Dynamic Power Integrity Control of ATE for Eliminating Overkills and Underkills in Device Testing

This paper proposes a power integrity control technique for dynamically controlling power supply voltage fluctuations for a device under test (DUT), and demonstrates its effectiveness for eliminating the overkills/underkills due to the difference of power supply impedance between an automatic test equipment (ATE) and a practical operating environment of the DUT. The proposed method injects compensation currents into the power supply nodes on the ATE system in a feed-forward manner such that the ATE power supply waveform matches with the one on the customer’s operating environment of the DUT. A method for calculating the compensation current is also described. Experimental results show that the proposed method can emulate the power supply voltage waveform under a customer’s operating condition and eliminate 95 % of overkills/underkills in the maximum operating frequency testing with 105 real silicon devices. Limitations and applications of the proposed method are also discussed.     

Estimating the creep behavior of polycarbonate with changes in temperature and aging time

Thermoplastic resins are typically used without any kind of physical aging treatment. For such materials, creep behavior and physical aging, which depend on time and temperature, occur simultaneously. The effects of these processes are evident after quenching and are recorded in the material as a thermal history. This history strongly influences mechanical properties and creep behavior in particular. Thus, a more thorough understanding of the physical aging process is desirable. We examined the creep deformation of polycarbonate (PC) to reveal the effects of physical aging on creep behavior. The effects were dependent on both time and temperature. The relationship between physical aging and creep behavior exemplified superposition principles with regard to time and both pre-test aging time and pre-test aging temperature. The superposition principles allowed the calculation of creep deformations at a given temperature; the calculated results were corroborated by experimental data.     

Energy Savings through Microwave Selective Heating of Pd/AC Catalyst Particulates in a Fixed‐Bed Reactor

Microwave radiation is a novel energy source to drive chemical reactions. In conventional reactors, however, the heat created either escapes through uninsulated reactor walls, or the microwave radiation is attenuated by insulated walls. Here, microwave selective heating of Pd catalyst particles supported on activated carbon particulates was examined in a fixed‐bed reactor using a novel vacuum‐filled Dewar‐like double‐walled continuous‐flow reactor. This reactor was developed toward energy savings in performing such organic reactions as the transformation of the hydride methyl cyclohexane to toluene.     

Acidic property of BEA zeolite synthesized by seed-directed method

The acidic property of a BEA zeolite prepared by a seed-directed synthesis (SDS) method without organic structure directing agent (OSDA) was analyzed by a method of ammonia infrared/mass spectroscopic temperature-programmed desorption. The number of Brønsted acid sites on the SDS-BEA zeolite was larger than that on a conventional BEA zeolite synthesized from using OSDA. The enthalpy of ammonia desorption, distributed mainly in a range between 115 and 145 kJ mol^?1, was in agreement with the acid strength region generated by isomorphous substitution of Si⁴⁺ by Al³⁺ in the BEA framework. These observations confirm that the microstructure around the incorporated Al in the SDS-BEA zeolite was equivalent to that in the conventional one.     

Focal calcium monitoring with targeted nanosensors at the cytosolic side of endoplasmic reticulum

Ca²⁺ distribution is spatially and temporally non-uniform inside cells due to cellular compartmentalization. However, Ca²⁺ sensing with small organic dyes, such as fura-2 and fluo-4, has been practically applied at a single cell level where the averaged signal from freely diffusing dye molecules is acquired. In this study, we aimed to target azide-functionalized fura-2 (N₃-fura-2) to a specific site of subcellular compartments to realize focal Ca²⁺ sensing. Using scAVD (single-chain avidin)–biotin interaction and a copper-free click reaction system, we linked N₃-fura-2 to specifically-targeted scAVD protein fused with a red fluorescent protein mCherry, so that Ca²⁺ sensors conjugated with four N₃-fura-2 dyes with dibenzocyclooctyne (DBCO)-PEG4-biotin as a linker were generated at subcellular compartments in living cells. In cytoplasm, N₃-fura-2 showed a prolonged retention period after binding to scAVD. Furthermore, the reacted N₃-fura-2 was retained inside cells even after free dyes were washed out by methanol fixation. When scAVD was overexpressed on endoplasmic reticulum (ER) membranes, N₃-fura-2 was accumulated on ER membranes. Upon histamine stimulation, which increases cytosolic Ca²⁺ concentration, ER-localized N₃-fura-2 successfully sensed the Ca²⁺ level changes at the cytosolic side of ER membrane. Our study demonstrated specific targeting of N₃-fura-2 to subcellular compartments and the ability of sensing focal Ca²⁺ level changes with the specifically targeted Ca²⁺ sensors.     

Acceleration of the Rate of Silver Nanoparticle Formation Using Microbubbles in a Sonochemical Process

The effect of the addition of microbubbles on the formation of silver nanoparticles produced in an ultrasonic radiation-mediated process was investigated. The addition of microbubbles with an area-based median diameter of 26.0?µm and a bubble volume density of 0.18?cm³/L significantly increased the silver nanoparticle formation rate during the sonochemical process. The size distribution of the silver nanoparticles was largely unaffected by the addition of the microbubbles. The influence of changes in the microbubble volume density on the formation of the silver nanoparticles was also investigated; it was confirmed that the rate of formation of the silver nanoparticles increased moderately with increasing volume density. The gradient in absorption spectra was approximately 30 times larger for the case when microbubbles (median diameter: 28.3?µm) were added at 0.74?cm³/L, compared with the case without microbubbles. The results suggested that the microbubbles provided reaction sites similar to cavitation bubbles in the ultrasonic reaction.     

Present Status of the Nd:YAG Thomson Scattering System Development for Time Evolution Measurement of Plasma Profile on Heliotron J

A new high repetition rate Nd:YAG Thomson scattering system is developed for the Heliotron J helical device.A main purpose of installing the new system is the temporal evolution measurement of a plasma profile for improved confinement physics such as the edge transport barrier (H-mode) or the internal transport barrier of the helical plasma.The system has 25 spatial points with ～10mm resolution.Two high repetition Nd:YAG lasers (>550mJ@ 50Hz) realize the measurement of the time evolution of the plasma profile with ～10ms time intervals.Scattered light is collected by a large concave mirror (D=800 mm,f/2.25) with a solid angle of ～100 mstr and transferred to interference filter polychromators by optical fiber bundles in a staircase form.The signal is amplified by newly designed fast preamplifiers with DC and AC output,which reduces the low frequency background noise.The signals are digitized with a multi-event QDC,fast gated integrators.The data acquisition is performed by a VME-based system operated by the CINOS.