Microstructure and Mechanical Property Correlation of Mg-Si Alloys

Silicon - The present work aims at understanding the microstructure and mechanical property correlation of hypo (Mg-0.5, 0.7, 1.15 wt% Si) and hyper (Mg-2, 4, 6, 8 and 10 wt% Si) eutectic binary...     

Radiation performance of planar junctionless devices and junctionless SRAMs

The objective of this work is to analyze the radiation performance of the planar junctionless devices and junctionless device-based SRAMs. Bulk planar junctionless transistor (BPJLT) and silicon-on-insulator planar junctionless transistors (SOIPJLT) under heavy ions irradiation have been studied using TCAD simulations. 6T-SRAM cells built up of BPJLTs and SOIPJLTs have been investigated for their soft error performance. Even though the bipolar amplification of the SOIPJLT is more compared to BPJLT, the soft error performance of the SOIPJLT SRAM is better compared to BPJLT SRAM.     

Large Eddy Simulation of Turbulent Slot Jet Impingement Heat Transfer at Small Nozzle-to-Plate Spacing

We present fluid flow and heat transfer of a slot jet impingement heat transfer at a small value of the nozzle-to-plate spacing at which a secondary peak in the Nusselt number is observed. Large eddy simulation has been performed with a finite-volume-based computational fluid dynamics code and using a dynamic Smagorinsky model. The optimum domain size and grid for large eddy simulation (LES) have been produced based on LES computations on a coarse mesh and Reynolds-averaged Navier–Stokes-based computations. Two inflow conditions, namely, using the vortex method and no perturbations, were compared. The present LES results, using the vortex method, capture the secondary peak in the Nusselt number better as compared to the case with no perturbations. Results show that mean velocity profile in the stagnation region deviates from the standard law of the wall. Further, large-scale vortical structures were observed near the location of the secondary Nusselt number peak. Increases in both the streamwise and wall normal turbulence fluctuations are observed near the secondary peak in the Nusselt number. The secondary peak in Nusselt number is found to be associated with the combined effect of flow acceleration and an increase in the turbulence kinetic energy.     

Leak-before-break analysis of Prototype Fast Breeder Reactor main vessel

In Prototype Fast Breeder Reactor, the core is immersed in a sodium pool contained within the main vessel (MV). There is an argon cover gas space over the sodium. Top Shield supports the control plug which houses important components such as Control and Safety Rod Driving Mechanism. A core support structure welded to the bottom of MV carries the Grid plate which in turn supports the fuel subassemblies. MV is a cylindrical shell with a bottom dished end and supported at the top. Double ended guillotine rupture of MV will lead to downward movement of the core, which is in effect equivalent to withdrawal of control and safety rod and thus causing a series safety concern. It is essential to demonstrate Leak Before Break (LBB) argument for MV. LBB argument is justified if leak detection is ensured with adequate margin on critical crack length corresponding to failure by tearing instability. The material of construction of MV is SS316 LN. Towards assuring the justification of LBB argument, an isolated 5 mm deep X 200 mm long semi elliptical flaw is taken as the initial flaw and analysed under fatigue loading. A through wall crack in the argon space can be detected by sampling the nitrogen in the annular space between MV and safety vessel surrounding it. Accordingly the detectable crack length is arrived at. The critical crack length is obtained considering stable tearing. More details of the analysis and justification of LBB argument as per RCC-MR Appendix A16 are presented in the paper.     

Microstructural refinement and tensile properties enhancement of Mg-3Al alloy using charcoal additions

Significant grain refinement in Mg-3Al alloy is achieved with the addition of charcoal due to the formation of Al₄C₃ particles, which act as effective nuclei for magnesium grains. Addition of 0.5 wt% charcoal has lead to reduced grain size of Mg-3Al alloy from 500 to 80 μm and no substantial grain refinement is obtained on further addition of charcoal. The results further reveal that the prolonged holding of the melt after the addition of charcoal has not affected the grain refining efficiency of Al₄C₃. Steady increase in tensile properties observed with increasing amount of charcoal addition has been attributed to the grain refinement and the presence of fine Al₄C₃ particles. The strengthening mechanisms due to charcoal addition are discussed in terms of Hall-Petch relation and dispersion strengthening. The predicted values are in good agreement with experimental results.     

Performance evaluation of batch and unsteady state fed‐batch reactor operations for the production of a marine microbial surfactant

BACKGROUND: Biosurfactants are microbially derived surface‐active and amphipathic molecules produced by various microorganisms. These versatile biomolecules can find potential applications in food, cosmetics, petroleum recovery and biopharmaceutical industries. However, their commercial use is impeded by low yields and productivities in fermentation processes. Thus, an attempt was made to enhance product yield and process productivity by designing a fed‐batch mode reactor strategy. RESULTS: Biosurfactant (BS) production by a marine bacterium was performed in batch and fed‐batch modes of reactor operation in a 3.7 L fermenter. BS concentration of 4.61 ± 0.07 g L^?1 was achieved in batch mode after 22 h with minimum power input of 33.87 × 10³ W, resulting in maximum mixing efficiency. The volumetric oxygen flow rate (K_La) of the marine culture was about 0.08 s^?1. BS production was growth‐associated, as evident from fitting growth kinetics data into the Luedeking‐Piret model. An unsteady state fed batch (USFB) strategy was employed to enhance BS production. Glucose feeding was done at different flow rates ranging from 3.7 mL min^?1 (USFB‐I) to 10 mL min^?1 (USFB‐II). USFB‐I strategy resulted in a maximum biosurfactant yield of 6.2 g l^?1 with an increment of 35% of batch data. The kinetic parameters of USFB‐I were better than those from batch and USFB‐II. CONCLUSION: Comparative performance evaluation of batch and semi‐continuous reactor operations was accomplished. USFB‐I operation improved biosurfactant production by about 35% over batch mode. USFB‐I strategy was more kinetically favorable than batch and USFB‐II. © 2012 Society of Chemical Industry     

Antihyperlipidemic effect of diosmin: A citrus flavonoid on lipid metabolism in experimental diabetic rats

The present study was hypothesized to evaluated the antihyperlipidemic effect of diosmin (DS) on lipid metabolism in experimental diabetic rats. Diabetes was induced male albino Wistar rats by intraperitoneal administration of streptozotocin (STZ) (45 mg/kg b.w.) 15 min after the ip administration of nicotinamide (NA) (110 mg/kg b.w.). DS were administered to diabetic rats intragastrically at 100 mg/kg b.w. for 45 days. The levels of plasma and tissue lipids (cholesterol, triglycerides) (TGs), free fatty acids (FFAs) and phospholipids (PLs), low density, very low-density lipoproteins (LDL and VLDL), and high-density-cholesterol (HDL-C) were measured. The activities of 3-hydroxy 3-methylglutaryl coenzyme A (HMG-CoA) reductase, lipoprotein lipase (LPL) and lecithin cholesterol acyl transferase (LCAT) were assayed. The levels of plasma and tissue lipids decreased with significant increase in HDL-C levels. The altered activities of lipid metabolic enzymes were restored to near normal. The present findings suggest that DS can potentially ameliorate lipid abnormalities in experimental diabetes.     

Experimental Investigation and Simulation of Magnetic Flux Leakage from Metal Loss Defects

Journal of Failure Analysis and Prevention - Magnetic flux leakage (MFL) principle is widely used in detecting defects in cross-country pipelines. The tools based on the MFL techniques termed as...     

Novel genetic algorithm for short-term scheduling of sequence dependent changeovers in multiproduct polymer plants

Polymer plants generally operate to produce different grades of product from the same reactor. Such systems commonly require short-term scheduling to meet market demand. One important requirement in continuous-time scheduling of such systems is to satisfy a variety of constraints, including identifying feasible sequences of the predecessor and successor jobs to effectively handle changeovers. In this study, a new genetic algorithm (GA) is proposed to solve such job sequencing problems. The proposed GA uses real-coded chromosome to represent job orders and their sequences in the schedule. The novelty is that the representation ensures that all constraints are satisfied a priori, except the sequence constraint which is handled by penalizing violations. Three important problems relevant to polymer industry are solved to obtain optimal schedules. The first deals with the sequencing constraint between individual product orders, the second with sequencing constraint between groups of product orders, while the third incorporates batching with scheduling.