Manganese ferrite nanoparticles synthesized through a nanocasting route as a highly active Fenton catalyst

Spinel ferrite MnFe₂O₄ nanoparticles were synthesized by means of a nanocasting technique using a low-cost mesoporous silica gel as a hard template. The magnetic nanoparticles, of <10 nm diameter and with a surface area of around 100 m²/g, were tested as a heterogeneous Fenton catalyst for the decomposition of hydrogen peroxide under neutral and basic conditions. This catalyst shows a much higher activity than previous heterogeneous catalysts reported in the literature, which is mainly ascribed to its small particle size. Furthermore, the magnetic catalyst can be easily separated from the reaction medium by means of an external magnetic field. The effects of residual silica and the purity of the catalyst (hematite formation) on catalytic activity have been studied and correlated. The results obtained show this catalyst to be a suitable candidate for the removal of pollutants in wastewaters by means of the Fenton heterogeneous reaction.     

Iron, folic acid and vitamin B12 deficiencies related to anemia in adolescents from a region with a high incidence of congenital malformations in Venezuela

Since in recent years for certain age groups, the main cause of anemia is not iron deficiency, we intended to study the effect of iron, folic acid and vitamin B12 deficiencies on anemia prevalence in adolescents from Venezuela. One hundred adolescents aged between 12 and 19 years participated in the study. Each subject was interviewed about antecedents and habits and a physical examination and a 24-hour food recall questionnaire were performed. From a blood sample, hemoglobin and hematocrit concentrations were determined and serum was separated for quantification of ferritin, folic acid and vitamin B12 concentrations. Prevalence of anemia was 78% and for iron, folic acid and vitamin B12 deficiencies were 34.66, 90.9 and 18.18%, respectively. From anemic cases, 35.89% presented iron deficiency, while 91.02% presented folic acid deficiency. Only 19.23% of adolescents with anemia presented also vitamin B12 deficiency, but all the cases with vitamin B12 deficiency, were anemic. Simultaneous iron and folic acid deficiencies affected 30.76% of anemic cases. The high prevalence of deficiencies found in this work could be explained by insufficient intake and inadequate food habits. The prevalence of anemia was associated to folic acid deficiency rather than to iron deficiency, due to the high prevalence of folic acid deficiency. The high prevalence of nutritional deficiencies found in this work, especially regarding folic acid deficiency, require immediate interventions.     

Engineering of functional supramacromolecular complexes of proteins (enzymes) using reversed micelles as matrix microreactors

The size of the inner water cavity of reversed micelles formedin a triple system ‘water-surfactant-organic solvent’can be widely varied by changing the degree of surfactant hydration.This gives grounds to use reversed micelles as matrix microreactorsfor the design of supramolecular complexes of proteins. Usingultracentrifugation analysis, it has been demonstrated thatthe oligomeric composition of various enzymes (ketoglutaratedehydrogenase, alkaline phosphatase, lactic dehydrogenase, glyceraldehyde-3-phosphatedehydrogenase) solubilized in reversed micelles of Aerosol OT[sodium bis(2-ethylehexyl)sulfosuccinate] in octane changesupon variation of the degree of hydration. An oligomeric complexforms under conditions when the radius of the micelle innercavity is big enough to incorporate this complex as a whole.At lower degrees of hydration the micelles ‘uncouple’such complexes to their components. The catalytic propertiesof various oligomeric complexes have been studied. Possibilitiesof using reversed micelles for the separation of subunits ofoligomeric enzymes under non-denaturating conditions have beendemonstrated. In particular, the isolated subunits of alkalinephosphatase, lactic dehydrogenase and glyceralde-hyde-3-phosphatedehydrogenase have been found to be active in Aerosol OT reversedmicelles. The dependences of the catalytic activity of oligomericenzymes represent saw-like curves. The maxima of the catalyticactivity observed at these curves relate to the functioningof various oligomeric forms of an enzyme. The radii of the micelleinner cavity under conditions when these maxima are observedcorrelate with the linear dimensions of the enzyme oligomericforms. Correlation of the position of a maximum with the shapeof an oligomeric complex is discussed.     

Towards language-to-language transformation

This paper proposes a simplicity-oriented approach and framework for language-to-language transformation of, in particular, graphical languages. Key to simplicity is the decomposition of the transformation specification into sub-rule systems that separately specify purpose-specific aspects. We illustrate this approach by employing a variation of Plotkin’s Structural Operational Semantics (SOS) for pattern-based transformations of typed graphs in order to address the aspect ‘computation’ in a graph rewriting fashion. Key to our approach are two generalizations of Plotkin’s structural rules: the use of graph patterns as the matching concept in the rules, and the introduction of node and edge types. Types do not only allow one to easily distinguish between different kinds of dependencies, like control, data, and priority, but may also be used to define a hierarchical layering structure. The resulting Type-based Structural Operational Semantics (TSOS) supports a well-structured and intuitive specification and realization of semantically involved language-to-language transformations adequate for the generation of purpose-specific views or input formats for certain tools, like, e.g., model checkers. A comparison with the general-purpose transformation frameworks ATL and Groove, illustrates along the educational setting of our graphical WebStory language that TSOS provides quite a flexible format for the definition of a family of purpose-specific transformation languages that are easy to use and come with clear guarantees.

     

Extended bisection method for parameter identification of the transient heat conduction equation for thermo-elastic deformations during drilling

A new interdisciplinary approach is discribed to identifying unknown parameters using an extended version of the known interval bisection method. This developed method is based on the use of finite elements for calibrating the simulation calculation. The resulting thermo-elastic deformations which occur in drilling processes with impaired cooling lubrication are to be used as correction values for tool positioning in the NC control. Based on the strong impact on workpiece temperature of machining, a simulation approach is presented for calculating the temperature fields and their thermo-elastic consequences. In addition, methods are presented to correct these effects. This paper particularly deals with the temperature fields of drilling operations. Special attention is paid to the technique employed for iterative numerical determination of the unknown heat flux η _w and heat transfer coefficient \(\bar {\gamma }\) values. Finally, the data obtained from experiments are compared with those achieved by numerical simulation in order to verify the efficiency of simulation and determination of parameters.     

A customised approach to determining the geomorphic effectiveness of small flood events in a regulated river

The construction of dams significantly alters flow and sediment regimes with subsequent deleterious effects on the morphological and ecological character of rivers. Effective experimental floods can ameliorate the downstream geomorphic impacts of dams. The traditional view is that large floods are required to perform effective geomorphic work, and the geomorphic outcomes of small floods are often overlooked. Many river restoration frameworks do not consider small floods. Yet, there is evidence that the hydrological characteristics that ameliorate specific geomorphic impacts in a river are unique to each river, and a customised approach to setting the right mix of floods (including small experimental floods) is needed. In this study, we modify an existing flood effectiveness model developed for large floods, for determining the geomorphic effectiveness of small floods in a highly regulated Australian river. Two flood classes were added to the model (medium peak stream power and moderate total energy expenditure), and the flood power characteristics were rescaled to reflect the relative difference in the magnitude of the small floods and the magnitude of the geomorphic work performed. Using a step‐wise approach, this customised model determined the geomorphic effectiveness of small floods. The best flood for ameliorating the geomorphic impacts of flow regulation had medium to long duration (10 to 51 days), high peak unit stream power (77 to 123 Wm^?2) and moderate to large total energy expenditure (78,600 to 342,320 × 10³ J). This approach to determining flood effectiveness for small floods is applicable to other geomorphically impacted river channels downstream of dams and can be used to inform experimental flood releases for geomorphic outcomes.     

“From microtiter plates to droplets” tools for micro-fluidic droplet processing

Droplet-based microfluidic allows high throughput experimentation in with low volume droplets. Essential fluidic process steps are on the one hand the proper control of the droplet composition and on the other hand the droplet processing, manipulation and storage. Beside integrated fluidic chips, standard PTFE-tubings and fluid connectors can be used in combination with appropriate pumps to realize almost all necessary fluidic processes. The segmented flow technique usually operates with droplets of about 100–500 nL volume. These droplets are embedded in an immiscible fluid and confined by channel walls. For the integration of segmented flow applications in established research workflows—which are usually base on microtiter plates—robotic interface tools for parallel/serial and serial/parallel transfer operations are necessary. Especially dose–response experiments are well suited for the segmented flow technique. We developed different transfer tools including an automated “gradient take-up tool” for the generation of segment sequences with gradually changing composition of the individual droplets. The general working principles are introduced and the fluidic characterizations are given. As exemplary application for a dose–response experiment the inhibitory effect of antibiotic tetracycline on Escherichia coli bacteria cultivated inside nanoliter droplets was investigated.     

Reliable Communication Networks for Smart Grid Transmission Systems

In this paper, we discuss the communications reliability requirements posed by the smart power grid with a focus on communications in support of wide area situational awareness. Implementation of wide area situational awareness relies on both transmission substation networks and wide area optical networks. We study the reliability of a sample communications network of the California Power Grid and find that its reliability falls short of proposed requirements. To overcome this issue, we consider the problem of designing the substation network and the wide area network to meet the reliability requirements while minimizing the network cost. For the wide area network design problem, we propose two alternate design approaches, namely: (1) following the power lines and (2) a mesh based design interconnecting the nodes. For the first approach we develop two greedy iterative heuristics and a heuristic integer linear programming (H-ILP) model using minimum cut-sets for network reliability optimization. The greedy iterative algorithms outperform the H-ILP approach in terms of cost, but require a larger amount of computing resources. Both proposed models are in fact complementary and thus provide a framework to optimize the reliability of smart grid communications networks restricted to following the power lines. In the second approach a greenfield mesh network method is proposed based on starting with a minimum spanning tree which is then augmented through a greedy heuristic into a mesh. Comparative numerical results show that the reliable mesh design has advantages in terms of the number of links and total link distance needed.