Low cycle fatigue behaviors of elbow pipe with local wall thinning

Low cycle fatigue tests were conducted using 100A elbow specimens made of STPT410 carbon steel with local wall thinning. Local wall thinning by erosion/corrosion was simulated by machined pipe wall thinning. The local wall thinning areas were located at three different areas, called extrados, crown and intrados. The elbow specimens were subjected to cyclic in-plane bending under displacement control without internal pressure. The effects of eroded conditions, such as eroded ratio, eroded angle and position, on the low cycle fatigue behavior and fatigue life were discussed by using experimental results and finite element analyses. Also the location of crack initiation and the crack growth direction could be predicted by three dimensional elasto-plastic finite element analyses. In addition, the safety margin of eroded elbows against seismic loading was discussed by comparing the fictitious stress of elbows with the allowable stress limit demanded by the design code.     

Return Link Systems for Wireless Mobile Camera Using 42 GHz-Band with Frequency and Space Diversity Techniques

In this paper, return link systems for wireless mobile camera using 42 GHz-band in multipath fading environments are proposed. The return link systems for wireless mobile camera require wireless transmission with high reliability as same as the conventional wired camera systems. The proposed return link systems achieve transmission with high reliability by taking into consideration frequency and space diversity techniques. The proposed systems can be classified as 3 three types of return link systems according to diversity techniques： FD （frequency diversity） systems, SD （space diversity） systems and FD＋SD system （frequency and space diversity）. Computer simulations are carried out in order to confirm the effectiveness of the proposed return link systems. It is confirmed that the proposed three types of return link systems have an advantage about BER performances and effectively exploit frequency and space resources.     

Enhanced activity and stability of Pt/C fuel cell anodes by the modification with ruthenium-oxide nanosheets

Ruthenium-oxide nanosheet (RuO₂ns) crystallites with thickness less than 1 nm were prepared via chemical exfoliation of a layered potassium ruthenate and deposited onto carbon supported platinum (Pt/C) as a potential co-catalyst for fuel cell anode catalysts. The electrocatalytic activity towards carbon monoxide and methanol oxidation was studied at various temperatures for different RuO₂ns loadings. An increase in electrocatalytic activity was evidenced at temperatures above 40 °C, while little enhancement in activity was observed at room temperature. The RuO₂ns modified Pt/C catalyst with composition of RuO₂:Pt = 0.5:1 (molar ratio) exhibited the highest methanol oxidation activity. CO-stripping voltammetry revealed that RuO₂ns promotes oxidation of adsorbed CO on Pt. In addition to the enhanced initial activity, the RuO₂ns modified Pt/C catalyst exhibited improved stability compared to pristine Pt/C against consecutive potential cycling tests.     

Quantitative separation of antioxidant pigments in purple sea urchin shells using a reversed-phase high performance liquid chromatography

Sea urchin shells are generally discarded as food waste after removal of edible gonads, although they possess significant amount of polyhydroxylated naphtoquinone pigments having potent antioxidant property. In this study, separation and quantification of the pigment mixtures from purple sea urchin shells were performed using a C18 reversed-phase HPLC with isocratic elution of 50% mixture of solvent (A) formic acid: water (0.1: 100, v/v) and solvent (B) MeOH: acetonitrile (5: 9, v/v) at a flow rate of 0.5 mL/min. The pigment mixtures were separated into four major peaks in 30 min, which assumed to be spinochromes A, B and C and echinochrome A on the basis of UV-Vis absorption spectra obtained by a diode array detector. LC-MS analysis also supported these results by producing the predominant base peaks at m/z 221.1, 279.1, 265.1, and 263.1 corresponding to the pseudomolecular ions [M-H]⁻ of the respective compounds. The HPLC method also showed good correlations (r² > 0.98) between injected amounts of these pigments and peak areas recorded at 340 and 520 nm. These results indicated that the HPLC method developed in this study would be applicable for the separation and quantification of these major pigments in sea urchin shells.     

The electrical delivery of a sublimable II–VI compound by vapor transport in carbon nanotubes

Progress in the field of femtogram (10⁻¹⁵ g) mass delivery relies on finding dependable transport vehicles and uncomplicated methods to tailor the deposition of active substances. Here, current-conductive containers consisting of turbostratic carbon nanotubes were used to store a light-emitting ternary alloy and guide its delivery on demand. We found that the electrically-activated delivery process of this sublimable compound, performed inside a transmission electron microscope, was highly dependent on factors such as the substrate type and current injection mode. Furthermore, our observations suggest that the alleged “missing matter” problem is not solely due to surface migration. Besides extending the field of electrical delivery to the realm of functional materials, the extrusion and mass transport of a sublimable II–VI compound demonstrates that it is possible to guide vapor migration using a carbon nanotube support.     

Electrochemical performance of carbon-coated lithium manganese silicate for asymmetric hybrid supercapacitors

Nanoscale carbon-coated Li₂MnSiO₄ powder is prepared using a conventional solid-state method and can be used as the negative electrode in a Li₂MnSiO₄/activated carbon (AC) hybrid supercapacitor. Carbon-coated Li₂MnSiO₄ material presents a well-developed orthorhombic crystal structure with a Pmn2₁ space group, although there is a small impurity of MnO. The maximum specific capacitance of the Li₂MnSiO₄/AC hybrid supercapacitor is 43.2 F g⁻¹ at 1 mA cm⁻² current density. The cell delivers a specific energy as high as 54 Wh kg⁻¹ at a specific power of 150 W kg⁻¹ and also exhibits an excellent cycle performance with more than 99% columbic efficiency and the maintenance of 85% of its initial capacitance after 1000 cycles.     

Thermal performance of a packed bed reactor for a high‐temperature chemical heat pump

The thermal performance of a chemical heat pump that uses the reaction system of calcium oxide/lead oxide/carbon dioxide, which is developed for utilization of high‐temperature heat above 800°C, is studied experimentally. The thermal performance of a packed‐bed reactor of a calcium oxide/carbon dioxide reaction system, which stores and transforms a high‐temperature heat source in the heat pump operation, is examined under various heat pump operation conditions. The energy analysis based on the experiment shows that it is possible to utilize high‐temperature heat with this heat pump. This heat pump can store heat above 850°C and then transform it into a heat above 900°C under an approximate atmospheric pressure. An applied system that combines the heat pump and a high‐temperature process is proposed for high‐efficiency heat utilization. The scale of the heat pump in the combined system is estimated from the experimental results. Copyright © 2001 John Wiley & Sons, Ltd.