城市景观湖水文地质条件模拟浅析

现代城市中景观湖建设日益增多,尤其北方各大城市已建或在建橡胶坝工程较多,由此引起的湖区水文地质条件危害问题也日益突出。工程应用中多采用水位外推延伸法来对其危害进行估算。根据蓄水后沿岸水文地质条件,采用数学建模方法进行预测评价,通过对湖区相对隔水层的确定、水文地质条件模型的建立等步骤,最后得出湖区浸没危害的预测评价结果。     

Remediation of NAPL source zones: lessons learned from field studies at Hill and Dover AFB

Innovative remediation studies were conducted between 1994 and 2004 at sites contaminated by nonaqueous phase liquids (NAPLs) at Hill and Dover AFB, and included technologies that mobilize, solubilize, and volatilize NAPL: air sparging (AS), surfactant flushing, cosolvent flooding, and flushing with a complexing-sugar solution. The experiments proved that aggressive remedial efforts tailored to the contaminant can remove more than 90% of the NAPL-phase contaminant mass. Site-characterization methods were tested as part of these field efforts, including partitioning tracer tests, biotracer tests, and mass-flux measurements. A significant reduction in the groundwater contaminant mass flux was achieved despite incomplete removal of the source. The effectiveness of soil, groundwater, and tracer based characterization methods may be site and technology specific. Employing multiple methods can improve characterization. The studies elucidated the importance of small-scale heterogeneities on remediation effectiveness, and fomented research on enhanced-delivery methods. Most contaminant removal occurs in hydraulically accessible zones, and complete removal is limited by contaminant mass stored in inaccessible zones. These studies illustrated the importance of understanding the fluid dynamics and interfacial behavior of injected fluids on remediation design and implementation. The importance of understanding the dynamics of NAPL-mixture dissolution and removal was highlighted. The results from these studies helped researchers better understand what processes and scales are most important to include in mathematical models used for design and data analysis. Finally, the work at these sites emphasized the importance and feasibility of recycling and reusing chemical agents, and enabled the implementation and success of follow-on full-scale efforts.     

Using MODFLOW 2000 to model ET and recharge for shallow ground water problems

In environments with shallow ground water elevation, small changes in the water table can cause significant variations in recharge and evapotranspiration fluxes. Particularly, where ground water is close to the soil surface, both recharge and evapotranspiration are regulated by a thin unsaturated zone and, for accuracy, must be represented using nonconstant and often nonlinear relationships. The most commonly used ground water flow model today, MODFLOW, was originally designed with a modular structure with independent packages representing recharge and evaporation processes. Systems with shallow ground water, however, may be better represented using either a recharge function that varies with ground water depth or a continuous recharge and evapotranspiration function that is dependent on depth to water table. In situations where the boundaries between recharging and nonrecharging cells change with time, such as near a seepage zone, a continuous ground water flux relationship allows recharge rates to change with depth rather than having to calculate them at each stress period. This research article describes the modification of the MODFLOW 2000 recharge and segmented evapotranspiration packages into a continuous recharge-discharge function that allows ground water flux to be represented as a continuous process, dependent on head. The modifications were then used to model long-term recharge and evapotranspiration processes on a saline, semiarid floodplain in order to understand spatial patterns of salinization, and an overview of this process is given.     

Critical tissue copper residues for marine bivalve (Mytilus galloprovincialis) and echinoderm (Strongylocentrotus purpuratus) embryonic development: conceptual, regulatory and environmental implications

Critical tissue copper (Cu) residues associated with adverse effects on embryo-larval development were determined for the Mediterranean mussel (Mytilus galloprovincialis) and purple sea urchin (Strongylocentrotus purpuratus) following laboratory exposure to Cu-spiked seawater collected from San Diego Bay, California, USA. Whole body no-observed-effect-residues (NOER) were similar, with means of 21 and 23mugg(-1)dw, for M. galloprovincialis and S. purpuratus, respectively. Mean whole body median effect residues (ER50) were 49 and 142mugg(-1)dw for M. galloprovincialis and S. purpuratus, respectively. The difference in ER50s between species was reduced to a factor of <2 when expressed as soft tissue residues. Coefficients of variation among whole body-ER50s were 3-fold lower than median waterborne effect concentrations (EC50) for both species exposed to samples varying in water quality characteristics. This suggests that tissue concentrations were a better predictor of toxicity than water concentrations. The CBRs described herein do not differentiate between the internal Cu concentrations that are metabolically available and those that are accumulated and then detoxified. They do appear, however, to be well enough related to the level of accumulation at the site of action of toxicity that they serve as useful surrogates for the copper concentration that affects embryonic development of the species tested. Results presented have potentially important implications for a variety of monitoring and assessment strategies. These include regulatory approaches for deriving saltwater ambient water quality criteria for Cu, contributions towards the development of a saltwater biotic ligand model, the conceptual approach of using CBRs, and ecological risk assessment.     

Simulation/optimization modeling for robust pumping strategy design

A new simulation/optimization modeling approach is presented for addressing uncertain knowledge of aquifer parameters. The Robustness Enhancing Optimizer (REO) couples genetic algorithm and tabu search as optimizers and incorporates aquifer parameter sensitivity analysis to guide multiple-realization optimization. The REO maximizes strategy robustness for a pumping strategy that is optimal for a primary objective function (OF), such as cost. The more robust a strategy, the more likely it is to achieve management goals in the field, even if the physical system differs from the model. The REO is applied to trinitrotoluene and Royal Demolition Explosive plumes at Umatilla Chemical Depot in Oregon to develop robust least cost strategies. The REO efficiently develops robust pumping strategies while maintaining the optimal value of the primary OF-differing from the common situation in which a primary OF value degrades as strategy reliability increases. The REO is especially valuable where data to develop realistic probability density functions (PDFs) or statistically derived realizations are unavailable. Because they require much less field data, REO-developed strategies might not achieve as high a mathematical reliability as strategies developed using many realizations based upon real aquifer parameter PDFs. REO-developed strategies might or might not yield a better OF value in the field.