中国无机盐工业发展现状及展望

建国70 a以来中国无机盐工业发展迅猛,取得了巨大成就,中国已成为世界上最大的无机盐生产、出口和消费国。分析了中国无机盐工业生产现状和进出口情况,指出行业存在大宗产品产能过剩、产品精细化率偏低、产业集中度和资源配置率偏低、矿产资源保障能力不足、节能减排任务重、自主创新能力弱等问题,并提出未来发展建议及发展方向。新能源用无机材料、无机粉体功能材料、5G通迅用无机材料、电子化学品和电镀化学品等专用化学品将是未来无机盐工业发展的热点。随着产业链现代化水平的不断提升,将会逐渐实现行业规模化、绿色发展与安全生产。     

Leader-following consensus of fractional-order multi-agent systems via adaptive control

This article focuses on the consensus problem of leader-following fractional-order multi-agent systems (MASs) with general linear and Lipschitz nonlinear dynamics. First, the distributed adaptive protocols for linear and nonlinear fractional-order MASs are constructed, respectively. We allow the control coupling gains to be time varying for each agent. Moreover, the adaptive modification schemes for the control gain are designed, which renders smaller control gains and thus requires smaller amplitude on the control input without sacrificing consensus convergence. Second, based on fractional-order Lyapunov stability theorem and Barbalat's lemma, two novel sufficient conditions in terms of linear matrix inequalities are provided to ensure that the leader-following consensus can be obtained in the case for any undirected connected communication graph. Furthermore, we show that the proposed algorithm also works for consensus of agents with intrinsic Lipschitz nonlinear dynamics. As a result, the proposed framework requires no global information and thus can be implemented in a fully distributed manner. Finally, the numerical simulations are given to demonstrate the effectiveness of obtained the theoretical results.     

基于FCM燃料的商业压水堆中子学分析

全陶瓷微封装(Fully Ceramic Microencapsulated,FCM)燃料是一种将三结构同向性型(Tri-structural isotropic,TRISO)燃料颗粒弥散于SiC基质的先进燃料,具有良好的包容裂变产物的能力,能有效地改善核燃料在严重事故下保持结构完整性的能力,有利于降低核电站发生大量放射性物质泄漏的风险,是耐事故燃料(Accident Tolerant Fuel,ATF)的主要研究方向之一。与传统UO_2陶瓷芯块燃料相比,FCM燃料的U装量较少,且燃料基体采用SiC,慢化能力较好,可能导致FCM燃料应用于商业压水堆时寿期初慢化剂温度系数为正,不能满足堆芯的固有安全性。本文以标准AFA3G 17×17栅格形式的UO_2-Zr合金燃料组件为参照对象,采用中核集团自主研发的NESTOR软件,分析了17×17和13×13两种栅格形式的FCM燃料(UN核芯)组件的中子学特性,评价了由13×13栅格形式的FCM燃料(UN核芯)组成反应堆堆芯的总体物理特性。研究表明:含钆可燃毒物的13×13栅格形式的FCM燃料(UN核芯)组件可满足欠慢化要求,13×13栅格形式的FCM燃料(UN核芯)用于大型商业压水堆堆芯的慢化剂温度系数可以为负,首循环堆芯可达到与参照堆芯接近的燃耗深度与循环长度,能初步满足商业压水堆堆芯的固有安全性和经济性的要求。     

Precise Extraction of Charge Carrier Mobility for Organic Transistors

Unreliable mobility values, and particularly greatly overestimated values and severely distorted temperature dependences, have recently hampered the development of the organic transistor field. Given that organic field‐effect transistors (OFETs) have been routinely used to evaluate mobility, precise parameter extraction using the electrical properties of OFETs is thus of primary importance. This review examines the origins of the various mobilities that must be determined for OFET applications, the relevant extraction methods, and the data selection limitations, which help in avoiding conceptual errors during mobility extraction. For increased precision, the review also discusses device fabrication considerations, calibration of both the specific gate‐dielectric capacitance and the threshold voltage, the contact effects, and the bias and temperature dependences, which must actually be handled with great care but have mostly been overlooked to date. This review serves as a systematic overview of the OFET mobility extraction process to ensure high precision and will also aid in improving future research.     

Flotation Behavior,Collector Adsorption Mechanism of Quartz and Feldspar-Quartz Systems Using PEA as a Novel Green Collector

Silicon - A novel green cationic surfactant Poly (propylene glycol) bis (2-aminopropyl ether) (PEA) with multiple amine groups was utilized as a collector for flotation separation of quartz from...     

新工科背景下校企合作培养化学工程高素质复合型人才的思考

新工科建设对化学工程科技人才的学科知识、专业能力、综合素质提出了更高要求,而校企合作是培养化学工程高素质复合型人才的必由之路。文章从依托生产平台、校企导师协作指导、合作攻关项目、跨专业交流、重视工程管理教育、优化考核制度六个方面探讨了校企合作培养研究生的策略,并分析了研究生自身能力的提升机制。     

非连续采空区矿柱力学分析的数值模拟

为探讨非连续采空区矿柱力学原理，通过FLAC3D数值模拟技术，对下向水平分层进路式胶结充填采矿法开采形成的非连续采空区中矿柱的受力状态进行了分析。研究表明，非连续采空区中矿柱所受的力主要为覆岩的自重应力，水平应力对其影响不大；随着埋深的增加矿柱承受的垂直方向的力近似呈直线增加；随着非连续采空区跨度的增加（进路数量增加），非连续采空区受垂直方向的应力逐渐由围岩两侧向矿柱中间过渡。