The structure of mineral fillers and their stiffening properties in filler-bitumen mastics

The subject of the study was limestone filler samples of various structures, which were obtained through planned laboratory processing. The aim of the paper was to improve knowledge on the subject of the structure of limestone fillers (grain-size distribution, specific surface area, void content, shape ‘sphericity’ and texture of grain surfaces ‘roundness’), as well as investigating the numerical quantity relationship between the structures of fillers and their stiffening properties. Analysis of the results showed considerable differences in the structure of the tested fillers regarding Rigden void (RV), specific surface area S _sp, average grain diameter and grain morphology. It also proved, for 95% confidence interval that there is a considerable influence of RV, S _sp, as well as the roundness of the grains of the fillers on their stiffening properties.     

Comparison of thermomechanical properties of statistical, gradient and block copolymers of isobornyl acrylate and n-butyl acrylate with various acrylate homopolymers

Well-defined statistical, gradient and block copolymers consisting of isobornyl acrylate (IBA) and n-butyl acrylate (nBA) were synthesized via atom transfer radical polymerization (ATRP). To investigate structure-property correlation, copolymers were prepared with systematically varied molecular weights and compositions. Thermomechanical properties of synthesized materials were analyzed via differential scanning calorimetry (DSC), dynamic mechanical analyses (DMA) and small-angle X-ray scattering (SAXS). Glass transition temperature (T_g) of the resulting statistical poly(isobornyl acrylate-co-n-butyl acrylate) (P(IBA-co-nBA)) copolymers was tuned by changing the monomer feed. This way, it was possible to generate materials which can mimic thermal behavior of several homopolymers, such as poly(t-butyl acrylate) (PtBA), poly(methyl acrylate) (PMA), poly(ethyl acrylate) (PEA) and poly(n-propyl acrylate) (PPA). Although statistical copolymers had the same thermal properties as their homopolymer equivalents, DMA measurements revealed that they are much softer materials. While statistical copolymers showed a single T_g, block copolymers showed two T_gs and DSC thermogram for the gradient copolymer indicated a single, but very broad, glass transition. The mechanical properties of block and gradient copolymers were compared to the statistical copolymers with the same IBA/nBA composition.     

PCR‐Based Differentiation and Homology of Brewing and Type Strains of the Genus Saccharomyces

Restriction fragment length polymorphism (RFLP) patterns of PCR‐amplified ribosomal RNA gene fragments (rDNA) and randomly amplified polymorphic DNA (RAPD) were applied for the analysis of 15 brewing and 6 related yeast strains of the genus Saccharomyces. One five‐base (ScrFI) and two four‐base cutting (HaeIII, MspI) restriction enzymes were used. The primers 21 and M13 core sequence were selected for RAPD analysis. PCR‐RFLP rDNA analysis with HaeIII, ScrFI and MspI differentiated the strains tested into four, five and four types of patterns, respectively and the analyses of the profiles showed 100% homology, between the yeast strains. One strain was an exception. Homological groups were observed for strains used in breweries globally, from a local production strain and from the isolates identified as S. cerevisiae. Using RAPD analysis, and according to discrete differences in the profiles, it was possible to divide twenty one strains into 15 and 20 groups with primer 21 and M13 respectively. RFLP‐PCR rDNA analysis was used to show similarities in closely related brewing strains, while RAPD analysis was used for differentiation of strains.     

Optimizing concentration and timing of a phage spray application to reduce Listeria monocytogenes on honeydew melon tissue

A phage cocktail was applied to honeydew melon pieces 1, 0.5, and 0 h before contamination with Listeria monocytogenes strain LCDC 81-861 and 0.5, 1, 2, and 4 h after contamination. The phage application was most effective when applied 1, 0.5, or 0 h before contamination with L. monocytogenes, reducing pathogen populations by up to 6.8 log units after 7 days of storage. This indicates that under commercial conditions, if contamination occurs at the time of cutting, phage would have to be applied as soon as possible after cutting the produce. However, all phage applications from 1 h before to 4 h after contamination and all phage concentrations ranging from 10(4) to 10(8) PFU/ml reduced bacterial populations on honeydew melon pieces. Higher phage concentrations were more effective in reducing pathogen populations. A phage concentration of approximately 10(8) PFU/ml was necessary to reduce the pathogen populations to nondetectable levels immediately after treatment, and pathogen growth was suppressed by phage concentrations of 10(6) through 10(8) throughout the storage period of 7 days at 10 degrees C. In an attempt to enhance the effectiveness of the phage cocktail on low pH fruit, such as apples, the phage was applied in combination with MnCl2. This combination, however, did not enhance the effectiveness of the phage on apple tissue. The results from this study indicate that the effectiveness of the phage application on honeydew melon pieces can be optimized by using a phage concentration of at least 10(8) PFU/ml applied up to 1 h after processing of the honeydew melons.     

The relationship between polypeptides and foaming during fermentation

The foam level during fermentations of hopped and unhopped wort and with fresh yeast and successive generations of yeast was examined. Simultaneously the total and hydrophobic polypeptide contents in worts, fermented worts and their concomitant foams were checked. It was shown that the total and hydrophobic polypeptide contents of the foam fraction and the foam level during fermentation were dependent on the generation number of yeast. The early generations of yeast (generations 1 and 2) promoted the formation of the largest amount of foam. It was also observed that a higher volume of foam occurred during fermentation of hopped wort in respect to unhopped one despite a higher concentration of polypeptides in unhopped wort. It could be a consequence of a higher foaming potential of polypeptides in hopped wort. The findings of the work may result in the limitation of foaming in the fermenters and consequently the increase of the brewery productivity without using additives and compromising the quality of the final product.     

Cover Image,Volume 98, Issue 2

The cover image, by Ting Meng et al., is based on the Research Article Preferences for groundnut products among urban residents in Ghana, DOI: 10.1002/jsfa.8532 . Photo Credit: Wojciech J Florkowski.

     

Monitoring respiration and cardiac activity using fiber Bragg grating-based sensor

This paper shows the design of a fiber-based sensor for living activities in human body and the results of a laboratory evaluation carried out on it. The authors have developed a device that allows for monitoring the vibrations of human body evoked by living activities--breathing and cardiac rhythm. The device consists of a Bragg grating inscribed into a single mode optical fiber and operating on a wavelength of around 1550?nm. The fiber Bragg grating (FBG) is mounted inside a pneumatic cushion to be placed between the backrest of the seat and the back of the monitored person. Deformations of the cushion, involving deformations of the FBG, are proportional to the vibrations of the body leaning on the cushion. Laboratory studies have shown that the sensor allows for obtaining dynamic strains on the sensing FBG in the range of 50-124 μ strain caused by breathing and approximately 8.3 μstrain induced by heartbeat, which are fully measurable by today's FBG interrogation systems. The maximum relative measurement error of the presented sensor is 12%. The sensor's simple design enables it to be easily implemented in pilot's and driver's seats for monitoring the physiological condition of pilots and drivers.     

Impact of heating method on the flocculation process using thermosensitive polymer

The impact of suspension heating method on the flocculation process using thermosensitive polymer is reported in this paper. In experiments a model suspension of chalk in RO water (purified by Reverse Osmosis) was destabilized using a copolymer of N-isopropylacrylamide (NIPAM) andcationic diallyldimethyl ammonium chloride (DADMAC). The measurements were made using a laboratory setup consisting of a mixing tank with four baffles, Rushton turbine, laser particle sizer Analysette 22 by Fritsch and a system of pump and thermostating devices. Two different modes of heating were used. In the first case the temperature of the system was gently raised above the Lower Critical Solution Temperature (LCST) using an electrical heater placed inside the tank, while in the second case the system temperature was rapidly raised by an injection of hot water directly into the tank. It was proven that heating method as well as the polymer concentration was crucial to the shape and size of created flocs.     

The Effect of Conjugation with Octaarginine,a Cell-Penetrating Peptide on Antifungal Activity of Imidazoacridinone Derivative

Acridine cell-penetrating peptide conjugates are an extremely important family of compounds in antitumor chemotherapy. These conjugates are not so widely analysed in antimicrobial therapy, although bioactive peptides could be used as nanocarriers to smuggle antimicrobial compounds. An octaarginine conjugate of an imidazoacridinone derivative (Compound 1-R8) synthetized by us exhibited high antifungal activity against reference and fluconazole-resistant clinical strains (MICs ≤ 4 μg mL⁻¹). Our results clearly demonstrate the qualitative difference in accumulation of the mother compound and Compound 1-R8 conjugate into fungal cells. Only the latter was transported and accumulated effectively. Microscopic and flow cytometry analysis provide some evidence that the killing activity of Compound 1-R8 may be associated with a change in the permeability of the fungal cell membrane. The conjugate exhibited low cytotoxicity against human embryonic kidney (HEK-293) and human liver (HEPG2) cancer cell lines. Nevertheless, the selectivity index value of the conjugate for human pathogenic strains remained favourable and no hemolytic activity was observed. The inhibitory effect of the analysed compound on yeast topoisomerase II activity suggested its molecular target. In summary, conjugation with R8 effectively increased imidazoacridinone derivative ability to enter the fungal cell and achieve a concentration inside the cell that resulted in a high antifungal effect.     

Atorvastatin Modulates the Efficacy of Electroporation and Calcium Electrochemotherapy

Electroporation is influenced by the features of the targeted cell membranes, e.g., the cholesterol content and the surface tension of the membrane. The latter is eventually affected by the organization of actin fibers. Atorvastatin is a statin known to influence both the cholesterol content and the organization of actin. This work analyzes the effects of the latter on the efficacy of electroporation of cancer cells. In addition, herein, electroporation was combined with calcium chloride (CaEP) to assess as well the effects of the statin on the efficacy of electrochemotherapy. Cholesterol-rich cell lines MDA-MB231, DU 145, and A375 underwent (1) 48 h preincubation or (2) direct treatment with 50 nM atorvastatin. We studied the impact of the statin on cholesterol and actin fiber organization and analyzed the cells’ membrane permeability. The viability of cells subjected to PEF (pulsed electric field) treatments and CaEP with 5 mM CaCl₂ was examined. Finally, to assess the safety of the therapy, we analyzed the N-and E-cadherin localization using confocal laser microscopy. The results of our investigation revealed that depending on the cell line, atorvastatin preincubation decreases the total cholesterol in the steroidogenic cells and induces reorganization of actin nearby the cell membrane. Under low voltage PEFs, actin reorganization is responsible for the increase in the electroporation threshold. However, when subject to high voltage PEF, the lipid composition of the cell membrane becomes the regulatory factor. Namely, preincubation with atorvastatin reduces the cytotoxic effect of low voltage pulses and enhances the cytotoxicity and cellular changes induced by high voltage pulses. The study confirms that the surface tension regulates of membrane permeability under low voltage PEF treatment. Accordingly, to reduce the unfavorable effects of preincubation with atorvastatin, electroporation of steroidogenic cells should be performed at high voltage and combined with a calcium supply.