Growth, Band Structure and Optical Properties of LiSrBO3 Crystal

The bulk crystal of LiSrBO3 (8.39 g) with a size of 21mm×20mm×15mm was grown by high temperature solution growth method. The relationship between growth habit and crystal structure was discussed. The transmission spectrum shows an UV absorption edge at about 300 nm. The melting temperature of this crystal was determined to be 942 ℃ by DTA-TG measurement. The band structure of the LiSrBO3 crystal was studied by means of the first principle method. An indirect band gap was found to be about 4.0 eV,and a low dielectric constant was estimated to be about 1.9 in terms of theoretical results.     

一种新的判断高分子相容性的粘度判据

依据最近提出的高分子稀溶液粘度的浓度 依赖性的团簇理论 ,对高分子‘理想混合物’的定义进行了更新的理论分析 .在此基础上提出了一个新的判定高分子相容性的粘度判据 .从现有的大量实验数据看 ,该判据是和事实相符合的     

水合醋酸铈直接热分解制备超细氧化铈及其抛光性能

Ultra fine ceria was prepared by calcining hydrate cerium acetate. The effects of pyrolysis temperature on the particle size, morphology, specific surface area and loose packing density of ceria were investigated, and the removal rate of optical glasses polishing by ceria was determined. The results show that with the increase of pyrolysis temperature, the loose deposit density and crystallinity increases and the specific surface area decreases, however, the particle size decreases firstly and then increases, the minimum medium particle size D₅₀ is 0.47 μm at pyrolysis temperature of 1 000 ℃. The SEM images of ceria prepared by the decomposition at 800 ℃ or at 1 100 ℃ show porous powders or quasi-sphere small particles with loosely agglomeration, respectively. It was found that the removal rate varied with pyrolysis temperature in preparation of ceria and the property of glass polished. The removal rate for three kinds of glasses was in the order of ZF7> F1> K9, and the maximum value appeared at around 1 000 ℃ for ZF7 and F1, and at around 1 100 ℃ for K9.     

Dy对Pt—Dy／Al2O3催化剂表面吸附中心性质及其催化性能的影响

通过脉冲微型反应催化色谱装置，考察了正己烷在Ｐｔ／Ａｌ２Ｏ３和Ｐｔ－Ｄｙ／Ａｌ２Ｏ３催化剂上的转化反应：用ＴＰＤ、ＴＰＲ和ＨＯＴ技术研究了Ｐｔ－Ｄｙ／Ａｌ２Ｏ３催化剂的表面性质。     

二点滴定法研究

就二点滴定法的原理，方法和应用进行了讨论，导出了二点滴定法计算公式。讨论了滴定剂加入量与测定结果准确度的关系。已用本法对标样样液及试样进行了多次测定，测定结果相对误差及相对标准偏差约０．２％。本法简便，快速，准确，且昨达于任何滴定类型的通用方法。     

聚(二甲基硅氧烷-co-甲氧基十二烷基硅氧烷)在棉纤维及其他模型表面的膜形貌及定向排列方式

用场发射扫描电镜(FESEM)、原子力显微镜(AFM)、光电子能谱(XPS)等仪器研究了棉纤维以及再生纤维素表面聚(二甲基硅氧烷-co-甲氧基十二烷基硅氧烷)(DDPS)的膜形貌及其定向排列方式.结果发现,在天然棉纤维以及再生纤维素模型表面,DDPS均能形成宏观上平滑、而微观形态学实则非均一的疏水性硅膜,表明DDPS的定向排列成膜方式为疏水性硅甲基、硅十二烷基朝外伸向空气,硅氧偶极键指向基质界面.     

用高分辨质谱研究二茂铁类化合物

研究了八种N－二茂铁甲基苯胺衍生物的电子电离质谱（EI－MS），并与快原子轰击质谱（FAB－MS）作了比较，讨论了这些化合物的质谱特征。通过精确质量测量，确认了M^ -2 OH离子，并采用碰撞诱导裂解（CID）探讨了化合物质谱中主要离子间的关系。     

A Structure-activity Relationship （SAR） Study of Fluoroquinolones with Biological Activity against Anti-S.pneumoniae

1INTRODUCTION Streptococcus pneumoniae is a key pathogen in many respiratory tract infections.In a Canada-wide surveillance study published in1999,it was reported that21.2%of pneumococcal tested were interme-diately susceptible or resistant to penicillin.As the newer respiratory fluoroquinolones are active aga-inst both penicillin-susceptible and penicillin-resis-tant isolates of S.pneumoniae,they will be increa-singly important in the future treatment of infections caused by this pathoge…     

簇离子Mo_3S_4M~（n＋）中M与Mo成键作用及电子光谱（M＝Fe、Ni，n＝4；M＝Cu，n＝5）

应用ＩＮＤＯ／Ｓ半经验量子化学方法，对簇合物离子Ｍｏ３Ｓ和Ｍｏ３Ｓ４Ｍｎ＋（Ｍ＝Ｆｅ、Ｎｉ，ｎ＝４；Ｍ＝Ｃｕ，ｎ＝５）分别进行分子轨道计算。根据计算得到的簇离子中的原子表观电荷和成键指标，说明Ｆｅ、Ｎｉ、Ｃｕ＋与Ｍｏ３Ｓ成键作用的相对强度依次是Ｆｅ－Ｍｏ＞Ｎｉ－Ｍｏ＞Ｃｕ＋－Ｍｏ。比较了用含组态作用的ＩＮＤＯ／Ｓ方法计算得到的电子跃迁能与实验得到的电子吸收光谱值，并讨论了吸收峰归属情况。对于Ｍ为Ｆｅ、Ｎｉ的簇离子Ｍｏ３Ｓ４Ｍ４＋，最低能量的电子跃迁吸收峰起源于异金属间电荷转移跃迁（ＭＭ’ＣＴ）；而Ｍｏ３Ｓ４Ｃｕ（５＋）簇离子观察到的吸收峰主要是Ｍｏ３Ｓ芯的局域内电荷转移跃迁。根据理论计算结果，由Ｃｕ＋离子到Ｍｏ３Ｓ的电荷转移跃迁谱线，大约在４６０００ｃｍ－１以上才能观察到吸收峰。从Ｍｏ３Ｓ４Ｆｅ４＋次低能量吸收峰的实验值１６６００ｃｍ－１和理论值１６５００ｃｍ－１与Ｍｏ３Ｓ的最低能量吸收峰的实验值１６６００ｃｍ－１和理论值１６９００ｃｍ－１比较，表明无论从理论上或实验上都能证实簇离子Ｍｏ３Ｓ４Ｆｅ４＋在能量为１６６００ｃｍ－１处的吸收峰是起因于Ｍｏ３Ｓ芯的局域内电荷转移跃迁。     

原位Cu(Ⅰ)催化的叠氮-炔环加成反应合成长链双功能分子：蓝萼甲素与生物素的长链轭合分子的制备（英文）

新型生物素标记的蓝萼甲素可以作为潜在的、基于生物活性的靶标蛋白质的探针.利用原位Cu(I)催化的叠氮-炔环加成反应,以高区域选择性和较高收率合成了系列蓝萼甲素的生物素长链轭合分子.研究发现,在优选的反应条件下,原位还原生成的Cu(I)可以很好地被溶剂化,从而展现了高催化活性.本方法较好地解决了针对双长链的叠氮-炔环加成收率普遍较低的问题,简便,条件温和,同样适用于其他以三氮唑链接的长链双功能分子的合成.