Polyethylene paper insulation impregnated with liquid nitrogen

Polyethylene paper tape wrapped insulation impregnated with liquid nitrogen for cryogenic cables was studied using model cable specimens, 66 kV cryocable samples, and 275 kV cryocable samples. This insulation system performs well in that (1) voltage deterioration is small, (2) thickness dependence is small, and (3) dissipation factor is small. This insulation system is one of the most promising systems for a large capacity transmission cryogenic cable.     

A study of breakdown strength of liquid nitrogen cooled power cables

A 66 KV liquid nitrogen cooled cryogenic cable was manufactured and tested using ac and impulse voltages.Liquid nitrogen cooled cryogenic cables will be in practical use over the 275–500 kV range. Study of the 66 kV class cable is the first step towards the development. The insulation system of this cable is polyethylene paper tape wrapped insulation impregnated with liquid nitrogen and its insulation thickness is about 7.75 mm. The influence of bending, conductor surface effect, and thickness dependence on the breakdown strength are discussed.     

Effects of Surface Finish of Nonwoven Fabric Bag Filters on Filter Efficiency

The effects of the surface finish of the bag filter for industrial use on the spatial distributions of the fiber mass, air permeability, and thickness were examined using a nonwoven fabric filter made of polytetrafluoroethylene (PTFE) with no surface finish and two nonwoven fabric filters made of PTFE with different surface finishes, i.e., resin finish and membrane finish. The surface finish had no impact on the non-uniformity in air permeability distribution. However, the air permeability of the filters was reduced with the use of a surface finish. In addition, the specific filtration resistance of the filter media increased by approximately 1.2 times in the case of the resin finish and 4.2 times for the membrane finish. Hence, the influence of the membrane finish on the filter efficiency is extremely strong.     

Application of Nitrate,Ammonium, or Urea Changes the Concentrations of Ureides,Urea, Amino Acids and Other Metabolites in Xylem Sap and in the Organs of Soybean Plants (Glycine max (L.) Merr.)

Soybean (Glycine max (L.) Merr.) plants form root nodules and fix atmospheric dinitrogen, while also utilizing the combined nitrogen absorbed from roots. In this study, nodulated soybean plants were supplied with 5 mM N nitrate, ammonium, or urea for 3 days, and the changes in metabolite concentrations in the xylem sap and each organ were analyzed. The ureide concentration in the xylem sap was the highest in the control plants that were supplied with an N-free nutrient solution, but nitrate and asparagine were the principal compounds in the xylem sap with nitrate treatment. The metabolite concentrations in both the xylem sap and each organ were similar between the ammonium and urea treatments. Considerable amounts of urea were present in the xylem sap and all the organs among all the treatments. Positive correlations were observed between the ureides and urea concentrations in the xylem sap as well as in the roots and leaves, although no correlations were observed between the urea and arginine concentrations, suggesting that urea may have originated from ureide degradation in soybean plants, possibly in the roots. This is the first finding of the possibility of ureide degradation to urea in the underground organs of soybean plants.     

Estimation of inorganic food additive (nitrite,nitrate and sulfur dioxide), antioxidant (BHA and BHT), processing agent (propylene glycol) and sweetener (sodium saccharin) concentrations in foods and their daily intake based on official inspection results in Japan in fiscal year 1998

The mean concentration and daily intake of inorganic food additives (nitrite, nitrate, and sulfur dioxide), antioxidants (BHA and BHT), a processing agent (propylene glycol), and a sweetener (sodium saccharin) were estimated based on the results of an analysis of 34,489 food samples obtained in official inspections by 106 local governments in Japan in fiscal year 1998. The ratios of mean concentrations of these seven food additives to each allowable limit were 20.0%, 53.9%, 15.5%, 6.2%, 0.4%, 18.5%, and 5.7%, respectively. The daily intakes of these food additives estimated from their concentrations in foods and the daily consumption of foods were 0.205, 0.532, 4.31, 0.119, 0.109, 77.5, and 7.27 mg per person, respectively. These amounts were 6.8%, 0.3%, 12.3%, 0.5%, 0.7%, 6.2%, and 2.6% of the acceptable daily intake (ADI), respectively, when body weight was assumed to be 50 kg. No remarkable differences in the daily intakes of these seven food additives or the ratios to the ADI were observed compared with the results based on the official inspections in fiscal years 1994 and 1996.     

A Stimuli‐Responsive,Photoluminescent, Anthracene‐Based Liquid Crystal: Emission Color Determined by Thermal and Mechanical Processes

Here, a photoluminescent liquid crystal that exhibits a change of emission color on the metastable–stable phase transition induced by external stimuli is prepared. A 2,6‐diethynylanthracene derivative with amide groups and dendritic side chains exhibits a columnar phase on slow cooling from the isotropic phase and shows blue emission in this columnar phase. In contrast, a cubic phase is obtained by rapid cooling from the isotropic phase. In the cubic phase, the 2,6‐diethynylanthracene cores form excimers, resulting in yellow emission. While the columnar phase is a stable liquid‐crystalline (LC) phase, the cubic phase is a metastable LC phase. It is found that a change of the photoluminescent color from yellow to blue is observed on the cubic‐columnar phase transition induced by heating or mechanical shearing for this 2,6‐diethynylanthracene derivative in the cubic phase. This change of photoluminescent color is ascribed to the inhibition of excimer formation on the metastable–stable LC phase transition.     

A high-speed-retry banyan switch architecture for giga-bit-rate BISDN networks

This paper proposes a high-speed ATM switch architecture for handling cell rates of several Gb/s in a broadband communication switching system or cross-connect system. The proposed switch architecture, named the high-speed-retry banyan switch, employs a bufferless banyan network between input and output buffers; a cell is repeatedly transmitted from an input buffer until it can be successfully transmitted to the desired output buffer. A simple cell-retransmission algorithm, is employed as is a ring-arbitration algorithm for cell conflict. They are suitable for FIFO type buffers and bufferless highspeed devices. Good traffic characteristics which are independent of switch size are achieved for an internal speed ratio of only four times the input line speed. A prototype system with the internal speed of 1·2 Gb/s is constructed in order to confirm the basic operation of the high-speed-retry banyan switch. The prototype system, even in its present state, could be used to realize a giga-bit-rate BISDN switching system.     

Effect of Al(OH)3 Addition on β-LiAlO2 Crystal Growth

Crystal growth of rod-shaped β-LiAlO₂ was previously reported by us, and the rod-shaped β-LiAlO₂ crystals were 1.5 μ in diameter and 10 to 15 μm long. In the present study needle-shaped β-LiAlO₂ crystals which were thinner and had larger aspect ratios (length/diameter) than the rodshaped β-LiAlO₂ crystals were grown by using LiOH–Al₂O₃–Al(OH)₃–NaOH as the raw material. These crystals were 0.7 to 1 μm in diameter, 9 to 13 μm long, and had aspect ratios of about 10 to 13.