Chemical Vapor Deposition Growth of High Crystallinity Sb2Se3 Nanowire with Strong Anisotropy for Near‐Infrared Photodetectors

Low‐dimensional semiconductors have attracted considerable attention due to their unique structures and remarkable properties, which makes them promising materials for a wide range of applications related to electronics and optoelectronics. Herein, the preparation of 1D Sb₂Se₃ nanowires (NWs) with high crystal quality via chemical vapor deposition growth is reported. The obtained Sb₂Se₃ NWs have triangular prism morphology with aspect ratio range from 2 to 200, and three primary lattice orientations can be achieved on the sixfold symmetry mica substrate. Angle‐resolved polarized Raman spectroscopy measurement reveals strong anisotropic properties of the Sb₂Se₃ NWs, which is also developed to identify its crystal orientation. Furthermore, photodetectors based on Sb₂Se₃ NW exhibit a wide spectral photoresponse range from visible to NIR (400–900 nm). Owing to the high crystallinity of Sb₂Se₃ NW, the photodetector acquires a photocurrent on/off ratio of about 405, a responsivity of 5100 mA W^?1, and fast rise and fall times of about 32 and 5 ms, respectively. Additionally, owing to the anisotropic structure of Sb₂Se₃ NW, the device exhibits polarization‐dependent photoresponse. The high crystallinity and superior anisotropy of Sb₂Se₃ NW, combined with controllable preparation endows it with great potential for constructing multifunctional optoelectronic devices.     

2D Free‐Standing Nitrogen‐Doped Ni‐Ni3S2@Carbon Nanoplates Derived from Metal–Organic Frameworks for Enhanced Oxygen Evolution Reaction

2D metal–organic frameworks (2D MOFs) are promising templates for the fabrication of carbon supported 2D metal/metal sulfide nanocomposites. Herein, controllable synthesis of a newly developed 2D Ni‐based MOF nanoplates in well‐defined rectangle morphology is first realized via a pyridine‐assisted bottom‐up solvothermal treatment of NiSO₄ and 4,4′‐bipyridine. The thickness of the MOF nanoplates can be controlled to below 20 nm, while the lateral size can be tuned in a wide range with different amounts of pyridine. Subsequent pyrolysis treatment converts the MOF nanoplates into 2D free‐standing nitrogen‐doped Ni‐Ni₃S₂@carbon nanoplates. The obtained Ni‐Ni₃S₂ nanoparticles encapsulated in the N‐doped carbon matrix exhibits high electrocatalytic activity in oxygen evolution reaction. A low overpotential of 284.7 mV at a current density of 10 mA cm^?2 is achieved in alkaline solution, which is among the best reported performance of substrate‐free nickel sulfides based nanomaterials.     

2D Metal Chalcogenides for IR Photodetection

Infrared (IR) photodetectors are finding diverse applications in imaging, information communication, military, etc. 2D metal chalcogenides (2DMCs) have attracted increasing interest in view of their unique structures and extraordinary physical properties. They have demonstrated outstanding IR detection performance including high responsivity and detectivity, high on/off ratio, fast response rate, stable room temperature operability, and good mechanical flexibility, which has opened up a new prospect in next‐generation IR photodetectors. This Review presents a comprehensive summary of recent progress in advanced IR photodetectors based on 2DMCs. The rationale of the photodetectors containing photocurrent generation mechanisms and performance parameters are briefly introduced. The device performances of 2DMCs‐based IR photodetectors are also systematically summarized, and some representative achievements are highlighted as well. Finally, conclusions and outlooks are delivered as a guideline for this thriving field.     

Linear Dichroism and Nondestructive Crystalline Identification of Anisotropic Semimetal Few‐Layer MoTe2

Semimetal 1T′ MoTe₂ crystals have attracted tremendous attention owing to their anisotropic optical properties, Weyl semimetal, phase transition, and so on. However, the complex refractive indices (n‐ik) of the anisotropic semimetal 1T′ MoTe₂ still are not revealed yet, which is important to applications such as polarized wide spectrum detectors, polarized surface plasmonics, and nonlinear optics. Here, the linear dichroism of as‐grown trilayer 1T′ MoTe₂ single crystals is investigated. Trilayer 1T′ MoTe₂ shows obvious anisotropic optical absorption due to the intraband transition of d_z² orbits for Mo atoms and p_x orbits for Te atoms. The anisotropic complex refractive indices of few‐layer 1T′ MoTe₂ are experimentally obtained for the first time by using the Pinier equation analysis. Based on the linear dichroism of 1T′ MoTe₂, angle‐resolved polarized optical microscopy is developed to visualize the grain boundary and identify the crystal orientation of 1T′ MoTe₂ crystals, which is also an excellent tool toward the investigation of the optical absorption properties in the visible range for anisotropic 2D transition metal chalcogenides. This work provides a universal and nondestructive method to identify the crystal orientation of anisotropic 2D materials, which opens up an opportunity to investigate the optical application of anisotropic semimetal 2D materials.     

Chromogenic Photonic Crystal Sensors Enabled by Multistimuli‐Responsive Shape Memory Polymers

Here novel chromogenic photonic crystal sensors based on smart shape memory polymers (SMPs) comprising polyester/polyether‐based urethane acrylates blended with tripropylene glycol diacrylate are reported, which exhibit nontraditional all‐room‐temperature shape memory (SM) effects. Stepwise recovery of the collapsed macropores with 350 nm diameter created by a “cold” programming process leads to easily perceived color changes that can be correlated with the concentrations of swelling analytes in complex, multicomponent nonswelling mixtures. High sensitivity (as low as 10 ppm) and unprecedented measurement range (from 10 ppm to 30 vol%) for analyzing ethanol in octane and gasoline have been demonstrated by leveraging colorimetric sensing in both liquid and gas phases. Proof‐of‐concept tests for specifically detecting ethanol in consumer medical and healthcare products have also been demonstrated. These sensors are inexpensive, reusable, durable, and readily deployable with mobile platforms for quantitative analysis. Additionally, theoretical modeling of solvent diffusion in macroporous SMPs provides fundamental insights into the mechanisms of nanoscopic SM recovery, which is a topic that has received little examination. These novel sensors are of great technological importance in a wide spectrum of applications ranging from environmental monitoring and workplace hazard identification to threat detection and process/product control in chemical, petroleum, and pharmaceutical industries.     

Tunable Color Temperatures and Efficient White Emission from Cs2Ag1−xNaxIn1−yBiyCl6 Double Perovskite Nanocrystals

Recently, Bi‐doped Cs₂Ag_0.6Na_0.4InCl₆ lead‐free double perovskites demonstrating efficient warm‐white emission have been reported. To enable the solution processing and enrich the application fields of this promising material, here a colloidal synthesis of Cs₂Ag_1?xNa_xIn_1?yBi_yCl₆ nanocrystals is further developed. Different from its bulk states, the emission color temperatures of the nanocrystal can be tuned from 9759.7 to 4429.2 K by Na⁺ and Bi³⁺ incorporation. Furthermore, the newly developed nanocrystals can break the wavefunction symmetry of the self‐trapped excitons by partial replacement of Ag⁺ ions with Na⁺ ions and consequently allow radiative recombination. Assisted with Bi³⁺ ions doping and ligand passivation, the photoluminescence quantum yield of the Cs₂Ag_0.17Na_0.83In_0.88Bi_0.12Cl₆ nanocrystals is further promoted to 64%, which is the highest value for lead‐free perovskite nanocrystals at present. The new colloidal nanocrystals with tunable color temperature and efficient photoluminescence are expected to greatly advance the research progress of lead‐free perovskites in single‐emitter‐based white emitting materials and devices.     

稻糠基磁性高吸油材料的仿生制备及性能研究

利用多巴胺的自聚合作用使Fe3O4纳米粒子固载于稻糠表面,进而采用十八胺进行样品表面疏水改性,制备得到稻糠基新型磁性疏水吸油材料.利用扫描电子显微镜、傅里叶变换红外光谱、X射线衍射、磁滞回线和接触角测定等技术对制备的样品进行了表征.实验结果表明,多巴胺改性成功实现了Fe3O4纳米粒子在稻糠表面的固载,所制得的稻糠基吸油材料具有较好的磁性,其磁饱和强度达39.6 emu/g,样品的接触角达135°,具有高疏水性.在对三氯甲烷等七种油性物质的吸油实验中发现,稻糠基新型磁性疏水吸油材料的最高吸油量可达自身质量的6.83倍,且样品的适用范围广、重复利用率高.     

Overlapping thematic structures extraction with mixed-membership stochastic blockmodel

It is increasing important to identify automatically thematic structures from massive scientific literature. The interdisciplinarity enables thematic structures without natural boundaries. In this work, the identification of thematic structures is regarded as an overlapping community detection problem from the large-scale citation-link network. A mixed-membership stochastic blockmodel, armed with stochastic variational inference algorithm, is utilized to detect the overlapping thematic structures. In the meanwhile, in order to enhance readability, each theme is labeled with soft mutual information based method by several topical terms. Extensive experimental results on the astro dataset indicate that mixed-membership stochastic blockmodel primarily uses the local information and allows for the pervasive overlaps, but it favors similar sized themes, which disqualifies this approach from being used to extract the thematic structures from scientific literature. In addition, the thematic structures from the bibliographic coupling network is similar to those from the co-citation network.     

Effects of sintering temperature on the microstructure and thermoelectric properties of mesostructured Co<Subscript>4</Subscript>Sb<Subscript>11.5</Subscript>Te<Subscript>0.5</Subscript> skutterudites dispersed nano-TiN

The mesostructured skutterudites Co₄Sb_11.5Te_0.5?+?nano-TiN composites are prepared through ball milling and spark plasma sintering (SPS). The influence of the various SPS temperatures within the range of 813–933 K on the microstructure and thermoelectric properties are focus in this work. The average grain sizes of the skutterudites increase from ~?110 to ~?500 nm with the increasing SPS temperature, while the densities of composites decrease from 7.02 to 6.26 g cm^?3. Additionally, the phase of CoTe₂ is detected in the samples sintered at 903–933 K. With the SPS temperature increasing from 813 to 903 K, the electrical conductivity and thermal conductivity increase simultaneously, and then decrease when SPS temperature rises to 933 K. The absolute value of Seebeck coefficient shows no clear changes when SPS temperature is not higher than 873 K but then slightly decreases with the increasing of SPS temperature. At last, the optimum SPS temperature is determined as 873 K, the ZT value of 1.07 at 800 K for the sample SPSed at 873 K is obtained, which is 11.5% higher than that of the sample SPSed at 903 K.     

Silk fibroin-based woven endovascular prosthesis with heparin surface modification

A novel seamless silk fibroin-based endovascular prosthesis (SFEPs) with bifurcated woven structure and anticoagulant function for the improvement of patency is described. The SFEPs were prepared from silk fibroin (SF) and polyester filaments using an installed weaving machine. The production processing parameters were optimized using orthogonal design methods. The inner surface of SFEPs was modified with polyethylenimine (PEI) and EDC/NHS-activated low-molecular-weight heparin (LMWH) to enhance anticoagulant function. The surface morphology and mechanical properties of the SFEPs were evaluated according to standard protocols. The thickness of modified SFEPs was lower than 0.085?±?0.004?mm and water permeability was lower than 5.19?±?0.30?mL/(cm²?×?min). The results of mechanical properties showed that the diametral tensile strength and burst strength reached 61.6?±?1.8 and 23.7?±?2.2?MPa, respectively. Automatic coagulometer and energy-dispersive X-ray (EDX) confirmed LMWH immobilization on the surface of the SFEPs and the blood compatibility was improved with the heparin modification with PEI polymerization. In conclusion, the new prosthesis has potential applications in the blood vessel repairs where minimal thickness but superior mechanical strength and biocompatibility are important.