Improvement in shape memory in magnesium niobate modified PZST

A modified lead zirconate stannate titanate system (PZST) has been studied for shape memory effect. Addition of magnesium niobate (MN) slows down the dipole relaxation process, leading to increased (∼3-fold improvement) remnant strain in the PZST system (0.99PZST–0.01PMN). Room temperature X-ray diffraction patterns before poling (antiferroelectric (AFE) tetragonal) and after poling (ferroelectric (FE) rhombohedral), clearly demonstrate that the transition to the ferroelectric phase is stable even in the absence of any electric field. A small applied electric field (∼1.7 kV/cm) in the opposite direction was required to bring the sample back to its original shape. Field-induced strain butterfly loops taken at 50 Hz show that the material response time is quite small.     

Affinity Studies of Hemicyanine Derived Water Soluble Colorimetric Probes with Reactive Oxygen/Nitrogen/Sulfur Species

Peroxynitrite (ONOO^-) is an essential endogenous reactive oxygen species (ROS) generated in mitochondria under various pathological and physiological conditions. An increase in its level in mitochondria is related to numerous diseases. Herein, we report a series of hemicyanine-derived water-soluble colorimetric probes ( 1 – 4 ) and the reactivity of which was studied with various reactive oxygen, nitrogen, and sulfur species. Probes 1 – 4 are formed by conjugating 1,2,3,3-tetramethyl-3H-indolium iodide and 4-hydroxybenzaldehyde or its derivatives through an alkene linkage formed by the Knoevenagel reaction. Oxidative cleavage of the electron-rich double bond of the conjugated hemicyanine dye revealed a discerning affinity of probe 3 towards peroxynitrite among all reactive oxygen species. The rapid change in color of 3 provides a sensitive and selective method for detecting peroxynitrite with a low detection limit of 180 nM. Notably, the water solubility of the probe displays excellent performance for the selective detection of peroxynitrite among ROS and reactive nitrogen (RNS)/sulfur species (RSS). UV-vis, ¹H NMR, and ¹³C NMR spectroscopic data and results from theoretical calculations provide further information on the interaction of peroxynitrite with probe 3 .     

Nonwoven viscose fabric-polyvinyl alcohol based flexible composite

Development of ecofriendly packaging materials is still a challenging area. Researchers are continuously working to improve the mechanical and barrier properties of the different polymers which are used in the packaging industry. Selection of reinforcement and matrix for any composite are based upon end use applications. The novelty of the work is development of fully biodegradable, flexible, lightweight biocomposite by reinforcing needle punched flexible nonwoven viscose fabric to the PVA solution. The effect of PVA concentration and areal density of viscose fabric on the properties of prepared composite is examined. The composite thus prepared is assessed in terms of mechanical, thermal, breathability, and UV blocking properties. The nonwoven viscose-PVA composite shows excellent improvement in tensile strength of 100% to 300% with respect to PVA film of equivalent concentration for two different areal densities of viscose fabric. The composite also exhibits improved thermal stability and UV blocking property with respect to parent components. However, a reduction in flexibility (with respect to PVA film) as well as breathability (with respect to viscose fabric) of the composite is observed. Based upon the improved performance of the viscose-PVA composite in terms of mechanical properties, UV and water vapor permeability, it seems that the composite has a strong potential for application in the packaging sector as a flexible as well as biodegradable composite.     

Mechanical and microstructural investigation of dissimilar joints of Al-Cu and Cu-Al metals using nanosecond laser

Laser beam welding (LBW) has found wide applications in several fields, including electronics, aerospace, and automobile industries, owing to its inherent capabilities over existing welding techniques. Dissimilar laser welding is one of the challenging fabrication processes. However, joining of different materials poses challenging issues because material properties of each material interacts to give rise to hybrid system performance. In present study weld of Al-Cu and Cu-Al has been performed using Ytterbium pulsed fibre laser with a maximum laser power of 300 W. The scanning electron microscope (SEM), and energy dispersive x-ray spectroscopy (EDS) has been employed to investigate the microstructural and chemical composition of the welded joints. The EDS analysis showed the presence of possible intermetallic compounds (IMCs) like AlCu and Cu2Al in the fusion zone. The Al-Cu and Cu-Al welded joints had maximum shear strength of 295 N and 84 N, respectively. The results showed the efficacy of Al-Cu joints over Cu-Al joints. The study further demonstrated that the Al-Cu weld had a better microstructure with fewer pores and cracks than the Cu-Al welds by varying the laser powers.

     

The stochastic aeroelastic response analysis of helicopter rotors using deep and shallow machine learning

Neural Computing and Applications - This paper addresses the influence of manufacturing variability of a helicopter rotor blade on its aeroelastic responses. An aeroelastic analysis using finite...     

M- S-H formation in MgO-SiO2slurries via wet milling for magnesia based castables

It is believed that the formation of hydration phase, MgO-SiO₂-H₂O (M-S-H), contributes to good workability and reliable comprehensive properties for magnesia based castables. In order to stimulate the formation of M-S-H in magnesia based castables and understand the minimum introduction of microslica amount, wet milling process was used to promote the dissolution of MgO and SiO₂ in this work. The slurry containing different content of microsilica with wet milling technology and the castables with/without wet milling slurry were prepared. The effects of microsilica content on the formation of hydration phases were analyzed by XRD, FT-IR and TG/DSC and the properties of magnesia based castables were evaluated by explosion resistance, CMOR, HMOR and so on. The results showed that the formation of M-S-H was accelerated because of the dissolution of Mg²⁺ and HSiO₃^? in wet milling process. Higher amount of M-S-H led to a tight bonding in the early stage, and a denser structure after firing at high temperature due to the limited formation of brucite and in-situ formation of evenly distributed forsterite phase. In addition, much higher HMOR were obtained when less microsilica was added, attributing to the suppressed formation of low-melting-point liquid. Therefore, 2–3 wt% microsilica addition was recommended in this process.     

Is the Jaw Bone Micro-Structure Altered in Response to Osteoporosis and Bisphosphonate Treatment? A Micro-CT Analysis

The aim of the study was to quantify the micro-architectural changes of the jaw bone in response to ovariectomy, exposed or not to bisphosphonate treatment. A total of 47 Wistar rats were ovariectomized (OVX) or sham-operated (shOVX) and exposed to osteoporosis preventive treatment for eight weeks either with bisphosphonates (alendronate, ALN; group OVX-ALN) three days/week at a dose of 2 mg/kg or with saline solution (untreated control condition; group OVX). The bone morphometric parameters of the trabecular jaw bone were assessed using ex vivo micro-computed tomography. The regions of interest investigated in the maxilla were the inter-radicular septum of the second molar and the tuber. The regions quantified in the mandible included the three molar regions and the condyle. A one-way analysis of variance followed by pairwise comparison using Tukey’s HSD and the Games–Howell test was conducted to explore significant differences between the groups. In the maxilla, OVX decreased the bone volume in the inter-radicular septum of the second molar. Bisphosphonate treatment was able to prevent this deterioration of the jaw bone. The other investigated maxillary regions were not affected by (un)treated ovariectomy. In the mandible, OVX had a significant negative impact on the jaw bone in the buccal region of the first molar and the inter-radicular region of the third molar. Treatment with ALN was able to prevent this jaw bone loss. At the condyle site, OVX significantly deteriorated the trabecular connectivity and shape, whereas preventive bisphosphonate treatment showed a positive effect on this trabecular bone region. No significant results between the groups were observed for the remaining regions of interest. In summary, our results showed that the effects of ovariectomy-induced osteoporosis are manifested at selected jaw bone regions and that bisphosphonate treatment is capable to prevent these oral bone changes.     

How to Select Phase Change Materials for Tuning Condensation and Frosting? (Adv. Funct. Mater. 3/2023)

Synthetic surfaces engineered to regulate phase transitions of matter and exercise control over its undesired accrual (liquid or solid) play a pivotal role in diverse industrial applications. Over the years, the design of repellant surfaces has transitioned from solely modifying the surface texture and chemistry to identifying novel material systems. In this study, selection criteria are established to identify bio-friendly phase change materials (PCMs) from an extensive library of vegetable-based/organic/essential oils that can thermally respond by harnessing the latent heat released during condensation and thereby delaying ice/frost formation in the very frigid ambient that is detrimental to its functionality. Concurrently, a comprehensive investigation is conducted to elucidate the relation between microscale heat transport phenomena during condensation and the resulting macroscopic effects (e.g., delayed droplet freezing) on various solidified PCMs as a function of their inherent thermo-mechanical properties. In addition, to freeze protection, many properties that are responsive to the thermal reflex of the surface, such as the ability to dynamically tune optical transparency, moisture harvesting, ice shedding, and quick in-field repairability, are achievable, resulting in the development of protective coatings capable of spanning a wide range of functionalities and thereby having a distinctive edge over conventional solutions.