gender, professional background (design vs. nondesign), and age. Female observers were found to prefer colour pairs with high‐lightness or low‐chroma values more than their male counterparts. Observers with a design background liked low‐chroma colour pairs or those containing colours of similar hue more than nondesign observers. Older observers liked colour pairs with high‐lightness or high‐chroma values more than young observers did. Based on the findings, a two‐level theory of colour emotion is proposed, in which warm/cool, heavy/light, and active/passive are identified as the reactive‐level responses and like/dislike the reflective‐level response. © 2010 Wiley Periodicals, Inc. Col Res Appl, 2012     

Properties of osteoconductive biomaterials: Calcium phosphate cement with different ratios of platelet-rich plasma as identifiers

This study aims to evaluate further the performance of a platelet-rich plasma (PRP) additive incorporated with calcium phosphate bone cement (CPC) in vitro to prove its efficiency as bone graft substitutes and its compatibility to be incorporated into the CPC with other techniques in clinical restoration in vivo. The growth factor release ability and the osteogenic evaluation of PRP, CPC, and PRP/CPC testing groups with 5, 10, and 15 wt.% PRP were compared in vitro. Four groups were measured using non-decalcified staining methods in vivo, which include the testing group of 10 wt.% PRP/CPC selected from the evaluation in vitro, by using both the autograft with rabbit trabecular and CPC-only as comparison groups and the group without grafting material as the control sample. The results obtained through specimen immersion show that growth factor release and alkaline phosphatase activities after osteoprogenitor cell culture had a significantly better effect on 10 and 15 wt.% PRP/CPC than on the other groups in vitro. Analysis results suggest that PRP was still retained in the CPC matrix even after 32 days of immersion. The results in vivo show that the histology of the autograft bone and the control group without grafting material exhibited fibrous connective and adipose tissues, which obviously filled the created cavity even at nine weeks after the operation. Osteoregeneration was more successful in the PRP-additive group, which accumulated bone remodeling than in the other groups. In conclusion, CPC could be a potential carrier with adequate PRP additives that bear a therapeutic potential for enhanced bone tissue regeneration.     

Process capability analysis chart with the application of Cpm

Process capability analysis (PCA) is a highly effective means of assessing the process ability of product that meets specifications. The process capability analysis chart (PCAC/C_pk ) evaluates the capabilities of multiprocess products together with nominal-the-best specifications, larger-the-better and smaller-the-better specifications. This study proposes process capability analysis chart (PCAC/C_pm ) to consider process yield and expected process loss. A new generated estimator for C_pm is proposed and the properties of statistical estimator and hypothesis test are discussed. A practical example was given for application.