Enzymatic Interesterification of High Oleic Sunflower Oil and Tripalmitin or Tristearin

The objective of this study was to produce low saturated, zero‐trans, interesterified fats with 20 or 30 % saturated fatty acids (SFA) such as C16:0 or C18:0. Tripalmitin (TP) or tristearin (TS) was blended with high oleic sunflower oil (HOSO) at different ratios (0.1:1, 0.3:1, and 0.5:1 [w/w]). Total C16:0 and C18:0 compositions of the resulting TP/HOSO and TS/HOSO blends, respectively, were plotted against blending ratios. Linear interpolation was used to estimate blending ratios that would yield physical blends (PB) with 20 or 30 % SFA. Interesterified blends (IB) were then synthesized from the customized PB using Lipozyme TL IM as the biocatalyst. Total and sn‐2 fatty acid compositions, triacylglycerol (TAG) molecular species, thermal behavior, and oxidative stability of PB and IB were compared. The total fatty acid compositions of PB and IB were similar but fatty acid positional distributions and TAG molecular species composition differed. IB contained 5–10 % more SFA at the sn‐2 position than corresponding PB. Furthermore, interesterification generated mono‐ and disaturated TAG species which resulted in broader melting profiles for IB. However, IB had lower oxidative stability than PB. The reformulation of food products with zero‐trans interesterified fats may be advantageous to the reduction of cardiovascular disease burden in the population.     

Efficiency of 4,4′‐bis(N,N‐diethylamino) benzophenone for the polymerization of dimethacrylate resins in thick sections

The efficiency of 4,4′‐bis(N,N‐diethylamino)benzophenone (DEABP) for the polymerization of dimethacrylate monomers in thick sections ( 1 – 2 mm) was studied. DEABP (λ_max = 365 nm) represents a complete initiating system as it contains both ketone and amine functional groups. During irradiation, DEABP photobleaches at a fast rate causing deeper penetration of light through the underlying layers, but the photoinitiation efficiency (rate of polymerization per photon absorption rate) is relatively poor. As a result, irradiation of methacrylate monomers at 365 nm results in a slow average polymerization rate and a reduced monomer conversion for thick sections due to the light attenuation caused by the high absorptivity of DEABP and photolysis products. These results highlight the inherent interlinking of light attenuation and photobleaching rate in polymerization of thick sections. Copyright © 2011 Society of Chemical Industry     

Vacuum-based preservation of surgical specimens: An environmentally-safe step towards a formalin-free hospital

Formalin as a fixative has no practical substitutes, but is toxic and potentially carcinogenic, so caution of its use in hospitals and elsewhere is mandatory. In our hospital, preservation of surgical specimens into formalin to be transferred to pathology labs was replaced by under-vacuum sealing (UVS) tissues into plastic bags and preservation at 4 °C until transfer. Data analysis showed UVS processing to be superior in terms of staff satisfaction and of gross anatomic preservation; no problems in terms of technical feasibility or histopathologic preservation were encountered. Formalin was confined to pathology labs while its use on hospital premises was vastly reduced.     

Implicit Riquier Bases for PDAE and their semi-discretizations

Complicated nonlinear systems of pde with constraints (called pdae) arise frequently in applications. Missing constraints arising by prolongation (differentiation) of the pdae need to be determined to consistently initialize and stabilize their numerical solution. In this article we review a fast prolongation method, a development of (explicit) symbolic Riquier Bases, suitable for such numerical applications. Our symbolic-numeric method to determine Riquier Bases in implicit form, without the unstable eliminations of the exact approaches, applies to square systems which are dominated by pure derivatives in one of the independent variables.     

Assessment of river Po sediment quality by micropollutant analysis

Trace metals, PCB congeners and DDT homologues were determined in composite sediment samples collected from 10 representative sites along the river Po in two separate seasons. The aim was to identify the most anthropogenically impacted areas for future monitoring programmes and to aid development of Italian sediment quality criteria. The surface samples were collected during low flow conditions. Trace metal concentrations were assayed by electrothermal (Cd, Co, Cr, Cu, Ni, Pb), flame (Fe, Mn, Zn) or hydride generation (As) atomic absorption spectrometry after microwave assisted acid digestion. Hg was determined on solid samples by automated analyser. Organic microcontaminants were determined by gas-chromatography with 63Ni electron capture detector after Soxhlet extraction. Concentrations of trace metals, total PCB and DDT homologues showed two distinct peaks at the sites immediately downstream of Turin and Milan, respectively, and in each case decreased progressively further downstream. Principal component analysis identified three major factors (from a multi-dimensional space of 35 variables) which explained 85-90% of the total observed variance. The first and second factors corresponded to anthropogenic inputs and geological factors on sediment quality; the third included seasonal processes of minor importance. Sediment quality assessment identified Cd, Cu, Hg, Pb, Zn and organic microcontaminants as posing the most serious threats to river sediment quality. A reference site within the Po basin provided useful background values. Moderate pollution by organochlorine compounds was ascribed both to local sources and to atmospheric deposition.     

Correlation of analyte structures with biosensor responses using the detection of phenolic estrogens as a model

The apparent increase in hormone-induced cancers and disorders of the reproductive tract in wildlife and humans has led to a search for an accurate and reliable method for monitoring endocrine-disrupting chemicals (EDCs). This study presents a generic approach that may allow researchers to establish screening procedures for potential EDCs by correlating the analyte structures with biosensor responses and explain possible reaction mechanisms. A simple amperometric tyrosinase-based biosensor (Tyr-CPE) has been developed for the detection of phenolic EDCs. The investigation of the enzymatic oxidation of selected phenolic estrogens was first carried out using UV-vis spectroscopy. The result was used to correlate sensor responses to enzymatic activity. Natural phytoestrogen polyphenols, including resveratrol (RES), genistein (GEN), and quercetin (QRC), were compared with synthetic estrogens, for example, bisphenol A (BPhA), nonylphenol (NPh), and diethylstilbestrol (DES). The Tyr-CPE biosensor resulted in rapid, simple, and accurate measurement of phenolic estrogens with varying degrees of sensitivity, selectivity, and response times. The sensor responses have been evaluated for the detection of binary and tertiary mixtures of EDCs and natural estrogens. The results showed that BPhA could be successfully discriminated in a composite mixture containing NPh and DES at various ratios. In the case of natural phenolic estrogens GEN, RES, and QRC, the sensor allows the determination of a total phenolic content. The sensor was also validated for the detection of BPhA in a real environmental water sample, and the results was compared with standard ASTM method 9065. Mechanistically, our results indicated that the number of OH groups, the nature and the position of aryl ring substituents, or both could affect the detection limit and the biosensor sensitivity.     

An Optical Thermometer Exploiting Periodically Poled Lithium Niobate for Monitoring the Pantographs of High-Speed Trains

Optical thermometers have been widely investigated. Here, the temperature behavior of second harmonic generation (SHG) in periodically poled lithium niobate (PPLN) substrates is analyzed; indeed, the QPM tuning in PPLN devices and the obtained SHG efficiency depend on the crystal thermal expansion and dispersion, particularly in the case of guided propagation. Therefore, such devices are suitable to realize optical thermometers for demanding applications. This investigation originated with the request of a thermometer to be installed on the pantographs of high-speed trains. Therefore, it must be sturdy and reliable, but it has even to work in an EMD environment. The temperature behavior of the SHG was theoretically modeled and experimentally validated at 1550 nm, in both bulk propagation and APE channel waveguides. In the first case, by using a 10-mW source, which was obtained from a laser diode and a fiber amplifier, an accuracy of 0.3 degC was found. The pump power was about three orders of magnitude smaller in guided propagation. In view of testing on the trains, our investigation resulted in the design of a device without mechanical contacts with the input and output fibers. Since it works in free propagation, there are no serious alignment and packaging problems. The performances, which are expected to be the same of our tests, widely satisfy all the requirements for working effectively in a strongly hostile and EMD environment and for giving accurate measurements on a wide range of temperatures     

Effect of temperature on hot-air drying rate and on retention of antioxidant capacity in apple leathers

Fruit leathers are pectic gels, eaten as snack or dessert, obtained by dehydrating fruit purees. In this work, apple leathers were prepared by a hot-air drying process which allows the formation of a gel, following the “saccharide–acid–high methoxyl pectin” gelation mechanism. Leathers were produced at 50, 60 and 70 °C, from two formulations: control and added with potassium metabisulphite (KM) as antioxidant. The drying process was studied applying a diffusive model, while antioxidant capacity (AC) losses were represented by a first-order model. Activation energy for drying (20.6 kJ/mol) was lower than those estimated for AC losses in control (31.5 kJ/mol) and KM-added (37.9 kJ/mol) leathers. Therefore, the drying time reduction achieved by increasing air temperature is not sufficient to decrease AC losses in the range covered. AC retention decreased in both formulations at increasing air temperature. KM-added samples showed higher AC retention than the controls, except for those dried at 70 °C. Kinetic constants were lower for KM-added samples, suggesting a protective effect of the additive, especially at moderate air temperatures. In the most favorable situation, AC retention was of only 16%. Therefore, the functional character of these products may not be preserved if dried with hot air and the research on economically viable, less-severe drying technologies should be intensified.     

Modelling the respiration rate of fresh-cut Annurca apples to develop modified atmosphere packaging

In this work, the effect of temperature, oxygen, red coloration process and post-harvest storage time on the respiration rate of fresh-cut Annurca apples was studied to properly develop modified atmosphere packaging. Our results showed that the red coloration process and the post-harvest storage time did not affect the respiration rate or the respiratory quotient of fresh-cut Annurca apples in the range of temperature studied (5–20 °C). A Michaelis–Menten-type equation, with the model constants described by means of an Arrhenius-type relationship, was used for predicting respiration rate on varying the temperature and O₂ concentration in the head space. The maximal respiration rate (mL kg h⁻¹) (RR_max) and the O₂% corresponding to     values estimated at the reference temperature (12.5 °C), i.e. the average of the experimental temperature ranges, were, respectively, 6.77 ± 0.1 mL kg⁻¹ h⁻¹ and 0.68 ± 0.07% v/v, and the activation energy of the aerobic respiration rate of fresh-cut Annurca apples was estimated at 51 ± 1 kJ mol⁻¹. The model works well to develop a modified atmosphere for fresh-cut Annurca apples.