Measurement of thermal expansivity of low-expansion glasses by interferometric methods: Results of an interlaboratory comparison

An interlaboratory testing program on the measurement of the linear thermal expansion coefficient of low-expansion glasses has been carried out. Three different types of interferometric dilatometers, each located at three different organizations, and two kinds of low-expansion glass materials were selected for the experiments. As a result of the comparison, a reasonable agreement among the different measuring instruments was confirmed, and it was determined that the thermal expansion coefficient for low-expansion glasses can be measured with an accuracy of ±4×10^–8 K^–1 by using commercially available interferometric dilatometers.     

Phase diagram and Raman spectroscopy of EuCl2---NaCl binary mixtures

A phase diagram of the EuCl₂---NaCl system was determined by differential scanning calorimetry (DSC) and the activity coefficients of EuCl₂ and NaCl in this system were estimated under some assumptions. According to DSC measurement, it was found that there were two phase transitions at 1123.9 K and 1016.8 K. In order to specify the melting point of EuCl₂ we did Raman spectroscopy experiments. Thus, the melting point of EuCl₂ was evaluated to be 1016.8 K which was detected as the lower peak in the DSC curve. Raman spectroscopy of this system suggested that complex species were not formed clearly in the EuCl₂ poor system and the estimated activity coefficients of EuCl₂ also supported this suggestion.     

Three-Dimensional Measurement of Ice Crystals in Frozen Materials by Near-Infrared Imaging Spectroscopy

A novel technique was developed to recognize ice crystals in biological materials and to analyze their three-dimensional morphology using a Cryogenic Micro-Slicer Spectral Imaging System with a micro-slicer unit and a near-infrared spectral imaging unit. Consecutive cross-sections of a frozen sample were exposed by the multi-slicing operations with a minimum thickness of 1 µm, and their images were taken by the imaging unit. Spectroscopic analysis using a near-infrared spectrum meter showed an absorption peak at 1460 nm for pure water. Based on the observations of the absorption band of ice crystals in the wavelength range of 1450–1570 nm and its peak at 1495 nm, a commodity-type bandpass filter with a central wavelength of 1500 nm was adopted to identify ice crystals in near-infrared images. The absorption peak of water exhibited a tendency to move toward longer wavelengths with decreasing sample temperature from 25 °C to ?15 °C. The filtered images of ice crystals in frozen samples were darker than the other components at the peak wavelength of ice crystals. The three-dimensional reconstructed morphology of ice crystals revealed that they were formed along the direction of heat transfer while freezing. The proposed method provides a novel tool to investigate the effects of freezing conditions on the size, morphology and distribution of ice crystals.     

Adjunctive Application of Antimicrobial Photodynamic Therapy in Nonsurgical Periodontal Treatment: A Review of Literature

Periodontal disease is caused by dental plaque biofilms, and the removal of these biofilms from the root surface of teeth plays a central part in its treatment. The conventional treatment for periodontal disease fails to remove periodontal infection in a subset of cases, such as those with complicated root morphology. Adjunctive antimicrobial photodynamic therapy (aPDT) has been proposed as an additional treatment for this infectious disease. Many periodontal pathogenic bacteria are susceptible to low-power lasers in the presence of dyes, such as methylene blue, toluidine blue O, malachite green, and indocyanine green. aPDT uses these light-activated photosensitizer that is incorporated selectively by bacteria and absorbs a low-power laser/light with an appropriate wavelength to induce singlet oxygen and free radicals, which are toxic to bacteria. While this technique has been evaluated by many clinical studies, some systematic reviews and meta-analyses have reported controversial results about the benefits of aPDT for periodontal treatment. In the light of these previous reports, the aim of this review is to provide comprehensive information about aPDT and help extend knowledge of advanced laser therapy.     

Site‐Selective Iron(III) Chloride‐Catalyzed Arylation of 4‐Aryl‐4‐methoxy‐2,5‐cyclohexadienones for the Synthesis of Polyarylated Phenols

The iron(III) chloride‐catalyzed Friedel–Crafts arylation of 4‐aryl‐4‐methoxy‐2,5‐cyclohexadienones, which were easily prepared by the phenyliodine(III) diacetate (PIDA)‐mediated oxidation of 4‐arylphenols in methanol, proceeded site‐selectively to form meta‐terphenyl (2,4‐diarylphenol) derivatives in good yields. The subsequent PIDA‐mediated oxidation and iron(III) chloride‐catalyzed Friedel–Crafts arylation of the resulting products gave the corresponding 2,4,6‐triarylphenol derivatives. The present method provides useful highly substituted polyarylated compounds.

     

Predator Avoidance by Phytophagous Mites is Affected by the Presence of Herbivores in a Neighboring Patch

When predators invade a leaf patch inhabited by herbivores, the herbivores disperse to a neighboring predator-free leaf patch, thus escaping from the predators. However, the neighboring patch might already be used by con- or heterospecific herbivores. We used laboratory bioassays to examine whether perception of odor from con- or heterospecific competitors on a neighbored lima bean leaf patch influences dispersal behavior of the herbivorous mite Tetranychus urticae when attacked by predatory mites Phytoseiulus persimilis. The dispersal rates of T. urticae that perceived odors from leaf patches infested by conspecifics or cowpea aphids (Aphis craccivora) did not differ from the control (the dispersal rate of T. urticae that perceived odor from uninfested leaf patches). By contrast, the dispersal rate of T. urticae was reduced when they perceived odors from leaf patches that were currently or had previously been infested by larvae of the common cutworm (Spodoptera litura). Previous herbivory by S. litura larvae induced resistance in leaf patches to T. urticae as indicated by the reduced number of eggs laid by T. urticae. Our results are discussed with respect to the feeding behavior of the tested competitors of T. urticae and the impact of the plant and arthropod community on the dispersal behavior of these mites.     

Detailed Analysis of Temperature Characteristics of an InGaP/InGaAs/Ge Triple-Junction Solar Cell

Temperature characteristics of an InGaP/InGaAs/Ge triple-junction solar cell were analyzed in detail using an equivalent circuit calculation. The current–voltage (I–V) characteristics of single-junction solar cells (InGaP, InGaAs, Ge solar cells) were measured at various temperatures. Fitting of I–V curves between measured and calculated data was carried out, and the diode parameters and temperature exponents of the single-junction solar cells were extracted. The parameters for each single-junction solar cell were used in the equivalent circuit model for the triple-junction solar cell, and calculations of solar cell performance were carried out. Measured and calculated results of the I–V characteristics at various temperatures agreed well.     

Preparation and biological evaluation of hydroxyapatite-coated nickel-free high-nitrogen stainless steel

Calcium phosphate was formed on nickel-free high-nitrogen stainless steel (HNS) by chemical solution deposition. The calcium phosphate deposition was enhanced by glutamic acid covalently immobilized on the surface of HNS with trisuccinimidyl citrate as a linker. X-ray diffraction patterns and Fourier transform infrared spectra showed that the material deposited on glutamic acid-immobilized HNS within 24 h was low-crystallinity calcium-deficient carbonate-containing hydroxyapatite (HAp). The biological activity of the resulting HAp-coated HNS was investigated by using a human osteoblast-like MG-63 cell culture. The HAp-coated HNS stimulated the alkaline-phosphate activity of the MG-63 culture after 7 days. Therefore, HAp-coated HNS is suitable for orthopedic devices and soft tissue adhesion materials.     

Effects of CdS buffer layers on photoluminescence properties of Cu(In,Ga)Se2 solar cells

Photoluminescence (PL) have been studied on Cu(In,Ga)Se₂ (CIGS) thin films, CdS/CIGS and CIGS solar cells, to clarify the carrier recombination process. The chemical-bath deposition (CBD) of the CdS buffer layer on the CIGS thin film leads to (i) the enhancement of near-band-edge PL intensity by a factor of 2–3, (ii) change in energy of the defect-related PL and (iii) the slight change in the decay time. They are related not only to the minimization of the surface recombination but also to the modification of native defects at the Cu-poor surface of CIGS by the occupation of Cd atom at the Cu site. A donor–acceptor pair PL at low-temperature and temperature-dependent PL have been studied. They are discussed in terms of the impurity and defect levels created in the CIGS film during the CBD-CdS process.     

Three-dimensional simulating of concentrator photovoltaic modules using ray trace and equivalent circuit simulators

A 3-dimensional (3D) simulation for a concentrator photovoltaic (CPV) module using a triple-junction solar cell was developed. By connecting ray-trace simulation for an optics model and 3D equivalent circuit simulation for a triple-junction solar cell, the operating characteristics of a CPV module were calculated. By using the 3D simulation, we considered the influence of tracking error on the CPV module. It was found that maximum output power was not correlated with optical efficiency of the optics system and was strongly dependent on fill factor. We can use this total 3D simulation for the evaluation and optimization of CPV modules.