Effects of excess K+ on carbachol-induced contractions in the guinea-pig tracheal muscle

1. In smooth muscles isolated from the guinea-pig trachea, the effects of dihydropyridines, nifedipine and nicardipine on contractions produced by carbachol (Cch) were studied in normal (6 mM) and excess K+ concentration (60 mM). The tonic contraction produced by 1 microM Cch was highly dependent on the external Ca2+ concentration ([Ca2+]0) and was not significantly affected by cyclopiazonic acid or thapsigargin, Ca2+ uptake inhibitor. 2. [Ca2+]0-tension curves were steeper in the presence of 1 microM Cch (the Hill coefficient: 2.5) than in the presence of 60 mM K+ (Hill coefficient: 1.6) and their ED50 of Ca2+ was 0.16 and 0.39 mM, respectively. An increase of K+ to 60 mM in the presence of 1 microM Cch shifted the curve to the left roughly in parallel (ED50: 0.12 mM, Hill coefficient: 2.3). 3. [Ca2+]0-tension curve in the presence of 1 microM Cch was shifted to the right in parallel by nifedipine (1 microM). This was markedly potentiated by 60 mM K+ (the increase in ED50 of Ca2+ being 3 times at 6 mM and 15 times at 60 mM K+). No tension was evoked by Ca2+ up to 2.5 mM in 60 mM K+ solution containing 1 microM nifedipine but no Cch. 4. In the absence of nifedipine, Cch-induced contractions were potentiated by 60 mM K+, whereas in the presence of nifedipine, Cch-induced contractions were markedly inhibited by 60 mM K+. These mechanical changes were accompanied by an increase or a decrease in intracellular Ca2+. 5. A hypothesis is presented to explain the results which suggests that the kinetics of Ca2+ influx though a single type of pathway is modulated by membrane potential and receptor activation and that the susceptibility of the pathway to dihydropyridine blockade is closely related to the Ca2+ influx kinetics with receptor activation reducing and membrane depolarization increasing the susceptibility.     

The protein encoded by cancer/testis gene D40/AF15q14 is localized in spermatocytes, acrosomes of spermatids and ejaculated spermatozoa

We have previously identified and cloned a human gene, D40, that is preferentially expressed in testis among normal organs, while it is widely expressed in various human tumor cell lines and primary tumors derived from different organs. In this report, we have examined the expression and localization of this protein in human testis with an antibody specific to D40 protein. In Western analyses, the anti-D40 antibody recognized a major band with a molecular mass of 300 kDa and a minor band of 250 kDa. These bands were not observed in the testis lysates from patients with Sertoli-cell-only syndrome and with Kleinfelter syndrome, who lack germ cells of the testis, indicating that D40 protein is expressed in the germ cells of normal testis. Immunohistochemical studies have revealed that D40 protein is highly expressed in spermatocytes and in the pre-acrosome of round spermatids. In the acrosome, D40 protein expression is observed not inside but outside the acrosome membrane. This is consistent with the finding that the amino-acid sequence at the amino terminal of the D40 protein lacks a hydrophobic signal peptide that is required for proteins to translocate to the membrane. Expression of D40 protein is observed in the acrosome of ejaculated spermatozoa as well, although the level is low compared with that in the pre-acrosome of spermatids. These results suggest that D40 protein plays important roles in spermatogenesis, especially in the formation and maintenance of the acrosome.     

A Novel KCaNi/α-Al2O3 Catalyst for CH4 Reforming with CO2

A potassium and calcium co-promoted nickel catalyst (KCaNi/-Al₂O₃) prepared by a direct impregnation method possessed a high activity, high stability and excellent coke resistance properties in CH₄ reforming with CO₂. XRD, XPS and H₂-TPR characterizations indicated that (i) Ca and K strengthened the interaction between Ni and -Al₂O₃ and promoted the formation of a unique NiAl₂O₄ phase on the surface of the catalyst and (ii) Ca and K increased the dispersion of Ni and retarded its sintering. Coking reactions (CH₄ temperature-programmed decomposition and O₂-TPO) disclosed that K reduced carbon formation via CH₄ decomposition.     

Fatigue characteristics of ultra high molecular weight polyethylene with different molecular weight for implant material

In order to investigate the effect of molecular weight on fatigue characteristics in the ultra high molecular weight polyethylene (UHMWPE), tension–tension fatigue tests of notched specimens were carried out in the present study. The effects of frequency and stress ratio on the fatigue characteristics were also investigated and fractography was discussed. The fatigue strength does not increase with increasing molecular weight. The fatigue strength might be influenced by the high degree of crystallinity in spite of the decreased tie molecule density in this study. Almost no effect of frequency on the number of cycles to failure can be observed. However, the higher the frequency, the higher the crack tip temperature. The effects of heat and strain rate on the fatigue strength must be considered in polymer materials. At a high stress ratio, the stress–number of cycles to failure (S–N) curves shift to high number cycles to failure side. Both stress amplitude and mean stress influence the fatigue life of UHMWPE. © 2001 Kluwer Academic Publishers     

Lipase production in two-step fed-batch culture of organic solvent-tolerant Pseudomonas aeruginosa LST-03

Efficient lipase production by two-step fed-batch culture of an organic solvent-tolerant bacterium, Pseudomonas aeruginosa LST-03, was investigated. When FB synthetic medium was used in flask culture, no lipase activity was detected, whereas lipase was produced at 2.3 I.U./ml in C2 complex medium. However, lipase production was induced in FB medium when a fatty acid was added to the culture broth in the stationary phase. Among fatty acids tested, long chain saturated fatty acids, such as C18 (stearic acid) and C20 (arachidic acid), were found to function as effective inducers for the production of lipase, giving an activity level almost the same as that obtained in C2 medium in flask culture. Two-step lipase production, comprised of a growth phase in fed-batch mode and a production phase in which lipase was induced by the addition of 5% (v/v) stearic acid, was carried out in a jar-fermentor. In the growth phase, the maximum cell concentration at 16 h was only 20 in terms of the optical density at 660 nm (OD660), and a low level of lipase production (8 I.U./ml) was obtained after 167 h. This was considered to be due to the exhaustion of several medium components brought about by the use of an unsuitable medium or feeding solution. After analyzing the contents of the compounds in the culture broth by inductively coupled plasma spectrometry for metal ions and HPLC for anions, a modified FB medium was designed. When this modified FB medium was used in two-step fed-batch culture, the maximum cell concentration reached an OD660 of 55 (30.2 g-dry cells/l) at 16.5 h, and lipase was produced at 96 I.U./ml after 35 h, which is approximately 40 times higher than the production level obtained in flask culture using C2 medium.     

Response function estimation with fine energy bins for the energy-resolved computed tomography using a transXend detector

A new ‘transXend’ detector system has been developed for energy-resolved computed tomography (CT). It consists of several segmented detectors that measure X-rays as electric currents. Response functions of segmented detectors are estimated using component materials of a body under inspection to unfold X-ray spectra. To avoid material-dependent measurements, response functions inherent to segmented detectors are evaluated by Monte Carlo calculations. CT was performed for a phantom consisting of five resins and was analyzed by the estimated response functions. The linear attenuation coefficients for the five resins have excellent agreement with database values.     

Digital Computer Control of a Research Reactor

This report describes a feasibility experiment for a fully automatic operation of Hitachi Training Reactor, emploving an digital computer control system. The system consists of a small control computer (2K words), an input-output peripherals, 3 BF3 counters and a countrol rod mechanism driven by a pulse motor.     

Shear viscosity of rubber modified thermoplastics: Dynamically vulcanized thermoplastic elastomers and ABS resins at very low stress

The shear viscosity of PP-EPDM dynamically vulcanized thermoplastic elastomers and ABS resins were investigated using (a) a constant shear stress creep instrument, (b) a rotational rheometer, and (c) a capillary extrusion rheometer. It was found that stresses exist for some of these materials below which they exhibit only finite deformations. This indicates they exhibit yield values. Much attention was given to measurements of creep at low stresses especially in the neighborhood of yield values. The magnitudes of the yield stresses obtained from these low stress measurements are significantly lower than those obtained using standard extrapolation to zero shear rate of higher stresses from rotational instruments. We also observed a high shear viscosity (～10⁹ PA s) plateau in the materials of high rubber content. We contrasted our results to those found in the literature.     

Studies on anti-inflammatory agents. V. Synthesis and pharmacological properties of 3-(difluoromethyl)-1-(4-methoxyphenyl)-5- [4-(methylsulfinyl)phenyl]pyrazole and related compounds

A series of novel 1,5-diphenylpyrazole derivatives bearing hydrophilic substituents was prepared. The anti-inflammatory and analgesic activities of these compounds were evaluated by using the adjuvant arthritis and Randall-Selitto assays in rats, and the structure-activity relationships were studied. The optimal compound was 3-(difluoromethyl)-1-(4-methoxyphenyl)-5-[4-(methylsulfinyl)phenyl]pyraz ole (10) with oral ED50 values of 0.31 and 2.6 mg/kg on adjuvant-induced arthritis and carrageenin-induced foot edema, respectively. Compound 10 showed analgesic activities not only toward inflamed paw but also toward normal paw (ED30 = 0.55 and 1.8 mg/kg, respectively) in the Randall-Selitto assay, and moreover, 10 was effective in the tail-pinch assay (ED50 = 21 mg/kg) similarly to morphine. The asymmetric synthesis and pharmacological properties of the enantiomers of 10 are also reported.