Droplet deformation and break-up under shear: Hydrocolloid solution vs. suspension of starch granules

Shear induced deformation and rupture of two types of droplets, hydroxypropyl methylcellulose (HPMC) aqueous solution and modified waxy maize suspension, were studied and compared using a counter-rotating rheo-optical set-up. The motivation of the work was to explain the difference observed in flavour perception of food products thickened by these two fluids. A droplet of either fluid was placed into silicon oil and deformation and break-up were monitored as a function of applied shear stress and strain. It was found that starch suspension droplets broke up at lower deformation stress and strain than HPMC solution droplets despite viscosity ratio and capillary number suggesting the opposite. It is hypothesised that the ease with which droplets thickened by starch break-up is responsible for their rapid mixing with saliva.     

Comparison of two techniques for reliable characterization of thin metal-dielectric films

In the present study we determine the optical parameters of thin metal-dielectric films using two different characterization techniques based on nonparametric and multiple oscillator models. We consider four series of thin metal-dielectric films produced under various deposition conditions with different optical properties. We compare characterization results obtained by nonparametric and multiple oscillator techniques and demonstrate that the results are consistent. The consistency of the results proves their reliability.     

Design, production, and reverse engineering of two-octave antireflection coatings

We deal with design and production of optimal two-component antireflection (AR) coatings for an ultra broadband spectral range from 450 nm to 1800 nm. We demonstrate the whole design-production chain including design selection, choosing monitoring technique, coating production, and reverse engineering of the deposited coatings. At each step of this chain we provide thorough analysis on the basis of theoretical results and adequate computational manufacturing experiments. In order to produce the designed AR coatings we use magnetron sputtering deposition technique and accurate time monitoring.     

Delivery of iPS‐NPCs to the Stroke Cavity within a Hyaluronic Acid Matrix Promotes the Differentiation of Transplanted Cells

Stroke is the leading cause of adult disability with ≈80% being ischemic. Stem cell transplantation has been shown to improve functional recovery. However, the overall survival and differentiation of these cells is still low. The infarct cavity is an ideal location for transplantation as it is directly adjacent to the highly plastic peri‐infarct region. Direct transplantation of cells near the infarct cavity has resulted in low cell viability. Here, neural progenitor cells derived from induce pluripotent stem cells (iPS‐NPC) are delivered to the infarct cavity of stroked mice encapsulated in a hyaluronic acid hydrogel matrix to protect the cells. To improve the overall viability of transplanted cells, each step of the transplantation process is optimized. Hydrogel mechanics and cell injection parameters are investigated to determine their effects on the inflammatory response of the brain and cell viability, respectively. Using parameters that balanced the desire to keep surgery invasiveness minimal and cell viability high, iPS‐NPCs are transplanted to the stroke cavity of mice encapsulated in buffer or the hydrogel. While the hydrogel does not promote stem cell survival one week post‐transplantation, it does promote differentiation of the neural progenitor cells to neuroblasts.     

Structure and optical properties of heterostructures based on MOCVD (Al x Ga1 − x As1 − y P y )1 − z Si z alloys

Epitaxial heterostructures produced by MOCVD on the basis of Al _x Ga_{1 ? x} As ternary alloys with the composition parameter x ≈ 0.20–0.50 and doped to a high Si and P atomic content are studied. Using the high-resolution X-ray diffraction technique, scanning electron microscopy, X-ray microanalysis, Raman spectroscopy, and photoluminescence spectroscopy, it is shown that the epitaxial films grown by MOCVD are formed of five-component (Al _x Ga_{1 ? x} As_{1 ? y} P _y )_{1 ? z} Si _z alloys.     

Inactivation Kinetics of Geobacillus stearothermophilus Spores in Water Using High-pressure Processing at Elevated Temperatures

ABSTRACT: Establishment of a high-pressure sterilization process requires data on pressure and temperature-dependent inactivation kinetics of target pathogenic, spoilage, or surrogate spore-forming bacteria in the food being tested. The objective of this study was to examine the response of Geobacillus stearothermophilus ATCC10149 spores to various temperature, time, and pressure combination treatments (500 to 700 MPa; 92°C to 111°C, 0.01 to 360 s). The pressure inactivation of spores was characterized at elevated temperatures under isobaric and isothermal conditions during the holding time using a laboratory-scale high-pressure unit. The inactivation kinetics was well described by the log-linear regression model. As expected, the rate of spore inactivation increased with increasing pressure and temperature. Decimal reduction times at constant pressure ( D _T,P values) varied from 29.4 to 108.8 s at 92°C, 17.4 to 76 s at 100°C, and 6.1 to 51.3 s at 111°C within the pressure range of 500 to 700 MPa. The resistance of spores to temperature and pressure was characterized with z_T and z_P values and compared with their resistance to conventional steam heating. The conventional thermal resistance of G. stearothermophilus species did not correlate to the thermal resistance at high pressure. The study provides kinetic data on the effects of pressure and temperature on the inactivation of a heat-resistant bacterial spore species under conditions applicable to the commercial processing of low-acid foods.     

Polymerized micelles. Fixation of micelle structure by the core cross-linking

Summary Polymerized micelles of poly(11-acryloylaminoundecanoic acid) were obtained via radical polymerization in micellar state. The structure of micelles was fixed by cross-linking of the micelle core using solubilized diacrylate co-monomer. Hydrodynamic behavior of both cross-linked and non cross-linked polymerized micelles was studied by means of viscometry.