Stress relaxation behavior of Ti-6Al-4V alloy

1　INTRODUCTIONTi 6Al 4VisoneofthemostimportantTial loys[1,2 ] .Butthisalloyhasbadformabilityforitshighelasticresilience .Therefore ,hotsizingisimpor tant[36 ] .Asthebaseofhotsizing ,thestudyofstressrelaxationhasimportanttheoreticalvalueandpracticalsignificance .Ontheotherhand ,Ti 6Al 4Visusedasfastenermaterialssometimes .Whenthefastenersworkatthetemperaturehigherthanroomtemperature ,stressrelaxationmayresultsinacci dents .Sohowtopreventthestressrelaxationisveryimportant[7] .Uptonow ,…     

INVESTIGATION OF HYDROGEN DISTRIBUTION IN METALS BY TRITIUM AUTORADIOGRAPHY

氚自射线照相法是观察低含量氢微观分布的有效手段之一。本工作利用氚示踪法研究:1.在不同纯度Fe中氢的分布规律;2.在局部应力状态下氢的扩散行为;3.在液相烧结钨合金中氢的分布;4.氢在堆焊接头不同区域的分布特征。实验结果表明,氢的分布特性与相结构、应力状态和碳陷阱有关。     

新型缓蚀剂TG500在高CO2和Cl-环境中的缓蚀行为

在高温高压高CO2和Cl^-环境中，用静态高温高压模拟试验方法对不同浓度的TGS00新型咪唑啉季铵盐缓蚀剂进行了缓蚀效率测试．结果表明，TGS00缓蚀效率随加入量增加而增加，浓度增加到0．3g／L后，缓蚀速率提高不明显．同时研究N80套管钢表面的腐蚀产物，缓蚀剂浓度较低时，以均匀腐蚀为主，加入量提高到0．3g／L时，除局部少量点蚀外，无其它明显腐蚀特征．     

APPLICATION OF MOLECULAR ORBITAL THEORY TO ANALYSIS OF PHASE STABILITY FOR ALLOYS

The critical _d vahues ( _ ) of the γ/(γ+σ).γ/(γ+μ) and γ/(γ+γ') phase boundaries insome ternar alloy phase diagrams at various temperatures are calculated by averaging the _d values of sererai selected characteristic points at the phase boundaries.Approxmateequations for the temperature dependence of the critical _d of γ/(γ+σ).γ/(γ+μ) andγ/(γ+γ') phase boundaries are established.The accuracy of the analysis is discussed in detail.It is found for the first time that the average value of the bondorder _ at the phase boundaries ts also approximatelr a constant and therefore a criticalaverage bond order _ like - can be introduced for the analysts of phase stability     

BEHAVIOR OF Mg AND ITS EFFECT ON MECHANICAL PROPERTIES OF CAST Fe_3Al ALLOYS

Proper addition of 0.002 wt-% Mg to cast Fe_3Al alloy may obviously improve the room andhigh temperature tensile properties.Auger spectra show that Mg segregates near grainboundaries as very thin layers.Observation under TEM reveals that a suitable amount of Mgenhances ability of cooperative internal deformation so that the dislocations will ease the con-tinuous slip deformation through grain boundaries.The fracture feature of Fe_3Al alloy is oftransgranular cleavage at room temperature and cracks initiate at grain boundaries.     

Microstructures and Plastic Anisotropy of As—Cast Low Carbon Steel Strips

对比研究了低碳钢带铸材不同处理状态钢带和薄板铸坯中不同位置切片的组织特征、晶体学织构和15％工程应变条件下的塑性异向性．结果表明，带铸材试样中存在{111}与{114}特征织构，织构强度均较弱；铸坯切片中存在{111}与{001}特征织构，并且因局部凝固冷速不同存在明显的织构强度差异．两组低碳钢的法向异向性与平均晶粒尺寸的对数之间尽管均存在线性关系，但斜率明显不同．分析表明法向异向性的晶粒尺寸依存性与钢带中织构的强弱有关，由此提出了“有效织构强度比”的概念，从塑性变形理论的角度解释了微观组织对塑性异向性的影响．     

伊利石在铝酸钠溶液中的反应脱硅过程研究

为了更清楚地了解伊利石在拜耳法溶出过程中的反应行为，本文对伊利石在合成铝酸钠溶液中的溶出动力学进行了研究，测得其活化能为114，73kJ/mol。并研究了溶液苛性碱浓度对伊利石的反应速率的影响；添加石灰可以有效的增加伊利石的反应率，提高脱硅效率。为拜耳法生产氧化铝的脱硅过程及防止结疤提供理论依据。     

钼塑性变形抗力数学模型的研究

在Gleeble-1500热模拟试验机上,对钼板进行塑性变形抗力的研究。通过不同的变形温度、应变速率和应变对变形抗力的影响,分析了钼的高温变形特征,并对钼板进行塑性变形抗力的研究,进而采用非线性回归方法建立了钼板的变形抗力模型。通过理论计算与实测值进行对比,证明此模型有较好的线性拟合性。     

Preparation and mechanical properties of Fe_3Al/Al_2O_3 nano-/micro-composite

1　INTRODUCTIONAlumina(Al2 O3)ceramicsareoftenconsideredforstructuralapplications,duetotheirpropertiesofhighhardness ,chemicalandwearresistanceandgoodmechanicalpropertiesatroomandhightemperature .Thewellknownlimitationfortheseceramics ,how ever ,istheverylowtoughness .Recentstudieshaveshownsignificantimprovementsinmechanicalprop erties ,includingtoughness ,byaddingductilesecondphaseparticles ,suchasNi,Al,MoandCu[14 ] .Anincreaseof 80 % 333%inthefracturetoughnesshasbeenreportedforAl2 O3…     

水基淬火液用于汽车轴管零件的淬火冷却

在分析几种淬火液的基础上 ,选用冷却速度与快速淬火油相近的FEROQUENCH 2 0 0 0淬火液用于轴管淬火冷却 ,淬火后的轴管彻底消除了淬火裂纹 ,而且改善该零件热处理后的力学性能。