A model for the hydrogen coma of a comet

A model for the hydrogen coma of a comet on the basis of the Monte Carlo method is presented. In this model isotropic ejections of H atoms produced by photodissociation of H₂O and OH, thermalization of the H atoms due to collisions with ambient H₂O molecules, and the solar radiation pressure have been taken into account. A production spectrum of H atoms from OH is evaluated by using the predissociation rates and the level populations of OH, confirming that the spectrum has a sharp peak around 8.0 km sec^?1 with the standard deviation of 0.1 km sec^?1. Including the above effects, velocity distribution functions of the H atoms at various positions in the coma for the first time, as well as their density and outflow velocity profiles, have been calculated. It is pointed out that the collisional thermalization process in the inner coma is an important factor at small heliocentric distances in determining the density profiles and the velocity distributions. It is shown that thermalization leads to an increase in the H density in the inner coma larger than those expected from other models such as the vectorial model, in which collision is not taken into account. Lyman α isophotes and its line profiles in the optically thin region are computed by using the velocity distribution function.     

Molecular dynamics simulations of the phase transition between low-temperature and high-temperature clinoenstatites

 Phase transition between low-temperature clinoenstatite (LT-CEn) and high-temperature clinoenstatite (HT-CEn) was studied by using molecular dynamics (MD) simulations, based on empirical potential parameters. Starting from LT-CEn, the MD calculations were carried out at atmospheric pressure and at elevated pressures (1–6 GPa). At elevated temperatures the transformation from the starting LT-CEn to HT-CEn occurred at any pressure. It was confirmed that the HT-CEn has the same space group C2/c as diopside but the M2 site is six-coordinated, unlike diopside. A significant difference in the MD-simulated cell volumes between LT-CEn and HT-CEn was also observed, showing a first-order transition. In addition, there were some temperature ranges where LT-CEN and HT-CEn would be coexistent and very small thermal hystereses between increasing and decreasing temperatures during the transition. These behaviors are consistent with the characteristic of a thermoelastic-martensitic transformation. The phase boundary between LT-CEn and HT-CEn was determined for the first time. Its positive dT/dP slope strongly shows that the high-pressure clinoenstatite is a significantly distinct phase from HT-CEn although the both phases have the same space group, C2/c. Received: 8 November 2000 / Accepted: 28 April 2001     

The superstructure of plagioclase feldspars

A modulation function representing the position and density of (Na, Ca) atoms in the superstructure of the e-plagioclase has been derived from the average structures of different plagioclase and a general modulation theory. Based on this function the superstructure of bytownite (An₇₃) has been studied with the single crystal X-ray method. The cell dimensions by Megaw's axes are a=7.946(3)A, b=67.09(2)A, c=12.236(4)A, α=39.03(1)°, β=45.63(1)° and γ=59.63(1)°. Z=18(Na, Ca) Al(Al, Si)Si₂O₈. The initial phase factor of the modulation function for bytownite has been obtained from the intensity data of the satellite reflections. This modulation function indicates a coherent small-scale alternation of the Na-rich and Ca-rich bands in the superstructure. This superstructure has been refined by applying the albite and anorthite structures to the Na-rich and Ca-rich bands, respectively. The change of the superstructure of the e-plagioclase due to the compositional change has been described based on the movements of the satellites in reciprocal space. The direction of the coherent small-scale intergrowth of the anorthite-like and albite-like bands is perpendicular to the t vector. The thickness of the intergrowth is 1/|t|. Both direction and thickness change regularly from An₇₅ to An₂₅.     

Exsolved garnet-bearing pyroxene megacrysts from some South African kimberlites

Clinopyroxene and orthopyroxene megacrysts containing garnet lamellae up to 1.2 mm thick as an exsolved phase are found rarely in kimberlites from Frank Smith and Bellsbank. Chemically the clinopyroxenes are characteristically subcalcic, being within the range of 100 Ca/Ca + Mg + Fe = 27 to 36, and the orthopyroxenes are characterized by high Al₂O₃ and Cr₂O₃. Immediately after crystallization during very slow cooling, clinopyroxene and orthopyroxene exsolve wide-spaced orthopyroxene and clinopyroxene phases parallel to (100) of the host phases, respectively, then both host and exsolved phases exsolve garnet lamellae. Topotactic relations between pyroxenes and garnet are determined by X-ray for the first time. Partitioning of major and minor elements among the coexisting clinopyroxene, orthopyroxene and garnet in pyroxene megacrysts is the same as that of the granular-type garnet peridotite xenoliths in Lesotho and South African kimberlies. Mineralogy and chemistry indicate that subcalcic clinopyroxene and orthopyroxene megacrysts contain respectively about 10 and 3 mole % of the garnet molecule in solid solution.     

Electron microscopy of clinoenstatite from a boninite and a chondrite

Clinoenstatite crystals from a boninite and the Yamato-74191 chondrite have been studied with an analytical electron microscope. (100) twins and cracks perpendicular and parallel to the c axis are characteristic of their submicroscopic textures. The frequency in appearance along the c axis and widths of the cracks have been explained by the dimensional change of the c axis in the direct transformation of protoenstatite to clinoenstatite and by the cooling rate around the transformation temperature. The cracks in the crystals from the boninite are filled with fibrous crystals of talc, while those from the chondrite are open or filled with glass in which fine crystals of plagioclase are common.     

Hydraulic and numerical study on the generation of a subaqueous landslide-induced tsunami along the coast

By carrying out the hydraulic experiments in a one-dimensional open channel and two-dimensional basin, we clarified the process of how a landslide on a uniform slope causes the generation of a tsunami. The effect of the interactive force that occurs between the debris flow layer and the tsunami is significant in the generation of a tsunami. The continuous flow of the debris into the water makes the wave period of the tsunami short. The present experiments apply numerical simulation using the two-layer model with shear stress models on the bottom and interface, and the results are compared. The simulated debris flow shows good agreement with the measured results and ensures the rushing process into the water. We propose that the model use a Manning coefficient of 0.01 for the smooth slope and 0.015 for the rough slope, and a horizontal viscosity of 0.01 m²/s for the landslide; an interactive force of 0.2 for each layer is recommended. The dispersion effect should be included in the numerical model for the propagation from the shore.     

Distributions of tangential discontinuity in the corotating solar wind structure

Distributions of the tangential discontinuity (TD) in the solar wind sector structure are investigated on the basis of the magnetic field data and the ion plasma parameters from the Explorer 33 satellite from 23 January to 23 March 1968. The TD is separated from the observed field fluctuations by calculating the direction of the plasma flow and also the direction of the minimum field fluctuation with respect to the ambient magnetic field direction.It is found that the TD is formed by the thin layered field-aligned currents (the current sheets), and that the TD is predominantly built up in the leading edge of the solar wind where the compression of the plasma and the magnetic field takes place.It is suggested that the current sheets might be locally generated in the leading edge in the turbulent conditions arising from collisions between the fast- and the slow-stream of the solar sector structure.     

Observations of some oxygen-containing and sulfur-containing organic molecules in cold dark clouds

Observations of nine oxygen- and sulfur-containing organic molecules have been made toward the cold dark clouds TMC-1 and L134N. We have confirmed the presence of para-ketene (H2C2O) in TMC-1, have for the first time observed ortho-ketene, and find a total ketene column density approximately 1 x 10(13) cm-2. Thioformaldehyde (H2CS) is easily detectable in both TMC-1 and L134N, with a column density about 5 times larger in the former source (approximately 3 x 10(13) cm-2). The fractional abundance of ketene is comparable to the predictions of ion-molecule chemistry, while that of thioformaldehyde in TMC-1 is one to two orders of magnitude greater than that expected from such models at steady state. Interstellar sulfur chemistry thus continues to be poorly understood. We set upper limits for the column densities of formic acid (HCOOH), vinyl alcohol (CH2CHOH), methyl formate (HCO2CH3), formamide (NH2CHO), methyl mercaptan (CH3SH), isothiocyanic acid (HNCS), and thioketene (H2C2S) in both sources.     

Does heavy oil pollution induce bacterial diseases in Japanese flounder Paralichthys olivaceus?

As basic research for the effect of heavy oil on the fish immune system, in this study, the number of leukocyte was counted in Japanese flounder Paralichthys olivaceus, after exposure to heavy oil at a concentration of 30 g/8L for 3 days. To compare the numbers of bacteria in the skin mucus between oil-exposed and control fish, viable bacteria were enumerated by counting colony forming unit (CFU). Compared with 5.79+/-1.88 x 10(7)leukocytes/mL in the controls, the exposed fish demonstrated higher counts, averaging 1.45+/-0.45 x 10(8)cells/mL. The bacterial numbers of control fish were 4.27+/-3.68 x 10(4)CFU/g, whereas they were 4.58+/-1.63 x 10(5)CFU/g in the exposed fish. The results suggest that immune suppression of the fish occurred due to heavy oil stressor, and bacteria could invade in the mucus, resulting in the increasing leukocyte number to prevent infectious disease.