Bestimmung der Abtragungsraten von Zirconium,Tantal und der Legierung Tantal-40Niob in fluoridhaltiger azeotroper Salpetersäure mit Hilfe der Radiotracer-Methode

The radiotracer technique as a means to investigate the corrosion of zirconium, tantalum, and a Ta-40Nb alloy in fluoride containing azeotropic nitric acid Zirconium and tantalum as well as the tantalum 40% niobium alloy are of considerable technical importance due to their high corrosion resistance against numerous corrosive media. With respect to corrosion testing in analytically pure azeotropic nitric acid in the temperature range between 20 and 121°C, corrosion rates were determined for zirconium: 7 · 10^?6 to 5 · 10^?4 mm/y, for tantalum: 10^?8 to 4 · 10^?6 mm/y, and for the Ta-40Nb alloy: 2 · 10^?7 to 8 · 10^?6 mm/y [1]. These corrosion rates will be markedly increased by adding small amounts of fluorides or by fluoride impurities. The radiotracer method after neutron activation was applied to determine the corrosion rates in azeotropic fluoride containing nitric acid. Even minute additions of fluorides strongly affect the corrosion resistance of zirconium. In the range between 0.15 and 10 ppm F^? and at a temperature of 108°C, corrosion rates between 5.3 · 10^?3 and 3.1 mm/y were measured. It was impossible to establish a limit for the fluoride concentration, below which the corrosion rate of zirconium will not be adversely influenced. The corrosion rates of tantalum and the Ta-40Nb alloy are considerably increasing above a fluoride concentration of 10 ppm. The highest corrosion rates measured were between 8.4 · 10^?3 mm/y at 50°C/280 ppm F^? and 1.4 · 10^?2 mm/y at 110°C/320 ppm F^?. Within the range of this investigation, the corrosion resistance of tantalum was higher than that of the Ta-40Nb alloy by one order of magnitude. The corrosion resistance of zirconium and tantalum was not influenced by any treatment of the samples before testing.     

An EKV-based high voltage MOSFET model with improved mobility and drift model

An EKV-based high voltage MOSFET model is presented. The intrinsic channel model is derived based on the charge based EKV-formalism. An improved mobility model is used for the modeling of the intrinsic channel to improve the DC characteristics. The model uses second order dependence on the gate bias and an extra parameter for the smoothening of the saturation voltage of the intrinsic drain. An improved drift model [Chauhan YS, Anghel C, Krummenacher F, Ionescu AM, Declercq M, Gillon R, et al. A highly scalable high voltage MOSFET model. In: IEEE European solid-state device research conference (ESSDERC), September 2006. p. 270–3; Chauhan YS, Anghel C, Krummenacher F, Maier C, Gillon R, Bakeroot B, et al. Scalable general high voltage MOSFET model including quasi-saturation and self-heating effect. Solid State Electron 2006;50(11–12):1801–13] is used for the modeling of the drift region, which gives smoother transition on output characteristics and also models well the quasi-saturation region of high voltage MOSFETs. First, the model is validated on the numerical device simulation of the VDMOS transistor and then, on the measured characteristics of the SOI-LDMOS transistor. The accuracy of the model is better than our previous model [Chauhan YS, Anghel C, Krummenacher F, Maier C, Gillon R, Bakeroot B, et al. Scalable general high voltage MOSFET model including quasi-saturation and self-heating effect. Solid State Electron 2006;50(11–12):1801–13] especially in the quasi-saturation region of output characteristics.     

Packaging production and consumption in the world and in some industrialized countries

This paper reports on statistics concerning production and consumption of packaging (as a whole or per capita) in Europe, in the USA, in Japan and in the world. Data have been provided by National Trade Associations and by consultants specialized in packaging and in economics. It is estimated that in 1986 the global consumption of packaging reached 150 millions of tonnes valued at 1200 billions of French francs. Consumption could reach 247 million tonnes by the year 2000. Paper and board have the highest consumption rate, but plastics have the highest rate of growth. Nevertheless, consumption per capita in the industrialized countries will be more than 10 times the consumption in underdeveloped countries. The packaging industries take fourth place in the USA, sixth in Western Germany and twelfth in France. In Europe, as in the world, paper and board is the material most used (40%), with glass (a high density material) taking second place and plastics third, i.e. if we consider the quantity of materials and not their value. Some differences appear between the various countries, but the figures for USA and Japan lead to similar conclusions. The survey shows clearly that the USA as compared with Europe has twice the consumption of packaging materials per capita and this difference is even greater compared with the rest of the world.     

Adsorption des acides humiques sur charbon active en poudre. Influence du triphosphate de sodiumAdsorption of humic acids onto powdered activated carbon. The influence of sodium triphosphate

The use of activated carbon beds for the removal of natural humic and fulvic substances found in water supplies, has recently received considerable attention in water treatment operation (Lee et al., 1980; Le Cloirec et al., 1983). Moreover, the use of carbon adsorption for the reduction of haloform precursors (Anderson et al., 1981) and trihalomethanes produced by chlorination process, has contributed to a comprehensive investigation of adsorption characteristics of natural organic compounds (McCreary and Snoeyink, 1981). Many recent works showed the influence of adsorption system characteristics, such as pH, salt type, salt concentration and ionic heterogeneity in multicomponent adsorption systems, on the removal efficiency of humic and fulvic substances by activated carbon (McCreary and Snoeyink, 1980; Randtke and Jepsen, 1982; Weber et al., 1983). The purpose of this study is to examine the effect of a main component of domestic detergents, sodium triphosphate (STP), on the adsorptive capacities of powdered activated carbon (PAC) for commercially supplied humic acids, at different pH values in distilled water. Also, the effect of STP concentration and pH on the adsorption affinity of the PAC for humic acids, is discussed in relation with electrokinetic properties of carbon particles (zeta potential measurements).A first batch equilibrium study (Figs 1 and 2), showed an effective enhancement of adsorption capacity for humic acids as a function of STP concentration, in a non buffered media (pH of distilled water, close to 5.0). For example, visible absorption analysis of humic acids indicates an increase of 93% (500 mg l^?1 PAC) and 133% (1000 mg l^?1 PAC) in the carbon adsorption efficiency for a STP concentration from 0.2 to 1.0mM. A second batch equilibrium study (Figs 3 and 4) led to adsorption isotherms for humic acids in distilled water, as a function of STP concentration and initial pH value of the non buffered multicomponent system. Freundlich isotherms showed an increase in the adsorption capacity of the PAC for humic acids, with a decrease in pH and an increase in STP concentration. However, the adsorption capacity for humic acids is quite reduced at high pH values in presence of STP, in comparison with results obtained with distilled water.Electrokinetic measurements on PAC suspensions (Fig. 5) indicates that both humic acids and STP induce a negative variation of the zeta potential of carbon particles. In such a binary system, the zeta potential is a linear function of the pH; the negative surface charge of the carbon increasing with an elevation of pH (Fig. 6). Therefore, it appears that some adsorption of triphosphate polyanion from solution could occur, contributing then to the apparent negative surface charge of PAC particles.It has been previously showed that the type of anion in sodium salts, had little effect on the enhancement of adsorptive capacities of activated carbon for humic substances (Lafrance and Mazet, 1985), due to Na⁺ ions. However, adsorption of TP anions on the carbon surface may produce a source of repulsive charges, unfavourable to the co-adsorption of humic acids as the pH of the binary system reach more basic conditions. The influence of possible electrostatic interactions between adsorbates at the carbon surface, on the adsorption efficiency for humic acids, could then be studied by zeta potential measurements of PAC particles during the adsorption process.     

Thoracoscopic treatment of mediastinal cysts in children

BACKGROUND/PURPOSE: The development of thoracoscopic surgery has made many procedures possible, including the treatment of mediastinal cysts in children. The authors report their experience with this procedure between 1992 and 1997. METHODS: Surgery was performed on 22 children aged from 1 month to 9 years (median, 27 months), weighing 5 to 49 kg (median, 12.5 kg). Diagnosis was made by antenatal ultrasound scan in six cases (27%), with a chest x-ray performed for respiratory symptoms in 14 cases, and with a chest x-ray performed for positive tuberculin intradermoreaction in two cases. Decision to resect the cyst was determined by thoracoscopy in 21 of the 22 cases, and by open surgery in one case only (subcarinal compressive cyst with left lung distension and a mediastinal shift). RESULTS: Eighteen of the 21 (86%) cases were treated successfully by thoracoscopy. In three cases of bronchogenic cysts, we performed an associated thoracotomy because the dissection was too difficult and dangerous. In three cases, a small part of a common wall between the cyst and the bronchus was not removed. The pathological diagnosis was bronchogenic cysts in 15 cases (71%), pleuropericardiat cysts in three cases (14%), esophageal duplication in two cases (10%), and cystic hygroma in one case (5%). Two postoperative complications were observed: one esophageal wound and a case of recurrent pneumothorax after chest tube removal. Patients were discharged after 2 to 11 days (median, 3 days). Follow-up was uneventful. CONCLUSIONS: Treatment of mediastinal cyst by thoracoscopy is feasible in most cases. Compressive cysts with lung distension and mediastinal shift remain a contraindication. If the cysts have a common wall with the bronchus or esophagus, or if they are subcarinal, the dissection may be difficult and dangerous, and thoracotomy may be preferable.     

Blocage par injection de modes sous- harmoniques d’un oscillateur utilisant une ligne à retard à ondes de surface

A nonlinear regeneration pulsed oscillator driven by a monochromatic source has been built. Subharmonics of the resonance carrier/modulation are measured with an accuracy of 10^-10 thanks to the use of a double beats measurement set-up. The multiscale analysis of frequency readings reveals a rich fine structure which is in agreement with the nonlinear topological approach of synchronized states.